Hardware Paks
Screws/Nuts/Bushing/Spacer

click on image to enlarge
All Dimensions are in mm &
approximate
Cat Code: HW-PAK#1 Threads 1.8, Spacer/Bush 4.4 long, Screws
3.5 long. $10
- 24
piece 8x3 pack
Cat Code: HW-PAK#2 Threads 1.8, Spacer/Bush 6.4 long, Screws
countersunk black 4.7 long chrome 5 long.
$10
-
24 piece 8x3 pack
Cat Code: HW-PAK#3 Threads 1.8, Spacer/Bush 6 long
excludes threaded section, Screw 5 long, Nut 1.5 thick 4
across flats. $20
-
72
piece 24x3 pack |
Cat Code: PCB-Brkt#1 $3

Click Image to enlarge
Metal PCB Module Swivel & Tilt Bracket to suit most 32 x 32
mm Modules, 4 x ~2mm screws, ~28 mm centers.
Cat Code: PCB-Brkt#2 $4

Click Image to enlarge
Metal PCB Module Swivel & Tilt Bracket to suit most 32 x 32
mm & 42 x 42 mm Modules, 4 x ~2 mm screws, ~6.5 mm
standoffs, ~28 mm or ~38 mm centers.
|
|
Light Emitting Diodes
Cat
Code: LED-850/14 5 mm Infra-Red Light Emitting Diode, 200 mW/sr
typically @ 100 mA, Spectrum ~ 850 nm, Angle +/- 7 (14)
degrees, tolerance +/- 30%. Clear Package: Packet of 50
$15,
Packet of 100
$25
Cat Code:
IR-940/20 5 mm Infra-Red Light Emitting Diode, 120 mW/sr
typically @ 100 mA, Spectrum ~ 940 nm, Angle +/- 10 (20)
degrees tolerance +/- 30%. Clear Package. Packet of 50
$15,
Packet of 100
$25
Cat
Code: LED-940/40 5 mm Infra-Red Light Emitting Diode, 90 mW/sr
@ 100 mA, Spectrum ~ 940 nm, Angle +/- 20 (40) degrees,
tolerance +/- 30%. Clear Package: Packet of 50
$15,
Packet of 100
$25
goto
Infra-Red Wavelength Selection notes
Cat
Code: LED-595SM 595 nm YELLOW LED
Surface Mount 2.8 mm x 3.2 mm x 1.9 mm ULTRA-BRIGHT, ~ 250
millicandela, 120 degree angle of radiation. Ideal for Hole
& Cavity Inspection Cameras: Packet of 50
$15
Cat
Code: LED-660 660 nm 5 mm
ULTRA-BRIGHT RED LED ~ 3200 millicandela (3.2 candela) @ 30
mA, + or - 10 (20) degrees, tolerance +/- 30%. Clear
Package: Packet of 50
$10. Packet of 10
$3
FLASHING LEDs
Cat
Code: 5 mm FLASHING LED ~ 2.4 Hz, 660 nm RED, 567 nm GREEN,
585 nm YELLOW or 635 nm ORANGE 3 to 5 VDC. Ideal for DUMMY
CAMERAS. $1, Packet of 20 assorted:
$5
|
|
Cat
Code: Goose-Stand

