AV Sender Receiver 2.4 GHz Automatic Sequential switching

AV Sender Receiver 2.4 GHz Automatic Sequential switching

RX-COMPACT AV Sender Receiver 2.4 GHz Automatic Sequential switching2.4 GHz 4 Channel Video & Audio Receiver * Manual Selection * Automatic Sequential Switching.

Cable-RCA2 AV Cable $6

PP12/0.5A 12 VDC 0.5 Amp Plug Pack $12

Applications:

Business
Observe showrooms, warehouse, offices, doors, etc without the need to install expensive and inflexible wiring
Receive images to multiple remote Monitors (VCR) for training, presentation or general surveillance and observation
View images from Satellite TV, Pay TV, Cable TV, DVDs, VCRs, Computers, Cameras, Quads, Multiplexers, etc in multiple rooms from one source without distribution amplifiers or wiring.
Distribute your message/commercial to multiple TVs / Monitors in showrooms, tradeshows, etc without wires.

Entertainment
View & Listen all over the house and even out on the patio or pool area from a central source.
Enjoy Satellite TV, rented tapes and DVDs in every room of the house without expensive wiring

Safety
See who is outside your door using a Video Camera, Transmitter and your regular TV.
Monitor your baby, your children, the swimming pool, the elderly, ill or recuperating using your Camcorder or a CCTV Video Camera & Transmitter.
Observe your home or office using up to four transmitters and cameras (in Australia maximum is two transmitters).

Features:

TV System: Suits ALL TV Systems in ALL Countries, operation is independent of TV System.
Four Channel Receiver, single channel selection or Automatic Sequential Switching with ~ 4 second dwell.
Built-in P.L.L. circuit

Specifications:

ISM Band: 2.4 ~ 2.483 GHz, 4 channels
Antenna Input: SMA Female Socket, 50 ohms impedance
Demodulation Method: FM
Oscillator: P.L.L. (Phase Locked Loop)
Video Output : Standard Composite Video 1 v p-p, 75 ohm impedance via RCA socket, compatible with CCIR, PAL, EIA, NTSC, SECAM TV Systems.
Audio Output : Line Level, RCA socket

Receiver:

Power Supply Requirement: 12 ~ 14 VDC, 2.1 mm x 5.5 mm DC socket
Current: ~ 350 mA @ 12.5 Volts
Sensitivity: -92 dbm
Dimensions: 115 mm (W) 80 mm (D) 21 mm (H) excl sockets, ~ 250 g
Connection info here

Audio & Video Output for:

DVD Player, Satellite TV, Reversing Video Camera, Tuner, Camcorder, Surveillance Video Camera, PC DVD / MPEG / AVI Playback, TV Set (AV), Switcher, Video Monitor, PC Audio/Video Capture Card, VCR, DVR, etc.

Manufacturer's Experience: 10 + Years ISO 9001 Certified, made in Taiwan.

Compatibility:

Receives transmissions from: TX-Mini, TX-MOD 2, TX-MOD 3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500, TX-AV1000, TX-AV2000, TX-CAM2, TX-CAM2P & TX-CAM3.

Receives transmissions of Video & Left Audio Channel from TX-Box & TX/RX AV System II.

ANTENNAS

Range and Signal to Noise Ratio (SNR) may be improved by increasing gain of antenna on Receiver and/or Transmitter. For maximum signal transfer TX and RX antennas should be the same polarity, that is both oriented Vertically or Horizontally.

Ant-Stub pictured fitted to TX-CAM3

Ant-Stub (Net) $30

0 dBi gain, ~ 50 ohms impedance.

Length: ~ 52 mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.

Pictured fitted to TX-CAM 3.

SMA male Connector.

Folding Straight or Right-Angle 2.4 GHz 3 dBi Gain Microwave Whip Antenna

Ant-Whip (Gold) (A) $12 / (B) $15

~ 3 dBi gain, ~ 50 ohms impedance.

Length: ~ 107 mm straight ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams.

SMA male Connector.

SMA Male Connector wireless WAN link

Ant-W5dB (Gold) (A) $24 / (B) $30

~ 5 dBi gain, ~ 50 ohms impedance.

Length: ~ 195 mm straight ~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight: ~ 30 grams.

