Discontinued
|
|
Cat Code: TX/RX-AV3 $189
Bundled-Pak
|
|
Applications:
Business
Observe showrooms, warehouse, offices, entrances, etc without the need to
install expensive and inflexible wiring.
Distribute images to multiple remote Monitors (&/or Recorder) for training,
presentation or general surveillance and observation.
View images from Satellite TV, Pay TV, Cable TV, DVDs, VCRs, Computers, Cameras,
Quads, Multiplexers, etc in multiple rooms from one source without distribution
amplifiers or wiring.
Transmit your message to multiple TVs / Monitors in showrooms, tradeshows, etc
without wires.
Safety
See who is outside your door before opening it using a Video Camera and your
regular TV.
Monitor your baby, your children, the swimming pool, the elderly, ill or
recuperating using a CCTV camera or camcorder.
Features:
LIPD Band: 2400 ~ 2483 MHz (Australia 2.4 ~
2.463 GHz).
TV System: Suits all TV Systems in all Countries, operation is independent of TV
System.
Multi Channel (Australia = 2, Export = 4) Transmitter & Receiver.
Built-in PLL circuit.
Specifications:
ISM Band: 2.4 ~ 2.483 GHz (Australia 2.4 ~
2.463) Audio/Video 2 or 4 channels.
Modulation Method: FM.
Oscillator: P.L.L. (Phase Locked Loop).
Transmitter: (Cat Code: TX-Box)
Input: Composite Video 75 ohms impedance.
Input: Line Level Audio ~ 10 000 ohms impedance, LEFT Channel ONLY is used
with the Mono Receiver included in this Pak.
Antenna: Dipole Whip not-removable, (omni directional when used
vertically).
RF Output Power: 10 mW EIRP (maximum allowed).
Power Supply Requirements: ~ 14 VDC, ~ 200 mA excluding output load, 2.1 x 5.5
mm socket. 240 vac 50 Hz to 12 VDC, 0.5 A unregulated Plug Pack supplied.
DC Output: ~ 14 VDC unregulated @ 100 mA for external equipment.
Size: ~ 92 x ~ 62 x ~ 30 mm excluding sockets & antenna. ~ 189 grams.
Easily mounted on Wall or other vertical surfaces via slotted screw holes in
base plate.
Receiver:
(Cat Code: RX-COMPACT)
Output : Composite Video 75 ohm
impedance via RCA socket, compatible with CCIR, PAL, EIA, NTSC, SECAM TV
Systems.
Output : Line Level Audio via RCA socket, Output is Mono from TX Left
Channel.
Antenna Input: SMA Female Socket, 50 ohms impedance, High Gain antennas listed
below may be used to increase range, Cat Code: Ant-Whip supplied.
Power Supply Requirement: 12 ~ 14 VDC, 2.1 mm x 5.5 mm DC socket. 240 vac 50 Hz
to 12 VDC, 0.5 A unregulated Plug Pack supplied.
Current: ~ 350 mA @ 12.5 Volts
Sensitivity: -92 dbm
Dimensions: 115 mm (W) 80 mm (D) 21 mm (H) excl sockets, ~ 250 g
Need Sound ? click here
Compatibility:
Transmissions may be received
with:
RX-Box
Wireless Stereo AV Receiver with Omni Directional Antenna
RX-Mini Mini 2.4 GHz AV Receiver
TX/RX
AV System II Plug-In & Play Stereo Wireless AV System Omni-Directional
Antennas
Transmissions of Video & Left
Audio Channel may be received with:
RX-COMPACT 2.4 GHz AV Receiver
RX-TFT-56 2.4 GHz AV Receiver & 5" Colour TFT LCD Monitor
Receives transmissions from:
TX-Mini, TX-MOD 2, TX-MOD 3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500, TX-AV1000,
TX-AV2000, TX-CAM2 & TX-CAM3.
Receives transmissions of Video
& Left Audio Channel from: TX-Box & TX/RX AV System II.
RANGE
Depends on surroundings,
obstructions, buildings, antenna gain, other transmitters, EMI & RFI in the
vicinity.
In ideal, clear, Line-of-Sight
conditions
Vertical 3 dBi Whip antenna on
Receiver up to ~ 100 metres.
Correctly matched and aligned 18
dBi antenna on Receiver up to ~ 600 metres.
Due to the nature of Radio
Signals results are unpredictable (in the same manner as Mobile / Cellular
Telephones) signals reflected from surrounding objects arriving at Receiver
antenna may Add-to or Subtract-from the direct signal from Transmitter.
Directional antennas may reduce affect of reflected signals.
ANTENNAS
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on Receiver. For maximum
signal transfer TX and RX antennas should be the same polarity, that is both
oriented Vertically or Horizontally.
 |
Cat Code: Ant-Stub
(Net) $30
0 dBi gain, ~ 50
ohms impedance.
