Applications:
Business
Observe showrooms, warehouse, offices, entrances, etc without the
need to install expensive and inflexible wiring.
Distribute images to multiple remote Monitors (&/or Recorder) for
training, presentation or general surveillance and observation.
View images from Satellite TV, Pay TV, Cable TV, DVDs, VCRs,
Computers, Cameras, Quads, Multiplexers, etc in multiple rooms from
one source without distribution amplifiers or wiring.
Transmit your message to multiple TVs / Monitors in showrooms,
tradeshows, etc without wires.
Safety
See who is outside your door before opening it using a Video Camera
and your regular TV.
Monitor your baby, your children, the swimming pool, the elderly,
ill or recuperating using a CCTV camera or camcorder.

Features:
ISM Band:
2.4 ~ 2.483 GHz 4 Channels Audio & Video.
TV System: Suits all TV Systems in all Countries, operation is
independent of TV System.
Built-in PLL circuit.
Modulation Method: FM.
Oscillator: P.L.L. (Phase Locked Loop).
Audio & Video Input/Output
for:
DVD Player, Satellite TV,
Reversing Video Camera, Tuner, Camcorder, Surveillance Video Camera,
PC DVD / MPEG / AVI Playback, TV Set (AV), Switcher, Video Monitor,
PC Audio/Video Capture Card, VCR, DVR, etc.
Transmitter: (TX-Mini)
Video
Input: Standard 1 v p-p, 75 ohm Composite Video via 2.5 mm mini
socket & 1.5 metre cable with RCA Plug.
Audio Input: Maximum 2 v p-p, via 2.5 mm mini socket & 1.5 metre
cable with RCA Plugs.
RF Output Power: 10 mW EIRP (maximum allowed) with 3 dBi Whip
antenna, 50 ohms impedance, SMA Female Socket.
Power Supply Requirements: 9 ~ 12 VDC, 1.3 mm x 3.8 mm
socket, center pin = (+).
Current: ~ 180 mA @ 10.5 Volts.
Dimensions: ~ 52 mm (W) 60 mm (H) 20 mm (D) excluding sockets &
antenna ~ 40 grams.
Compatibility: Video & Stereo Audio transmissions may be
received with
RX-Mon7 &
RX-Mini.
Receiver: (RX-Mini)
Video
Output: Standard Composite Video 1 v p-p, 75 ohm impedance via 2.5
mm mini socket & 1.5 metre cable with RCA Plug, compatible with CCIR,
PAL, EIA, NTSC, SECAM TV Systems.
Single channel selection or Automatic Sequential Switching with ~ 4
second dwell.
Audio Output: Line Level, via 2.5 mm mini socket & 1.5 metre cable
with RCA Plugs.
Power Supply Requirement: 9 ~ 12 VDC, 1.3 mm x 3.8 mm DC
socket, center pin = (+).
Current: ~ 180 mA @ 10.5 Volts.
Sensitivity: -92 dbm.
Dimensions: ~ 52 mm (W) 60 mm (H) 20 mm (D) excluding sockets &
antenna. ~ 40 grams.
Compatibility: Receives transmissions from:
TX-Mini, TX-Box, TX/RX AV System II, TX/RX-AV3, TX-MOD 2, TX-MOD
3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500,
TX-AV1000, TX-AV2000, TX-CAM2,
TX-CAM2p & TX-CAM3.
Connection info:
here

Need Sound ? click
here
RANGE
Depends on
Surroundings, Obstructions, other Transmitters (2.4 GHz Cordless
Phones, Wireless LAN, etc), Antenna Alignment, Electromagnetic
& Radio Frequency interference in the vicinity. This device may be
affected by and may affect other devices that operate on or near the
same frequency causing minor to severe interference.
In
ideal, clear, Line-of-Sight conditions
Vertical 5
dBi Whip antenna on Receiver up to ~ 100 metres.

Correctly
matched and aligned 24 dBi antenna on RX and 3 dBi antenna on TX up
to ~ 1 000 metres.

Correctly
matched and aligned 24 dBi antenna on TX & RX up to ~ 2 000 metres
Higher than 3 dB on TX not allowed in
Australia.

Due to the nature of Radio Signals results are unpredictable (in the
same manner as Mobile / Cellular Telephones) signals reflected from
surrounding objects arriving at Receiver antenna may Add-to or
Subtract-from the direct signal from Transmitter. Directional
antennas may reduce affect of reflected signals.
ANTENNAS
Range and
Signal to Noise Ratio (SNR) may be improved by increasing gain of
antenna on Transmitter &/or Receiver. For maximum signal transfer TX
and RX antennas should be the same polarity, that is both oriented
Vertically or Horizontally.

