H.264
Wired/Wireless Video Server with 2-Way Audio * RS485 PTZ Control
* Alarm I/O * Web Cam Server *
SD Memory Back-Up
Convert any Composite Video Camera to a Multi-Function Network
Camera Recorder
|
|
|
 |
Easily/Quickly convert ordinary CCTV Cameras or any
Camera with Composite Video output to an IP Network
Camera with 2-Way Audio Alarm I/O 'periodical
Snapshot' SD Recording & RS485 PTZF control
J
Optional 5 ~ 24 dB High Gain Long-Range 2.4 GHz Antennas
J
RS485 output for Pan Tilt Zoom control
PELCO™-D
protocol compatible software
J
Two Alarm Inputs Two SPDT Relay Alarm Outputs
J
Two-Way Audio ideal for entry communication and access
control (using Alarm Output)
J
Periodical Snapshot Recording to SD Card
J
SMA female RF Antenna
output for easy connection of Coax Cables & High 5 ~ 24
dBi Gain Antennas for increased range
J
Includes
free
36 Channel
Remote Monitoring Recording Software that is compatible
with following product family:
IPw-CSdnProg |
IP-DdnAV |
IP-CSdnAV |
IPw-CSdnAV |
IP-CSHR
|
IP-CSdn |
IP-CSdnHR |
IP-CSdnProg
|
IP-Dome2MP
|
IP-Dome1.3MP
J
free:
SDK &
API for System Integrators & Software Developers
|
|
Network wired or wireless 720
H-Pixel Video Server / Video Recorder with 2-Way Audio.
Easily
relocatable Network Surveillance System just connect to
Power.
WEP 64 /
128-bit, WPA, PSK IEEE 802.11b/g .
RS485 output
for external devices PTZF, etc,
PELCO™-D compatible.
Multi Camera
Surveillance using free 36-channel software.
Real-Time
25/30 IPS Live Monitoring.
IE Browser
Remote View 10 Simultaneous users.
Two-Way
Audio for direct communication / intercom.
Web Cam
using Internet Explorer Browser.
Remote
Monitoring / Playback / Search / Backup.
Dual
streaming H.264 MPEG-4 / JPEG codec with adjustable
quality/compression to cater for fast/slow & narrow/wide
Bandwidth Networks.
Video Motion
Detection 3 Zones & 10 Sensitivity Levels.
Free 36
Channel remote monitoring and recording software.
HTTP, TCP/
IP, UDP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, 3GPP, UPnP.
FTP - e-mail
- Dynamic Domain Name Server (DDNS) capabilities.
SD Flash
Memory Card Slot for 'periodical Snapshot' stand-alone or
backup Recording, Triggers: IP Check, Network disconnected,
Motion detected & Alarm input.
Order Code: [IPw-TX264]
only
$249
(formerley IPw-TX)
ISO9001 Taiwan
Quality
Compare this with other
devices in this IP CCTV Network Family
OPTIONS
[SD-2GB] 2 GigaByte SD Memory Card
$25
[Mike]
Microphone & Preamplifier
$20
[REG12/1A]
Plug Pack Regulated 12 VDC 1 Amp
$20
[REG12-Auto
for 12 V Battery/Vehicle operation
$29
[Rect-Reg+]
Rectifier Regulator for long cable run, 24 vac power, etc
[Cable-LANxo] Short Crossover LAN Cable
$5 (simplify setup)
Use existing Composite Video
Coaxial Cable for Network low cost easy speedy analog-cctv to
Network-CCTV conversion
more...
Combine this with a
Maxi Camera
and build a Customised Network Camera.
RS485 Analyser displays
hexadecimal data from any RS485 controller
|
|
JPEG Image from SD Card
JPEG Image Recorded to PC
* click on image to view full size *
Image Source Digital TV.
to view pages from IPw-TX Wired/Wireless Network AV Server
'User's Manual'
to view pages from free
36 Channel Network Camera Monitoring Recording Software 'User's
Manual'
|
|
|
Network Protocol: HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, 3GPP, UPnP.
Remote Software: Free 36 Channel remote monitoring and recording
software.
A/D Resolution: PAL 720 x 576 (D1) 352 x 288 (CIF) 176 x 144 (QCIF).
Triggered Actions: Mail, FTP, Alarm Output (1 or 2), Save to SD
card.
Backup SD Card 128 MB to 4 GB SanDisk or Transcend Card.
Ethernet LAN / WAN Port 10/100 Base-T , RJ45 connector.
Firmware Upgrade: http mode, can be upgraded remotely.
Web Browser Microsoft Internet Explorer 6.0 or above.