Desktop Microphone Stand with 30 cm Gooseneck and 3/8" x 16
TPI Adaptor. Ideal for holding a Video Camera or Lamp or
fitted with a Clamp as a Third Hand. Excellent for for
Close-Up Video inspection of PCBs, Jewellery, Clock making,
Video-Photography of Insects, Stamps, etc., etc.
$20
|
Gloves
Cotton for handling PCB Modules, Clear Domes, Components,
Etc Etc: $2 |
|
Modular Plugs & Sockets
Dual
6 pin 6 contact RJ12 Modular Socket ARISTA PT11 with 6 Screw
Terminals. Could be used to connect
CAT-5 LAN Cable -
Baluns - Coaxial Cable for transmission of Video - Audio -
Power. 42 mm (W) 58 mm (L) 24 mm (H), wall mount with
snap-on cover. $3
6 pin
6 contact RJ12 Modular Plug & Socket PCB Mount, 15 × 18 × 18
mm. Could be used to connect
CAT-5 LAN Cable -
Baluns - Coaxial Cable for transmission of Video - Audio -
Power. After soldering these could be secured and insulated
with Heat Shrink Tubing. pair
$1
6 pin
6 contact RJ12 Female - Female Modular Coupler for joining
extension cables with up to 6 contacts, straight through
(1>6, 2>5, 3>4, 4>3, 5>2, 6>1)
$1
|
|
Cat
Code: Plug-AI
$1
* Cat Code: Plug-AI//BP Bulk Pak 50 pieces
$25
to suit all C and CS Mount Cameras with an Auto Iris Lens
Output in this Catalogue.
|
AUTO IRIS AMPLIFIER BOX
Cat Code: AI-BOX $29
Automatic Iris Lens Amplifier allows a DC DRIVE Lens
to be used on Cameras that only have Video Drive AI Lens
output. Common 4 Pin Input Plug & Output Socket, 8 ~ 16 VDC.
'LEVEL' (Image Signal Level) & 'A.L.C.' (Light Metering -
Average/Peak) adjustment Potentiometers. Compact ~ 33 mm x ~
16 mm x ~ 10 mm, ~ 7 grams. |
Board Lens to CS
Mount Adaptor Cat Code: CS-BL
$10
Plastic
type pictured current stocks are Aluminium (aluminium
colour) * CS Mount 1 inch x 32 TPI thread to 12 mm x 0.5 mm
Lens converter, allows most Board and some Pinhole Lenses to
be used on a CS Mount Camera. |
C Mount Spacer Ring Cat
Code: C-SPACER $10
* Cat Code: C-SPACER/BP Bulk Pak 25 pieces
$99
5 mm C Mount Spacer Ring, converts a CS Mount Camera to C
Mount, 1 inch x 32 TPI thread (style / colour may vary
depending on stocks). |
|
FILTERS for: experimental
purposes.
|
|
Infra-Red PASS for:
experimental purposes.
Cat Code:
FIL-IR670 $49
Sheet of Optical Quality Long Pass Material, passes light
greater than ~ 670 nanometres wavelength. Suitable for
concealing Camera Lens or the LEDs in an IR Illuminator (ILLUM-KIT)
or for construction of an Infra-Red Illuminator using an
incandescent lamp. Lightweight plastic, Thermoset ADC
(CR-39), transmission > 90%, 1-2% peak at 500 nanometres
green colour. Maximum operating temperature 100 degrees
centigrade continuous (130 degrees one-hour). Thickness ~
1.5 millimetres ~ 100 mm x ~ 125 mm.
 
Cat Code:
FIL-IR730/10 $10
Infra-Red Pass Film 0.1 mm flexible, passes light greater
than ~ 730 nanometres wavelength. Covers the rear element of
most Board or Pinhole lenses or image area of a 1/3 inch
sensor ~ 10 mm disc.
Cold-Mirror25
$40
Glass ~ 25 mm Square, ~ 3 mm Thick. Reflects Visible
Spectrum (less than ~ 700 nm), Transmits/Passes Near
Infrared Spectrum (greater than ~ 700 nm), to reduce
heat in projection systems, etc etc.
Cold-Mirror
$50
Glass ~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible
Spectrum (less than ~ 700 nm), Transmits/Passes Near
Infrared Spectrum (greater than ~ 700 nm), to reduce
heat in projection systems, for Incandescent Infrared
Illuminators, etc etc.
|
|
Infra-Red CUT for:
experimental purposes.
Cat
Code: FIL-IRCUT/6.8mm
$10
Infra-Red CUT Filter passes light less than ~ 730
nanometres wavelength, Glass ~ 6.8 mm Diameter, ~ 0.1 mm
Thick.
IR/BP310-700
$10 used has surface
marks
Band-Pass Filter
passes between ~ 320 ~ 620 nanometres, can also
be used as a Short Pass filter with Cut-Off @
~ 645 nm. Glass ~ 25 mm Diameter, ~ 3 mm Thick, Blue-Green
Colour, Center Wavelength ~ 470 nm.
IR-CUT25/17
$50 used virtually
unmarked
Infra-Red CUT Filter
passes light less than ~ 700 nanometres wavelength,
Glass multi-layer ~ 25 mm Diameter on one
side and ~ 17 mm Square on other, ~ 10 mm Thick, fitted in ~
35 mm Diameter Rubber Mount.
Cold-Mirror25
$40
Glass ~ 25 mm Square, ~ 3 mm Thick. Reflects Visible
Spectrum (less than ~ 700 nm), Transmits/Passes Near
Infrared Spectrum (greater than ~ 700 nm), to reduce heat in
projection systems, etc etc.
Cold-Mirror
$50
Glass ~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible
Spectrum (less than ~ 700 nm), Transmits/Passes Near
Infrared Spectrum (greater than ~ 700 nm), to reduce heat in
projection systems, for Incandescent Infrared Illuminators,
etc etc.
Gold-Mirror
$40
Concave, First Surface, Gold Coated, Glass ~ 32 mm Diameter,
~ 5 mm Thick, ~ 25 mm Focal Length.
|
|
Colour Temperature
Correction for: experimental purposes.
Cat
Code: FIL-3600/10
$10
Colour Temperature Correction Filter for 3600 degree
Kelvin Fluorescent Lamps, Film ~ 0.1 mm, flexible. Covers
the rear element of most Board or Pinhole lenses or image
area of a 1/3 inch sensor ~ 10 mm disc.
Cat
Code: FIL-4300/10 $10
Colour Temperature Correction Filter for 4300 degree
Kelvin Fluorescent Lamps, Film ~ 0.1 mm, flexible. Covers
the rear element of most Board or Pinhole lenses or image
area of a 1/3 inch sensor ~ 10 mm disc.
|
|
Polarised for: experimental
purposes. Extinction (crossed) ~ 0.4% - 0.5%.
Cat
Code: FIL-POL/10 $10
Covers the rear element of most Board or Pinhole lenses or
image area of a 1/3 inch sensor ~ 10 mm flexible disc, ~
0.25 mm thick, Grey tint, Transmission ~ 25%.
Cat
Code: FIL-POL/063 $30
63 mm diameter, flexible disc, ~ 0.65 mm thick,
Grey or Brown tint depending on stocks, Transmission: ~ 22%
Brown, ~ 25% Grey.
Cat
Code: FIL-POL/? x ? cm
'$5.00 Cutting Charge' plus
$0.20 per cm² ,
minimum buy 25 cm² ($10) Specify dimensions when ordering
Flexible Polarising Material Cut-to-Size (rough cut) to
cover the front element of a lens, for window of an outdoor
housing, etc., ~ 0.74 mm thick, Brown tint, Transmission ~
22%, Polarising Efficiency 99+%, UV
Absorption 99+%