|
Ant-Stub $15
2.4 ~
2.5 GHz Whip Antenna, 0 ~ 3 dBi gain, ~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 52 mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male Connector.
|

|
Ant-Whip $20
Vertical Whip Antenna Omni Directional 2.4 ~ 2.5 GHz, ~ 3 dBi
gain, ~ 50 ohms impedance. Antenna for Wireless LAN, WiFi
Network, Wireless ADSL, Video Transmitters, etc.
Length: ~ 107 mm straight, ~ 87 mm folded. Diameter: ~ 9 mm.
Weight: ~ 11 grams.
SMA male Connector.
|

|
Ant-W5dB $20
White or Black Colour
Vertical Whip Antenna non-directional 2.4 ~ 2.5 GHz,
~ 5 dBi gain, ~ 50 ohms
impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 195 mm
straight, ~ 170 mm folded.
Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight: ~ 30 grams.
SMA male Connector.
|

|
Ant-W12dB $129
High
Gain Vertical Whip Antenna 2.4 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50
ohms impedance. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Length: ~ 1210 mm, ~ 1425 mm with Base Mount Tube. Diameter: ~
42 mm @ Base ~ 22 mm main center section ~ 24 mm top cap.
Weight: ~ 670 grams ~ 930 grams with Mounting Tube &
Clamp/Bracket.
Supplied with Base Mount Tube and Clamps/Brackets for surface
or Tubular Mast mounting.
N
female Connector. <Adaptors &
Extension Cables>
|

|
Ant-W15dB $169
High
Gain Vertical Whip Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50
ohm impedance. Beamwidth: Horizontal 360º, Vertical 11º. VSWR
(Voltage Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 1640 mm, ~ 1935 mm with Base Mount Tube. Diameter: ~
42 mm @ Base ~ 20 mm main center section ~ 22 mm top cap.
Weight: ~ 680 grams ~ 950 grams with Mounting Tube &
Clamp/Bracket.
data sheet
N
female Connector. <Adaptors &
Extension Cables>
|

|
Ant-Y8 $69
Ant-Y12 $89
Ant-Y15 $99
Yagi
Antenna for Wireless LAN, WiFi
Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5
GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax
cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35 mm, ~ 680
grams.
Supplied with ~ 140 x 70 mm Aluminium mounting plate, Clamps,
etc. Pictured in Vertical Polarity orientation * Mast not
included.
SMA male Connector. <Adaptors &
Extension Cables>
|


|
Ant-Y17.5C $129
Yagi
Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~
800 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium
mounting plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA male Connector. <Adaptors &
Extension Cables>
|

|
Ant-F16 $79
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi gain,
~ 50 ohm impedance.
Beamwidth: ~ 27º (H) ~ 60º (V).
Supplied with versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast Clamps.
Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~
30 mm (D), ~ 740 grams.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation
N
female Connector. <Adaptors &
Extension Cables>
|

|
Ant-F18 $149
COMPACT Flat 2.3 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~ 45º (H) ~ 75º (V). Antenna for Wireless LAN, WiFi
Network, Wireless ADSL, Video Transmitters, etc.
Supplied with versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast Clamps.
Dimensions (excludes Socket & Brackets) ~ 262 (W) ~ 262 (H) ~
38 mm (D), ~ 950 grams.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation.
N
female Connector. <Adaptors &
Extension Cables>
|

|
Ant-F20 $179
Compact Flat 2.4 ~ 2.5 GHz, ~ 20 dBi gain, ~ 50 ohm impedance.
Beamwidth: E30º H90º. Front:Back > 25dB. VSWR ~ 1.6. Maximum
Power 200 Watts. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with 50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~
330 (H) ~ 40 mm (D). Weight ~ 1.65 kg including mounting
bracket. Tilt +/- ~ 20º.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation.
data sheet
N
female Connector. <Adaptors &
Extension Cables>
|

|
Ant-P10 $79
COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~
50 ohm impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters,
etc.
Supplied with Tubular Mast Clamp. Dimensions (excludes Socket
& Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation.
SMA female Connector. <Adaptors &
Extension Cables>
|

|
Ant-P24 $199
Grid-Parabolic Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24
dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11º (H) ~ 7º (V).
Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with Clamps to suit 40 ~ 50 mm Tubular Mast, bracket
for Vertical or Horizontal mounting 60º Tilt in 10º
increments. Aluminium Grid (2 sections) ~ 1060 (W) ~ 600 (H)
mm assembled. Weight ~ 2.8 kg including mounting bracket.
Pictured in Horizontal Polarity orientation.
data sheet
N
female Connector. <Adaptors &
Extension Cables>
|
ADAPTORS
 
|
SMAm-Nf $10
SMA male (internal thread, pin contact, Hex Nut) to N female.
Suitable for P18G & P24G discontinued antennas.
|
 
|
SMAm-Nm
$10
SMA
male (internal thread, pin contact, Hex Nut) to N male.
Suitable for W12dB, W15dB, F16, F18, F20 & P24 antennas.
|

|
SMAm-m
$10
SMA
male (internal thread, pin contact, Hex Nut) to SMA
male. Suitable for P10 antenna.
|

|
Cable-178/30 $19
30 cm
RG-178 Coax cable with SMA male & female connectors.
|

|
Cable-58/450 $39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~ 1.4
dB/metre @ 5.8 GHz
Cable-23/450N $39
not pictured
~ 450 cm Coax Cable with SMA & N male connectors.
Attenuation ~ 0.75 dB/metre @ 2.4 GHz, ~ 0.8~1.4
dB/metre @ 5.8 GHz. Suitable for W12dB, W15dB, F16,
F18, F20 & P24 antennas.
|
Parabolic Yagi & Flat are directional
antennas. Whip antennas when used
vertically are for most practical purposes omni or non
directional.
To maximise 'Range' minimise the length of Coax Cable between
Antenna and TX/RX.
|