Image Display Rate Full D1 Resolution PAL: 25 FPS.
Compression Format Dual Mode: H.264 MPEG4 / MJPEG.
Security: Password Protection configurable.
Video Bitrate Adjustment: CBR, VBR.
Video Motion Detection (3 Areas).
Pre / Post Alarm: Configurable.
Users: Up to 10 simultaneous.
SDK: available for integration.
Video Format: AVI.
Full Screen Monitoring.
Video Playback.
Image Snapshot.
Audio 2 Way.
When used with
DomePTZ-dn1 |
DomePTZ-dn2 |
DomePTZ-dn3 |
100 Channel RS485 PELCO™-D
compatible Remote Pan / Tilt / Zoom / Focus / Auxiliary
Receiver |
AutoCam-dn Security Camera select
EP Pelco-D 2400 bps.
Made in Taiwan in an ISO 9001
certified factory.
Manufacturer's Experience: 18 +
Years.
Wireless
WEP 64 / 128-bit, WPA, PSK IEEE
802.11b/g .
TX Output Power typically:
with Ant-W5dB Antenna, CCK 14 ~ 16 dBm (~ 30 mW), OFDM 10 ~ 13
dBm (10 ~ 20 mW).
RX Sensitivity typically:
with Ant-W5dB Antenna, 11 Mbps <-84 dBm, 54 Mbps <-70 dBm.
SD card management
Recording Trigger: Motion Detection (3 separate areas), IP
check, Network disconnected & Alarm Input.
Video Playback: Yes.
Compatibility: 128 MB to 4 GB SanDisk or Transcend.
INPUT / OUTPUT
Video Input/Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket.
Audio Input/Output: Line Level
input for
Microphone & Preamplifier, output for Amplified Speaker, RCA
socket.
Alarm: 2 x Inputs, 2 x SPDT
Outputs, Press-to-Release terminals.
NETWORK: Standard RJ45 8p8c
socket.
RS485: Press-to-Release
terminals.
RS232: DB9 socket.
Radio Frequency: Standard SMA
socket, external thread, socket contact.
Power: 12 Volts DC Regulated, ~
350 mA, 2.1 x 5.5 mm DC socket, center pin = (+).
Dimensions: ~ 134 x
42 x 107 mm, ~ 440 grams.
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones,
Wireless LAN, etc), Antenna Alignment, Electromagnetic &
Radio Frequency interference in the vicinity. This device may be
affected by and may affect other devices that operate on or near
the same frequency causing minor to severe interference.
In ideal, clear, Line-of-Sight
conditions with Ant-W5dB Antenna and communicating with a device
of same or higher Output & Sensitivity
up to ~ 100 metres.
Correctly matched and aligned 24
dBi antenna on one device up to ~ 1000 metres.
Correctly matched and aligned 24
dBi antenna on both devices up to ~ 2000 metres.
Due to the nature of Radio
Signals results are unpredictable (in the same manner as Mobile
/ Cellular Telephones) signals reflected from surrounding
objects arriving at Receiver antenna may Add-to or Subtract-from
the direct signal from Transmitter. Directional antennas may
reduce affect of reflected signals.
|
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on either/or
both devices. For maximum signal transfer both antennas should
be the same polarity, that is both oriented Vertically or
Horizontally.
 |
Cat Code:
Ant-SMB
$10
2.4 ~ 2.5
GHz Antenna, ~ 3 dBi gain, ~ 50 ohms impedance. Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~
62 mm. Diameter: ~ 6 mm. Weight: ~ 2 grams.
Pictured with
discontinued
TX-MOD3, suits
TX-CAM2p,
TX-CAM2,
TX-BNC
SMB
Connector (socket center contact) |
 |
Cat Code:
Ant-Whip
$20
< 20+
$10 >
Vertical Whip Antenna Omni
Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50 ohms
impedance. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Length: ~ 107 mm
straight, ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11
grams.
SMA male Connector. |
White or Black
Colour depending on stocks |
Cat Code:
Ant-W5dB
$20
< 20+
$10 >
Vertical Whip Antenna
non-directional 2.4 ~ 2.5 GHz, ~ 5
dBi gain, ~ 50 ohms impedance.
Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @
Top. Weight: ~ 30 grams.
SMA male Connector. |
 |
Cat Code: Ant-W15dB
$169
High Gain Vertical Whip
Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm impedance.
Beamwidth: Horizontal 360º, Vertical 11º. VSWR (Voltage
Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc.
Length: ~
1640 mm, ~ 1935 mm with Base Mount Tube. Diameter: ~ 42 mm
@ Base ~ 20 mm main center section ~ 22 mm top cap.