SMA male Connector.

Antenna 2.4 GHz ~ 9 dBi gain, N female Connector

Ant-W9dB (Gold) (A) $103 / (B) $129

~ 9 dBi gain, ~ 50 ohms impedance.

Length: ~ 610 mm ~ 825 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730 grams with Mounting Tube & Clamps/Brackets.

Supplied with Base Mount Tube and Clamps/Brackets for surface or Tubular Mast mounting. N female Connector. <Adaptors & Extension Cables>

Antenna 2.4 GHz ~ 12 dBi gain, N female Connector

Ant-W12dB (Gold) (A) $127 / (B) $159

~ 12 dBi gain, ~ 50 ohms impedance.

Length: ~ 1210 mm ~ 1425 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center section ~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams with Mounting Tube & Clamps/Brackets.

Supplied with Base Mount Tube and Clamps/Brackets for surface or Tubular Mast mounting. N female Connector.  <Adaptors & Extension Cables>

High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz

Ant-Y8 (Gold) (A) $69 / (B) $89
Yagi ~ 8 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-142 Coax cable. Dimensions (excluding Clamps) ~ 290 x 95 x 35 mm, ~ 530 grams.

Ant-Y12 (Gold) (A) $87 / (B) $109
Yagi
~ 12 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x 95 x 35 mm, ~ 600 grams.

Ant-Y15 (Gold) (A) $95 / (B) $119
Yagi
~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35 mm, ~ 680 grams.

Common Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x 70 mm Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz

Ant-Y8C (Gold) (A) $89 / (B) $109

Compact Yagi 2.4 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohms impedance. Beamwidth: E70, H90.

Dimensions (excluding Clamps) ~ 190 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz
High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz

Ant-Y10C (Gold) (A) $95 / (B) $119

COMPACT Yagi 2.4 ~ 2.5 GHz, ~ 10 dBi gain, ~ 50 ohms impedance. Beamwidth: E44, H56.

Dimensions (excluding Clamps) ~ 280 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector.

High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz

Ant-Y12C (Gold) (A) $103 / (B) $129

Yagi 2.4 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohms impedance. Beamwidth: E35, H40.

Dimensions (excluding Clamps) ~ 450 mm, ~ 75 mm diameter, ~ 650 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Antenna 2.4 GHz
High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz

Ant-Y16C (Gold) (A) $119 / (B) $149

Yagi 2.4 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28, H28.

Dimensions (excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Antenna 2.4 GHz
High Gain Directional Yagi  2.4 GHz Microwave Antenna 2.4 GHz

Ant-Y17.5C (Gold) (A) $143 / (B) $179

Yagi Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23, H24.

Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

COMPACT Flat Antenna 2.3 ~ 2.5 GHz, ~ 8 dBi gain

Ant-F8N (Gold) (A) $63 / (B) $79

COMPACT Flat Antenna 2.3 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 60 (H) ~ 70 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 95 (W) ~ 110 (H) ~ 30 mm (D), ~ 260 grams.
Pictured in Vertical Polarity orientation.
N female Connector
. <Adaptors & Extension Cables>

COMPACT Flat Antenna 2.3 ~ 2.5 GHz, ~ 12 dBi gain

Ant-F12 (Gold) (A) $95 / (B) $119

COMPACT Flat 2.3 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 28 (H) ~ 70 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps.

Dimensions (excludes Socket & Brackets) ~ 95 (W) ~ 212 (H) ~ 30 mm (D), ~ 500 grams. (Shipping weight 1010 grams)

Pictured in Vertical Polarity orientation.

N female Connector. <Adaptors & Extension Cables>

COMPACT Flat Antenna 2.3 ~ 2.5 GHz, ~ 16 dBi gain

Ant-F16 (Gold) (A) $127 / (B) $159

COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.

Beamwidth: ~ 27 (H) ~ 60 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps.

Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D), ~ 740 grams.

Pictured in Vertical Polarity orientation

N female Connector. <Adaptors & Extension Cables>

COMPACT Flat Indoor or OUTDOOR Antenna 2.3 ~ 2.5 GHz

Ant-F18 (Gold) (A) $151 / (B) $189

COMPACT Flat 2.3 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45 (H) ~ 75 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps.