|
Colour Transparent Film
for: experimental purposes.
Cat Code: FIL-BK
$35
BOOK of 100, 82 mm x 38 mm sheets most with a Spectral
Transmission Graph. Coloured layer is sealed between two
microscopically thin layers of clear film using
tri-extrusion technology. Ideal for inspection and other
applications, often unseen details will be revealed
depending on light source, filter colour, etc.
|
|
PCB Lens Holders Surplus
clearance items for experimental purposes
NO DIMENSIONAL OR OTHER INFORMATION AVAILABLE
It may or may not be possible to adapt these to suit
products in this catalogue. Holders may sometimes be
attached directly to the IMAGE SENSOR IC with neutral cure
silicone or other adhesive.
Cat
Code: PIN-12DPL $6
each (10 for $50)
Plastic PCB Lens Holder 12 mm x 0.5 mm thread for Pinhole
Lens.
Cat
Code: PIN-10HPL $8
Plastic PCB Lens Holder 10 mm x 0.5 mm thread for Pinhole
Lens.
Cat
Code: PIN-13HPL $6
Plastic PCB Lens Holder 13 mm x 1 mm thread for Pinhole
Lens.
Cat
Code: PIN-10DAL $6
Aluminium PCB Lens Holder 10 mm x 0.5 mm thread for Pinhole
Lens.
Cat
Code: PIN-13DAL $6
Aluminium PCB Lens Holder 13 mm x 1 mm thread for Pinhole
Lens.
|
|
Cat
Code: SURGE-BNC
DISCONTINUED
Surge
/ Lightning Protection Device with 2 Stage Clamping. BNC
male to BNC female connectors & Earthing Wire. Ideal for
CCTV Cameras & Equipment:
$20

Applications include: CCTV Video Surveillance Equipment,
Antenna lead-in Cables for: CATV, Terrestrial Television,
Terrestrial Digital TV Set-Top-Box receivers, VCRs, PC Tuner
Cards, Wireless PC LAN Cards, Video Transmitters, Video
Receivers, etc., etc. For maximum protection Earth Wire
should be securely connected to an effective 'EARTH', a
mains power distribution system Earth may only provide
limited protection due to wiring resistance. 'Earth' on this
Device is not the same as the earth/negative/ground
associated with electronics equipment, CCTV wiring, etc.
Attack Time < 100 ns (90V), > 100 ns (12V). Max Surge
Current 5000 Amps. Surge Life 300 x 100 Amp cycles.
Insertion Loss ~ 0.2 dB. Return Loss (75 ohms) ~ 16
dB. Power Passing capability 90 VDC, 65 vac RMS. Weight ~ 80
gms.

|
Cat
Code: Top-FP $40
Topfield TF7100HD PLUS Front Panel
complete with Display & IR Receiver PCB, Push Button
Switches, USB Port PCB, etc,. New never used.

|
|