Length: ~ 52 mm.
Diameter: ~ 9 mm. Weight: ~ 6 grams.
Pictured fitted
to TX-CAM
3.
SMA male
Connector.
|
 |
Cat
Code: Ant-Whip (Gold)
(A) $12
/ (B) $15
~ 3 dBi gain, ~ 50 ohms
impedance.
Length: ~ 107 mm straight ~ 87
mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams.
SMA male Connector.
|
 |
Cat
Code: Ant-W5dB
(Gold)
(A) $24
/ (B) $30
~ 5 dBi gain, ~ 50 ohms
impedance.
Length: ~ 195 mm straight
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top.
Weight: ~ 30 grams.
SMA male Connector.
|
 |
Cat
Code: Ant-W9dB
(Gold)
(A) $103 / (B) $129
~ 9 dBi gain, ~ 50 ohms
impedance.
Length: ~ 610 mm ~ 825
mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm
main center section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730
grams with Mounting Tube & Clamps/Brackets.
Supplied with Base Mount Tube and
Clamps/Brackets for surface or Tubular Mast mounting. N
female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-W12dB (Gold)
(A) $127
/ (B) $159
~ 12 dBi gain, ~ 50 ohms
impedance.
Length: ~ 1210 mm ~ 1425 mm
with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main
center section ~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams
with Mounting Tube & Clamps/Brackets.
Supplied with Base Mount Tube
and Clamps/Brackets for surface or Tubular Mast mounting. N
female Connector. <Adaptors
& Extension Cables>
|
 |
Cat Code: Ant-Y8
(Gold)
(A) $69
/ (B) $89
Yagi ~ 8 dBi gain, ~ 50 ohms impedance. ~
500 mm RG-142 Coax cable. Dimensions (excluding Clamps) ~ 290 x
95 x 35 mm, ~ 530 grams.
Cat Code: Ant-Y12
(Gold)
(A) $87
/ (B) $109
Yagi ~ 12 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x
95 x 35 mm, ~ 600 grams.
Cat Code: Ant-Y15
(Gold)
(A) $95 /
(B) $119
Yagi ~ 15 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x
95 x 35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x
70 mm Aluminium mounting plate, Clamps, etc. Pictured in
Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y8C
(Gold)
(A) $89
/ (B) $109
Compact Yagi 2.4
~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohms impedance. Beamwidth: E70,
H90.
Dimensions
(excluding Clamps) ~ 190 mm, ~ 75 mm diameter, ~ 500 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y10C
(Gold)
(A) $95
/ (B) $119
COMPACT Yagi 2.4
~ 2.5 GHz, ~ 10 dBi gain, ~ 50 ohms impedance. Beamwidth: E44,
H56.
Dimensions
(excluding Clamps) ~ 280 mm, ~ 75 mm diameter, ~ 500 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector.
|
 |
Cat Code: Ant-Y12C
(Gold)
(A) $103
/ (B) $129
Yagi 2.4 ~ 2.5
GHz, ~ 12 dBi gain, ~ 50 ohms impedance. Beamwidth: E35, H40.
Dimensions
(excluding Clamps) ~ 450 mm, ~ 75 mm diameter, ~ 650 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y16C
(Gold)
(A) $119
/ (B) $149
Yagi 2.4 ~ 2.5
GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28, H28.
Dimensions
(excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-Y17.5C
(Gold)
(A) $143
/ (B) $179
Yagi Antenna 2.4
~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23,
H24.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation * Mast
not included.
SMA male
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-F8N
(Gold)
(A) $63
/ (B) $79
COMPACT Flat
Antenna 2.3 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 60º (H) ~ 70º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & Tubular Mast Clamp. Dimensions (excludes Socket
& Brackets) ~ 95 (W) ~ 110 (H) ~ 30 mm (D), ~ 260 grams.
Pictured in Vertical Polarity orientation.
N female Connector. <Adaptors
& Extension Cables>
|
 |
Cat Code: Ant-F12
(Gold)
(A) $95
/ (B) $119
COMPACT Flat 2.3
~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 28º
(H) ~ 70º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 95 (W) ~ 212 (H) ~ 30 mm (D),
~ 500 grams. (Shipping weight 1010 grams)
Pictured in
Vertical Polarity orientation.
N female
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-F16
(Gold)
(A) $127
/ (B) $159
COMPACT Flat 2.3
~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 27º
(H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm
(D), ~ 740 grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat
Code: Ant-F18 (Gold)
(A) $151
/ (B) $189
COMPACT Flat 2.3 ~ 2.5 GHz, ~
18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H) ~ 75º
(V).