Weight: ~ 680 grams ~ 950 grams with Mounting Tube &
Clamp/Bracket.
data sheet
N
female Connector. <Adaptors
& Extension Cables> |
 |
Cat
Code: Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Cat Code:
Ant-Y15 $79
Yagi
Antenna for Wireless LAN,
WiFi Network, Wireless ADSL, Video Transmitters, etc. 2.4
~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm
RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95
x 35 mm, ~ 680 grams.
Supplied
with ~ 140 x 70 mm Aluminium mounting plate, Clamps, etc.
Pictured in Vertical Polarity orientation * Mast not
included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-Y17.5C
$99
Yagi
Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms
impedance. Beamwidth: E23, H24. Antenna for Wireless LAN,
WiFi Network, Wireless ADSL, Video Transmitters, etc.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800
grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium
mounting plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-F16
$79
Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi
gain, ~ 50 ohm impedance.
Beamwidth:
~ 27º (H) ~ 60º (V).
Supplied
with versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm
(D), ~ 740 grams.
Suitable
for Indoor and sheltered Outdoor use under eaves, etc
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-F18
$99
COMPACT Flat 2.3 ~ 2.5
GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º
(H) ~ 75º (V). Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions (excludes
Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950
grams.
Suitable for Indoor and
sheltered Outdoor use under eaves, etc
Pictured in Vertical
Polarity orientation.
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code: Ant-F20
$109
Compact Flat 2.4 ~ 2.5 GHz,
~ 20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30º H90º.
Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL,
Video Transmitters, etc.
Supplied
with 50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~ 330
(H) ~ 40 mm (D). Weight ~ 1.65 kg including mounting
bracket. Tilt +/- ~ 20º.
Suitable
for Indoor and sheltered Outdoor use under eaves, etc
Pictured in
Vertical Polarity orientation.
data sheet
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-P10
$69
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied
with Tubular Mast Clamp. Dimensions (excludes Socket &
Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Suitable
for Indoor and sheltered Outdoor use under eaves, etc
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-P24 $199
Grid-Parabolic Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~
24 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11º (H) ~ 7º
(V). Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100
Watts.
Supplied
with Clamps to suit 40 ~ 50 mm Tubular Mast, bracket for
Vertical or Horizontal mounting 60º Tilt in 10º
increments. Aluminium Grid (2 sections) ~ 1060 (W) ~ 600
(H) mm assembled. Weight ~ 2.8 kg including mounting
bracket.
Pictured in
Horizontal Polarity orientation.
data sheet
N
female Connector. <Adaptors &
Extension Cables> |
|
Parabolic Yagi & Flat are
directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise 'Range' minimise the
length of Coax Cable between Antenna and device.
|
  |
Cat Code: SMA-REVm
$10
Conventional SMA (external
thread, socket contact) to Reverse Polarity SMA connector
(internal thread, socket contact, Hex Nut)
Center Socket Contact on
both ends (no Pins), converts
Reverse Polarity SMA to conventional SMA (use with Netcomm
NB9W, etc) |
 |
Cat Code: SMA-REVf
$10
Conventional SMA connector (internal
thread, pin contact, Hex Nut) to Reverse Polarity SMA
connector (external thread, pin contact)
Central Pin Contact on
both ends. |
  |
Cat Code: SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut) to N
female. Suitable for P18G & P24G discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas. |
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna. |
 |
Cat Code:
Cable-178/30 $19
30 cm RG-178
Coax cable with SMA male & female connectors. |
 |
Cat Code:
Cable-58/450 $39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~
1.4 dB/metre @ 5.8 GHz
Cat Code:
Cable-23/450N $39
not pictured
~ 450 cm Coax Cable with SMA & N male
connectors. Attenuation ~ 0.75 dB/metre @ 2.4
GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas. |
Antenna Gain... what does it mean ??? a simplified
explanation
Received
signal strength from an antenna with 3 dBi gain will be double
that from an antenna that has 0 dBi gain, received signal
strength from a 6 dBi will be double that from a 3 dBi and so
on... An increase in antenna gain of 3 dBi is approximately
equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or
transmitter output. Range can be doubled by either increasing
antenna gain by 6 dBi or quadrupling the transmitter output.
Increasing the
gain of the receiver antenna is an alternative to increasing
transmitter output.
In very simple terms: increasing antenna gain from
0 dBi to 3 dBi is equivalent to raising the output power of a 10
mW transmitter to ~ 20 mW, (5 dBi to ~ 33 mW) (12 dBi to ~ 160
mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
|
|
|
|