|
Order Code: [Mike-Cap]
$29
 Bulk-Buy
$19 (50+). $18 (100+). $9 (300+).
[Cable-2m1f]
DC power cable splitter, power Microphone from Video Camera
supply $8
Tiny 'Capsule' Microphone with inbuilt pre-amplifier
Wider pick-up
angle - Larger pick-up area - More Sensitive than most inbuilt
camera microphones * May be located closer to source of sound
or attached to camera bracket, etc. * Use more than one for
large areas.
Signal : Noise
Ratio better than 58 dB.
Frequency
response approximately 30 ~ 15000 Hz.
Output: Line
Level Audio via RCA socket on ~ 500 mm Cable.
Dimensions: 6 ~
8 mm Diameter, ~ 24 mm Long, excludes connecting cable and
plug.
Power
Requirements: 9 ~ 15 Volts DC, 15 ~ 20 mA, via 2.1 mm x
5.5 mm DC socket center pin = (+)
on ~ 500 mm Cable.
For the
technically minded... PCB Socket & Heat-Shrink tubing could be
removed & wires soldered to PCB for more compact (~ 6 mm x ~
24 mm) applications.
Gain could be increased by changing Resistor value(s). Could
be powered from a 5 VDC regulated supply, has an on-board 3
Terminal Voltage Regulator that could be bypassed or removed. |
Order Code:
[Mike]
$20
In-Line Microphone with inbuilt preamplifier
Microphone is In-Line with an interconnecting
Cable to allow easy connection to a Video Camera as
pictured below.
Output: Line
Level Audio via RCA socket.
Dimensions: ~
40 x ~ 15 x ~ 8 mm, excludes connecting cable and
plugs/sockets.
Power
Requirements: 12 Volts DC Regulated, ~ 10 mA, via 2.1 mm
x 5.5 mm DC socket center pin = (+).
RCA Video connectors pictured, supplied with BNC Video
connectors.
CableConnections:
Camera end, 2.1 mm x 5.5 mm DC plug center pin = (+)
and BNC plug for Video.
Other end, 2.1 mm x 5.5 mm DC socket
center pin = (+),
BNC socket for Video & RCA socket for Audio.
Camera end of Cable &
BNC Video Socket can be cut off if not required.
Order Code:
[Mike]
$20
|