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions (excludes Socket
& Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.
Pictured in Vertical Polarity
orientation.
N female Connector.
<Adaptors & Extension Cables>
|
 |
Cat Code: Ant-P10
(Gold)
(A) $87
/ (B) $109
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 30º (H) ~ 60º (V).
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets)
~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA female
Connector. <Adaptors &
Extension Cables>
|
 |
Cat
Code: Ant-P18G (A)
$95 / (B) $119
Sectional Grid Parabolic, 2.4
~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance Dipole. Beamwidth ~
25º in vertical polarity mode, Front to Back ratio ~ 20 dB.
Fitted with ~ 750 mm RG-8/U Coax cable.
Reflector ~ 390 x ~ 545 mm.
Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting
hardware.
Carriage in an Air Satchel
$13, via Post $35.
Pictured in Vertical Polarity
orientation * Mast not included. Gold Irridite coated
version pictured, we now stock a more durable Galvanised version
only.
N male Connector.
<Adaptors & Extension Cables>
|
ADAPTORS
|
 |
Cat
Code: SMAm-Nf (Net)
$10
SMA male to N female. Suitable for P18G antenna. |
 |
Cat
Code: SMAm-Nm (Net)
$10
SMA male to N male. Suitable
for F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
 |
Cat
Code: SMAm-m (Net)
$10
SMA male to SMA male. Suitable
for P10 antenna.
|
 |
Cat Code: Cable-178/30
(Gold)
(A) $24
/ (B) $30
30 cm RG-178 Coax
cable with SMA male & female connectors.
|
 |
Cat Code: Coax178/SMA
(Net) $10
~ 10 cm RG-178
Coax cable with SMA male connector.
|
 |
Cat Code: Cable-23/450
(Gold)
(A) $63
/ (B) $79
~ 450 cm Coax Cable with
SMA male & female connectors. Attenuation ~ 0.75 dB/metre @ 2
GHz.
Cat Code: Cable-23/450N
(Gold)
(A) $63
/ (B) $79 not pictured
~ 450 cm Coax
Cable with SMA & N male connectors.
Attenuation ~ 0.75 dB/metre @ 2 GHz. Suitable for
F8N, W9dB, F12, W12dB, F16 & F18 antennas.
|
Parabolic Yagi &
Flat are directional antennas. Whip antennas when used vertically are
for most practical purposes omni or non directional.
To maximise 'Range'
minimise the length of Coax Cable between Antenna and TX/RX.
|
|
Antenna Gain... what does
it mean ??? a simplified explanation
Received signal strength
from an antenna with 3 dBi gain will be double that from an antenna that
has 0 dBi gain, received signal strength from a 6 dBi will be double that
from a 3 dBi and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or transmitter
output. Range can be doubled by either increasing antenna gain by 6 dBi or
quadrupling the transmitter output.
The maximum allowed 2.4
GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in
Australia), increasing transmitter output is illegal and therefore not an
option.
Increasing the gain of
the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to
3 dBi is equivalent to raising the output power of a 10 mW transmitter to
~ 20 mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15
dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
* LIPD = Low
Interference Potential Devices. * EIRP = Equivalent Isotropically
Radiated Power. Source: Australian Communications Authority
Click below for information on Frequencies & Power Limits
http://www.aca.gov.au
|
** Information
plagiarised from this page may be found on 'copy-cat' Web Sites **
Use your Browser "Back
Button" to return to previous page
Video Transmitter VIDEO &
AUDIO 2.4 GHz TRANSMITTER & RECEIVER SYSTEM * Wireless AV Link / AV Sender
with Omni Directional Vertical TX Antenna* for: VCRs, Satellite TV, DVD, PCs,
Pay TV, MDS, Cable TV, Remote Control: Cars - Boats - Hovercraft, Portable CCTV
Video Surveillance * Up to ~ 600 metres range with 18 dB antenna * Wireless
Audio & Composite Video for Covert Tiny Hidden Pinhole Spy Video Cameras
& Transmission of CCTV Surveillance Video from/to Cameras, Switchers, Quad
Screen Processors, Multiplexers, Monitors. 2.4 GHz Wireless Transmitter,
wireless, wireless audio transmitter, wireless audio video, wireless av 2.4 ghz
transmitters, wireless av transmitters, wireless cable tv transmitter, wireless
color video camera usb, wireless security cameras, wireless spy camera, wireless
spy cameras, wireless surveillance cameras, wireless transmitter, wireless
transmitters, wireless tv transmitter, wireless video, wireless video camera,
wireless video cameras, wireless video sender, wireless video transmission,
wireless video transmitter, video transmitter, video transmitters, transmitter
wireless video, transmitter wireless video camera, 2.4ghz video transmitter
+ 
+ 
+ 
+