INFRA RED SENSITIVE Colour 700 H-Pixel High Resolution PCB Module CCTV Camera with 3.6 mm Lens SONY CCD Image Sensor AWB AES AGC BLC

Colour IR Sensitive 700 H-Pixel High Resolution Covert CCTV Camera Module with 3.6 mm Lens ⅓" SONY CCD Image Sensor AWB AES AGC BLC
 


Charge Coupled Device better than CMOS

Pictured right way up * Small 32 mm x 32 mm PCB, Board Lens for High-Image-Quality & better Low-Light sensitivity, High 700 H-Pixel Covert PCB Camera Module Left side of Camera from "Camera's viewpoint" * Available to suit are are a wide selection of lenses that allow the width-of-vision to be tailored for various situations
Pictured right way up * ⅓ inch 437 664 pixel SONY CCD Image Sensor for excellent sensitivity, high image resolution and high signal-to-noise ratio. Digital Signal Processing, Automatic White Balance, Automatic Electronic Shutter, Automatic Gain Control and Back Light Compensation ensure best possible image quality and exposure in lower to average illumination levels
Click on image for large view

 
High Resolution IR-Sensitive PCB Module CCTV Camera
⅓" SONY 437 664 pixel Super-HAD CCD Sensor
Wide Range of Lenses 2.1 mm to 25 mm
48 + dB Signal : Noise Ratio
700 H-Pixels
0.5 Lux

 
Small 32 mm x 32 mm PCB, Board Lens for High-Image-Quality & better Low-Light sensitivity, High 700 H-Pixel IR Sensitive Covert PCB Camera Module.

This PCB Module is suitable for High Resolution applications for evenly lit and lower levels & in Homes, Shops, Showrooms, Offices, Warehouses, etc.

See-in-the-Dark with an IR Illuminator.

Available to suit are a wide selection of lenses that allow the width-of-vision to be tailored for various situations.

1.78 mm FishEye lens for 8 metre ultra-wide shot @ 3 metres.

A Wide Angle 2.1 mm lens to capture a 6.8 metre wide scene @ 3 metres.

25 mm lens for Full-Screen 'Cash Drawer' or 'Head & Shoulders' images @ 5 metres.

This CCTV Security Camera has a ⅓ inch 437 664 pixel SONY CCD Image Sensor. Digital Signal Processing, Automatic Electronic Shutter, Automatic Gain Control and Back Light Compensation for good exposure in average to zero (with IR Illuminator) illumination levels.

DIY Plug-In installation when purchased with Cable-VP DIY Plug-In 20 metre Video & Power Cable & REG12/0.3A Plug Pack.

Order Code: [Mod-dnHR] only $89
Taiwan Quality

OPTIONS
[REG12/0.3A] Regulated 12 VDC Plug Pack to suit $12
[Cable-VP] DIY Plug-In 20 metre Video & Power Cable $30
 Microphone better than inbuilt microphones $20

Mounting Hardware Screw/Nut/Spacer/Bush Paks

Invisible (no Red glow) Infrared Illuminator for serious Covert See-in-the-Dark surveillance (IR-ILLUM $99)

 
All values are approximate. @ 3 metres @ 5 metres @ 9 metres @ 15 metres
Width of Vision with 1.78 mm FishEye Lens 8 metres 13.3 metres 24 metres 40 metres
Width of Vision with 2.1mm Lens 6.8 metres 11.4 metres 20.5 metres 34 metres
Width of Vision with 2.9 mm Lens 5 metres 8.3 metres 14.9 metres 24.8 metres
Width of Vision with 3.6 mm Lens fitted to Camera 4 metres 6.6 metres 12 metres 20 metres
Width of Vision with 5.7 mm Lens 2.5 metres 4.2 metres 7.6 metres 12.6 metres
Width of Vision with 8 mm Lens 1.8 metres 3 metres 5.4 metres 9 metres
Width of Vision with 12 mm Lens 1.2 metres 2 metres 3.6 metres 6 metres
Width of Vision with 25 mm Lens 0.6 metres 0.9 metres 1.7 metres 2.9 metres
Additional Lens selection info here        

 
Video System: PAL fully compatible with Australian TV System.

Image Device: 752 (H) x 582 (V) 437 664 Pixel 1/3" Sony CCD image Sensor.

Image Device: 752 (H) x 582 (V) 437 664 Pixel LOW BLEMISH 1/3" Sony CCD image Sensor.

