Suitable for most situations, excels in difficult Back-Lit & High-Contrast situations.

PCB Camera Module is fitted with an IR Focus-Shift Corrected 3.6 mm Focal Length Board Lens.

Also available are a wide range of uncorrected Lenses from 1.78 mm FishEye for 8 metre ultra-wide shot @ 3 metres to 25 mm Telephoto for Full-Screen 'Cash Drawer' or 'Head & Shoulders' images @ 5 metres.

Suitable for Covert or Custom applications in Offices, Warehouses, Homes, Factories, Showrooms, etc.

Order Code: [Pixim-PCB] only $129

Accessories
[REG12/0.3A] Security Camera Plug Pack $12
[Cable-2155Skt & Screw Terminal Block] $3
[Cable-VP] Plug-In (when used with above) 20 m Cable $30
[OSD-Cable] 5-way Joystick to access On-Screen-Setup $20
Covert tiny Microphone $29

Invisible (no Red glow) Infrared Illuminator for serious Covert See-in-the-Dark surveillance (IR-ILLUM $99)

 
New Seawolf Digital Pixel System (Pixim) Image Sensor Chipset this Security Camera PCB Module solves many of the shortcomings of conventional CCD and CMOS sensors and is ideal for most common and many difficult Security Surveillance applications.

Specifically for hidden/discreet surveillance, difficult Back-Lit situations &/or integration/concealment into other devices such as Speakers, Clocks, TV, VCR, DVR, DVD, Toys (nanny cam), Smoke/PIR Detector, etc etc.

Suitable for surveillance in commercial & domestic situations, this PCB Security Camera Module can be easily added to an existing Security system (or replace an under performing CCD Camera), simply connect Video Output from Camera to an unused Security DVR Video input.

Also available is an optional 5-way Joystick control to access an On-Screen setup for customisation of Camera characteristics & parameters to suit unique circumstances.

This PCB Camera Module utilises Pixim's 'Seawolf Solution', it has an extraordinary 690 HTVL effective resolution, far better than conventional Security Cameras, HTVL Effective Specification.

Image Device: Progressive-Scan Seawolf Solution (768x548 Pixels) 758(H) 540(V) 409 320 Active Pixels ⅓" format 7 µm x 7 µm pixel size, CMY Colour Array PIXIM® Wide Dynamic Digital Pixel System®

Lens: Board Type 3.6 mm Focal Length IR Focus-Shift Corrected, following uncorrected Lenses are also available: 1.78 FishEye 2.1, 2.9, 5.7, 8, 12 & 25 mm (BL) types on this page, corners of image may be slightly cropped with 2.1 mm Lens, security camera lens information.

Video System: 2:1 Interlace switchable between PAL 50/625 or NTSC 60/525. PAL 50 Hz vertical, 15 625 Hz horizontal. Compatible with TV Systems in Australia, NZ, UK, USA, Japan, etc.

Video Output: Composite Video 75 ohms 1.14 V p-p via ~ 100 mm stripped & tinned wires, suitable for TV, DVR, VCR, AV & Video inputs in Australia, NZ, UK, USA, Japan, etc.

Sensor/DSP HTVL-effective Resolution: 690 HTVL-E better than Super-VHS near SDTV/DVD resolution. Pixim Whitepapers: HTVL Effective Specification & Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems

Horizontal Resolution: 540 HTVL, this value is provided for comparative purposes only.

Vertical Resolution: 460 VTVL, this value is provided for comparative purposes only, significantly better than conventional interlaced CCD sensors.

Sensitivity: ~ 0.1 Lux @ F1.2, 50 IRE, 25 fps, CMY (this value is provided for comparative purposes only) Camera produces images in total darkness with an IR Illuminator.

Automatic Electronic Shutter (AES): 1/25 to 1/30 720 second.

Dynamic Range (more): 102 dB typically, 120 dB maximum, Dynamic Range is illustrated on this page.

Smear (more): Zero for most practical purposes, copes with highlights better than ordinary CCD cameras, Smear is illustrated on this page.

Spectral Response: ~ 400 to ~ 1000 nm with an Infrared 'CUT' Notch between approximately 720 ~ 830 nm, additional information here. For best colour rendition use light sources with a low or zero infrared component, these include conventional Fluorescent, Light Emitting Diodes, Compact Fluorescent.

Signal to Noise ratio (SNR): up to 50 dB, measured with AGC off.

Back Light Compensation (BLC): Automatic, On/Off.

Noise Reduction: 3D, Motion Adaptive.

Flicker Reduction: 'Pixim' Enhanced Flicker Reduction.

White Balance (WB): Automatic Tracking 2200ºK ~ 10000ºK.

Gamma: 0.45.

Power Requirements: 12 Volts DC Regulated, ~ 150 milliamps via ~ 100 mm stripped & tinned wires.

On-Screen-Display Setup: OPTION Allows parameters to be changed for unique or unusual applications, ~ 70 cm Cable with moulded Joystick, BNC socket & ~ 100 mm stripped & tinned Power wires Red = (+). This Cable is plugged into rear of PCB to access On-Screen-Setup menu to change parameters, if desired it can then be removed to minimise size, parameters are set via Up/Down/Left/Right/Enter push button. Setup Menu information

EXPERT USER ? Comprehensive I/O & Camera Development Kit information may be available to repeat & quantity buyers (this is conditional & at our discretion), send requests by e-mail together with copies of Purchase Receipts. "Seawolf Development Board Brief"

Dimensions (mm): ~ 38 x 38 PCB.

Mass: ~ 20 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.