Applications
Suitable for portable discreet / covert Surveillance and a virtually
unlimited number of Monitoring / Recording locations using multiple
Receivers.
Business: Observe showrooms,
warehouse, offices, doors, etc without the need to install expensive
and inflexible wiring, use up to 4 camera/transmitters and any
number of Receivers.
Home: See who is outside your door
- use your TV as a monitor * Monitor your baby, your children, the
swimming pool, the elderly, ill or disabled * Monitor your home with
up to four cameras.
Camera-Transmitter
(TX-CAM2p)
Colour CCTV Video Camera
with Pinhole Lens - PAL TV system.
Image Sensor: 1/4 inch
LOW BLEMISH CCD, 512 x 582 pixels.
Lens: Pinhole Type 5.5 mm Focal Length, there are no Accessory
Lenses for this Camera,
additional information
here.
Sensitivity: ~ 3 lux @ F1.2 (this value is provided for comparative
purposes only).
Signal : Noise Ratio ~ 48 dB.
Resolution: ~ 440 Horizontal Pixels (this value is provided for
comparative purposes only).
Automatic Electronic Shutter: 1/50 ~ 1/100 000 second, 20 ms ~ 10
microseconds, additional information
here.
Video Transmitter ISM
Band: 2.4 ~ 2.483 GHz 4 Channel.
Modulation Method: FM.
Oscillator: P.L.L. (Phase Locked Loop).
RF Output Power: 10 mW EIRP (maximum allowed) with 3 dBi Mini
Antenna, 50 ohms impedance, SMB RF connector.
Power Requirements: 12 VDC Regulated, 2.1 mm x 5.5 mm
socket, center pin = (+),
Current: ~ 160 mA.
Dimensions: ~ 69 mm (L), ~ 32 (W), ~ 28 mm (H), excluding antenna.
Antenna ~ 62 mm long, ~ 6 mm diameter. Total weight ~ 60 grams.
Channel Select
(DIP Switch) info:
here
Compatibility:
Video transmissions may be received with
RX-Mon7 &
RX-Mini.
Receiver (RX-Mini)
Video Output: Standard Composite
Video 1 v p-p, 75 ohm impedance via 2.5 mm mini socket & 1.5 metre
cable with RCA Plug.
Single channel selection or Automatic Sequential Switching with ~ 4
second dwell.
Audio Output: Line Level, via 2.5 mm mini socket & 1.5 metre cable
with RCA Plugs.
Power Supply Requirement: 9 ~ 12 VDC, 1.3 mm x 3.8 mm
DC socket, center pin = (+).
Current: ~ 180 mA @ 10.5 Volts.
Sensitivity: -92 dbm.
Dimensions: ~ 52 mm (W) 60 mm (H) 20 mm (D) excluding sockets &
antenna. ~ 40 grams.
Compatibility:
Receives transmissions from:
TX-Compact,
TX-AV1000,
TX-CAM2p,
TX-Module, TX-MOD
2, TX-MOD 3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500, TX-AV2000,
TX-CAM2 & TX-CAM3.
Connection info:
here
RANGE
Depends on
Surroundings, Obstructions, other Transmitters (2.4 GHz Cordless
Phones, Wireless LAN, etc), Antenna Alignment, Electromagnetic
& Radio Frequency interference in the vicinity. This device may be
affected by and may affect other devices that operate on or near the
same frequency causing minor to severe interference.
In ideal, clear,
Line-of-Sight conditions
Vertical 5 dBi Whip
antenna on Receiver up to ~ 100 metres.

Correctly matched and
aligned 24 dBi antenna on RX up to ~ 1 000 metres.

Due to the nature of Radio
Signals results are unpredictable (in the same manner as Mobile /
Cellular Telephones) signals reflected from surrounding objects
arriving at Receiver antenna may Add-to or Subtract-from the direct
signal from Transmitter. Directional antennas may reduce affect of
reflected signals.
ANTENNAS
for RECEIVER
not suitable for TX-CAM2p
Range and Signal to
Noise Ratio (SNR) may be improved by increasing gain of antenna on
Transmitter &/or Receiver. For maximum signal transfer TX and RX
antennas should be the same polarity, that is both oriented
Vertically or Horizontally.
 |
Cat Code:
Ant-SMB
$10
2.4 ~ 2.5 GHz
Antenna, ~ 3 dBi gain, ~ 50 ohms impedance. Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters,
etc.
Length: ~ 62
mm. Diameter: ~ 6 mm. Weight: ~ 2 grams.
Pictured with discontinued
TX-MOD3, suits
TX-CAM2p,
TX-CAM2,
TX-BNC
SMB
Connector (socket center contact) |
 |
Cat Code:
Ant-Whip $20
< 20+
$10 >
Vertical Whip Antenna Omni
Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 107 mm straight, ~
87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams.
SMA male Connector. |