Lens: Board Type 3.6 mm Focal Length, accessory Lenses: 1.78 FishEye 2.1, 2.9, 5.7, 8, 12 & 25 mm (BL) types on this page, corners of image may be slightly cropped with 2.1 mm Lens, additional information here.

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, ~ 20 cm cable.

Horizontal Pixels: 700 better than Super-VHS near DVD resolution (this value is provided for comparative purposes only).

Sensitivity: ~ 0.5 lux @ F1.2 (this value is provided for comparative purposes only).

Automatic Electronic Shutter (AES): 1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds, additional information here.

Signal to Noise ratio: 48 + dB, measured with AGC Off.

Automatic Gain Control (AGC): Yes.

Back Light Compensation (BLC): Automatic.

Spectral Response: ~ 400 to ~ 1000 nm with an Infrared 'CUT' Notch between approximately 720 ~ 830 nm. For best colour rendition use light sources with a low or zero infrared component, these include conventional Fluorescent, Light Emitting Diodes, Compact Fluorescent. Colour Day / Night Infrared Infrared Night Vision information 'Primer' here.

Power Requirements: 12 Volts DC Regulated, ~ 80 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+),  ~ 20 cm cable.

Dimensions (mm): ~  32 x 32 ~ 28 deep with 3.6 mm Lens, ~  10 grams.

Mounting: ~ 28 mm centers, ~ 2 mm diameter holes. Mounting Hardware Screw/Nut/Spacer/Bush Paks

 

Tiny Microphone Preamplifier connect to VCR TV Tape Recorder Audio Monitor * Better than most inbuilt Camera microphones Wider pick up angle Larger pick up area Use more than one for large areas For general audio monitoring Spy Bug microphone Microphone Wider pick-up angle Larger pick-up area More Sensitive than most inbuilt camera microphones position closer to source attach to camera bracket Use more than one for large area
Need Sound ? click here

 
Day Night Colour Infrared Light Emitting Diode (Night Vision) Cameras

Colour CCTV Day Night Cameras with inbuilt Infrared Light Emitting Diodes "See-in-the-Dark" and produce images when visible illumination is zero.

At average levels of illumination these Cameras produce Colour images, depending on their sensitivity (Lux) at low illumination levels and in total darkness the image is Monochrome.

These Cameras generally have a relatively high sensitivity image sensor and Fixed Iris Lens therefore under high illumination levels images will be overexposed for the reasons outlined here.

Ordinary CCTV Colour Cameras are relatively insensitive to Infrared because they have an IR CUT Filter between the Lens and Image Sensor, this filter excludes Infrared radiation with a wavelength greater than ~ 700 nm that would otherwise adversely affect White Balance, Colour Rendition and Image Sharpness.

Day / Night Colour CCTV Cameras are sensitive to Infrared because they either do not have an IR CUT Filter or utilise a special NOTCH IR CUT Filter that excludes the wavelengths most harmful to colour quality (720 ~ 830 nm) from reaching the Image Sensor.

A Colour Camera that does not have an IR CUT Filter usually has poor colour rendition characterised by a Pink-Red 'tint' when the illumination is InfraRed rich, use of a 'Notch' Filter helps however White Balance, Colour Rendition and Image Sharpness are compromised for Infrared sensitivity. (Image Sharpness can be restored by using a specially designed Lens that corrects for focus shift between Visible and Infrared)

The IDEAL Day / Night Infrared Sensitive Colour CCTV Camera utilises a Lens with an Automatic Iris to cope with high illumination levels - has a large aperture (low 'F' number) to maximise light transmission and is corrected for Infrared:Visible focus-shift, it also utilises a Traditional IR CUT Filter when illumination levels are adequate for Colour and REMOVES the IR CUT Filter when levels are low our Maxi Cameras have these features and are recommended for OPTIMUM results

BETTER SOLUTION: AutoCam-dn - DomePTZ-dn2 - DomePTZ-dn3 have Automatic-Focus to ensure crisp images regardless of illumination source.

Infrared rich light sources include Daylight and most Filament type lamps including common Spot lamps, Tungsten lamps, Halogen lamps, etc.

The majority of Light emitted from 'Cold' type sources such as Fluorescent, Mercury Vapour, Sodium Vapour, etc., is visible, these sources contain little Infrared energy.

"See-in-the-Dark" Infrared capability using a notch (or no) IR-CUT Filter is a trade-off that adversely affects Colour rendition in "Infrared Rich" environments. 

See in the Dark Infrared Night Vision Day Night CCTV Camera Filter characteristics