Dimensions (excludes Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.

Pictured in Vertical Polarity orientation.

N female Connector. <Adaptors & Extension Cables>

COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain Antenna 2.4 GHz

Ant-P10 (Gold) (A) $87 / (B) $109

COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 30 (H) ~ 60 (V).

Supplied with Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.

Pictured in Vertical Polarity orientation.

SMA female Connector. <Adaptors & Extension Cables>

Ant-P18 pictured in Vertically Polarised position 2.4 ~ 2.5 GHz, ~ 18 dBi gain sectional Grid Parabolic Antenna 2.4 GHz

Ant-P18G (A) $95 / (B) $119

Sectional Grid Parabolic, 2.4 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance Dipole. Beamwidth ~ 25 in vertical polarity mode, Front to Back ratio ~ 20 dB. Fitted with ~ 750 mm RG-8/U Coax cable.

Reflector ~ 390 x ~ 545 mm. Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting hardware.

Carriage in an Air Satchel $24, via Post $35.

Pictured in Vertical Polarity orientation * Mast not included. Gold Irridite coated version pictured, we now stock a more durable Galvanised version only.

N male Connector. <Adaptors & Extension Cables>

ADAPTORS

SMA male to N female

SMAm-Nf (Net) $10

SMA male to N female. Suitable for P18G antenna.

SMA male to N male

SMAm-Nm (Net) $10

SMA male to N male. Suitable for F8N, W9dB, F12, W12dB, F16 & F18 antennas.

 

SMAm-m (Net) $10

SMA male to SMA male. Suitable for P10 antenna.

50 centimetre Extension Cable for Transmitters

Cable-178/30 (Gold) (A) $24 / (B) $30

30 cm RG-178 Coax cable with SMA male & female connectors.

~ 10 cm RG-178 Coax cable with SMA male connector.

Coax178/SMA (Net) $10

~ 10 cm RG-178 Coax cable with SMA male connector.

~ 4.5 metre Coax Cable for Transmitters - Receivers

Cable-23/450 (Gold) (A) $63 / (B) $79
~ 450 cm Coax Cable with SMA male & female connectors. Attenuation ~ 0.75 dB/metre @ 2 GHz.

Cable-23/450N (Gold) (A) $63 / (B) $79 not pictured
~ 450 cm Coax Cable with SMA & N male connectors. Attenuation ~ 0.75 dB/metre @ 2 GHz. Suitable for F8N, W9dB, F12, W12dB, F16 & F18 antennas.

Parabolic Yagi & Flat are directional antennas. Whip antennas when used vertically are for most practical purposes omni or non directional.

To maximise 'Range' minimise the length of Coax Cable between Antenna and TX/RX.

Antenna Gain... what does it mean ??? a simplified explanation

Received signal strength from an antenna with 3 dBi gain will be double that from an antenna that has 0 dBi gain, received signal strength from a 6 dBi will be double that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is approximately equal to doubling the transmitter output, received signal strength or range can be increased by raising antenna gain or transmitter output. Range can be doubled by either increasing antenna gain by 6 dBi or quadrupling the transmitter output.

The maximum allowed 2.4 GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in Australia), increasing transmitter output is illegal and therefore not an option.

Increasing the gain of the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to 3 dBi is equivalent to raising the output power of a 10 mW transmitter to ~ 20 mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW) 

* LIPD = Low Interference Potential Devices. * EIRP = Equivalent Isotropically Radiated Power. Source: Australian Communications Authority
Click below for information on Frequencies & Power Limits
http://www.aca.gov.au

4 Channel Compact 2.4 GHz Audio Video Receiver * Compact VIDEO & AUDIO 2.4 GHz RECEIVER * Wireless AV Receiver for VCRs, Satellite TV, DVD, PCs, Pay TV, MDS, Cable TV, Remote Control: Cars - Boats - Hovercraft - Aircraft * Portable CCTV Video Surveillance * Wireless Audio & Composite Video for Covert Tiny Hidden Pinhole Spy Video Cameras & Wireless Reception of CCTV Surveillance Audio & Video from Cameras, Switchers, Quad Screen Processors, Multiplexers, Monitors.