PAN & TILT:
Pan Range: 360º.
Pan Speed: 0.5º ~ 240º per
second.
Tilt Range: 0º ~ 100º.
Tilt Speed: 0.5º ~ 120º per
second.
Preset Positions: 128
maximum.
Auto Cruising: 1 maximum.
RS485: 2-wire RS485,
via ~ 50 cm wires.
RS485:
Protocols COP-02, PELCO™-P
(9600bps), PELCO™-P
(4800bps), PELCO™-D
(2400bps).
When used with
Wireless Video Two-Way Audio RS485 Alarm I/O Web Cam Server
Video Recorder select EP
Pelco-D 2400 bps.
CAMERA:
Video System:
PAL Colour fully compatible with Australian TV System.
Image
Device: 752 (H) x 582 (V) 437 664 Pixel 1/4" inch SONY
Super HAD MicroLens Interline Transfer CCD Sensor.

click on image
to enlarge
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket on ~ 20 cm Cable.
Lens: Motorised
Focus/Zoom/Iris, 10X Optical ZOOM, focal length 3.78 mm ~ 37.8
mm, Automatic Iris, Automatic / Manual Focus.
Horizontal Pixels: 750 +
(this value is provided for comparative purposes only) Better
than Super-VHS resolution.
Sensitivity: ~ 0.1 lux @
F1.6 50 IRE in Night Mode (without IR CUT filter), AGC On,
this value is provided for comparative purposes only.
Movable Infrared Optical
Filter:
more
In Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between
Lens and Image Sensor to exclude Infrared radiation that would
otherwise adversely affect colour reproduction, this ensures
colour rendition not possible with
ordinary non-filtered or notch-filter type Day/Night cameras.
In Night mode (low light,
monochrome)
mechanism automatically removes IR-CUT
optical filter to allow Infrared radiation to pass boosting
low light and Infrared sensitivity, the result is
significantly better night images using an
Infrared Illuminator or with
Infrared rich light sources.
Infrared Response
without Infrared filter is ~ 700 to ~
1100 nm better than a
'CCTV
notch IR Filter',
additional
CCTV Infrared Night Vision information.
Automatic Electronic Shutter
(AES): 1/50 to 1/100 000 second or Fixed 1/100, 1/120, 1/250,
1/500, 1/1000, 1/2000, 1/4000 or 1/10000 additional
information
here.
Automatic Gain Control
(AGC): 24 dB maximum.
Signal to Noise ratio: ~ 48
dB, measured with AGC off.
Back-Light Compensation
(BLC): On/Off, 48 zones.
White Balance: ATW / AWB /
FIX
Automatic Level Control (ALC): Auto / Fix.
Other: Title, Horizontal/Vertical Reverse,
Mask, Cross Line, Positive/Negative, etc.
General:
Supplied with Wall Bracket.
Power Requirements: 12 Volts
DC Regulated ~ 500 mA (~ 800 mA Peak when Zoom/Focus/IR-CUT
motor operates) via
2.1 x 5.5 mm DC socket, center
pin = (+),
~ 20 cm cable.
Manufacturer's Experience:
15 + Years, ISO 9001 Certified.
MORE:
to
view pages from
User's Manual.
 |