White or Black Colour
depending on stocks |
Cat Code:
Ant-W5dB
$20
< 20+
$10 >
Vertical Whip Antenna
non-directional 2.4 ~ 2.5 GHz, ~ 5 dBi
gain, ~ 50 ohms impedance.
Antenna for Wireless
LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top.
Weight: ~ 30 grams.
SMA male Connector. |
 |
Cat Code: Ant-W15dB
$169
High Gain Vertical Whip Antenna
2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm impedance. Beamwidth:
Horizontal 360º, Vertical 11º. VSWR (Voltage Standing Wave
Ratio) ~ 1.5. Maximum Power 50 Watts. Antenna for Wireless
LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc.
Length: ~ 1640
mm, ~ 1935 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~
20 mm main center section ~ 22 mm top cap. Weight: ~ 680 grams
~ 950 grams with Mounting Tube & Clamp/Bracket.
data sheet
N female
Connector. <Adaptors &
Extension Cables> |
 |
Cat
Code: Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Discontinued
Cat Code:
Ant-Y15 $79
Yagi
Antenna for Wireless LAN, WiFi
Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5
GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax
cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35 mm, ~ 680
grams.
Supplied with ~
140 x 70 mm Aluminium mounting plate, Clamps, etc. Pictured in
Vertical Polarity orientation * Mast not included.
SMA male
Connector. <Adaptors & Extension
Cables> |

 |
Cat Code:
Ant-Y17.5C
$99
Yagi Antenna
2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~
500 mm RG-58 Coax cable. Supplied with Aluminium mounting
plate, Clamps, etc. Pictured in Vertical Polarity orientation
* Mast not included.
SMA male
Connector. <Adaptors & Extension
Cables> |
 |
Cat Code:
Ant-F16
$79
Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters,
etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm
impedance.
Beamwidth: ~
27º (H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D),
~ 740 grams.
Suitable for
Indoor and sheltered Outdoor use under eaves, etc
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-F18 $99
COMPACT Flat 2.3 ~ 2.5 GHz,
~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H) ~ 75º
(V). Antenna for Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc.
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting & two
Tubular Mast Clamps.
Dimensions (excludes Socket
& Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.
Suitable for Indoor and
sheltered Outdoor use under eaves, etc
Pictured in Vertical
Polarity orientation.
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code: Ant-F20
$109
Compact Flat 2.4 ~ 2.5 GHz, ~
20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30º H90º.
Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied with
50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~ 330 (H) ~ 40 mm
(D). Weight ~ 1.65 kg including mounting bracket. Tilt +/- ~
20º.
Suitable for
Indoor and sheltered Outdoor use under eaves, etc
Pictured in
Vertical Polarity orientation.
data sheet
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-P10
$69
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters,
etc.
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~
275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Suitable for
Indoor and sheltered Outdoor use under eaves, etc
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-P24 $199
Grid-Parabolic
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 11º (H) ~ 7º (V). Front:Back ~ 25dB.
VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with
Clamps to suit 40 ~ 50 mm Tubular Mast, bracket for Vertical
or Horizontal mounting 60º Tilt in 10º increments. Aluminium
Grid (2 sections) ~ 1060 (W) ~ 600 (H) mm assembled. Weight ~
2.8 kg including mounting bracket.
Pictured in
Horizontal Polarity orientation.
data sheet
N female
Connector. <Adaptors & Extension
Cables> |
ADAPTORS
  |
Cat Code: SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut) to N
female. Suitable for P18G & P24G discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas. |
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna. |
 |
Cat Code:
Cable-178/30 $19
30 cm RG-178
Coax cable with SMA male & female connectors. |
 |
Cat Code:
Cable-58/450 $39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~
1.4 dB/metre @ 5.8 GHz
Cat Code:
Cable-23/450N $39
not pictured
~ 450 cm Coax Cable with SMA & N male
connectors. Attenuation ~ 0.75 dB/metre @ 2.4
GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas. |
Parabolic Yagi &
Flat are directional antennas. Whip antennas when used
vertically are for most practical purposes omni or non
directional.
To maximise 'Range' minimise
the length of Coax Cable between Antenna and TX/RX.
|