Microwave Linear RF Video Transmitter Booster

TRANSMITTER BOOSTERS
(Linear RF Amplifiers)

for: Radiofrequency Identification transmitters (918~926 & 2400~2450 MHz). Telecommand & Telemetry transmitters (2400~2450 MHz) L.I.P.D. Bands (Australia).

for: Wireless Area Networks, Wireless Internet Access, Video, Voice & Data 2400~2500 MHz Transmitters (Overseas)

BOOST-KIT (2.4 GHz)
(A) $199
(B) $223

Assembled ready-to-use + $15 (EXPORT SALES ONLY !)

9 VDC 1 Amp Plug Pack + $5 *** This Plug-Pack has round non-Australian Mains Pins, mains wiring could be soldered to pins and insulated with Heatshrink Tubing.

 

RF-IC (900 MHz)
28 dB $79
9 dB $10

 

2.4 GHz Antennas

Whip Antenna $15

Whip Antenna Folding $20

Flat Antenna $15

Yagi-8 Antenna (Gold ?) (A) $99 / (B) $109

Yagi-12 Antenna (Gold ?) (A) $117 / (B) $130

Yagi-15 Antenna (Gold ?) (A) $143 / (B) $159

Para-18 Antenna (Gold ?) (A) $89 / (B) $99

Para-21 Antenna (Gold ?) (A) $116 / (B) $129

Para-24 Antenna (Gold ?) (A) $152 / (B) $169

RG-178 Coax Extension Cable $25
** Adaptor: SMA male to "N" female $5 with parabolic
Adaptor: SMA male to TNC female $10

 

Linear Amplifiers to increase the RF Output and Range of low-power transmitters.

Use these Amplifiers to increase the output of a 5 ~ 10 milliwatt transmitter by up to ~ 1000 milliwatts E.I.R.P. (the maximum permitted output for the Low Interference Potential Devices listed above)

The transmitter output (normally connected to antenna) connects to the input of the Booster and the Booster output connects to the antenna.

 

BOOST-Kit Specifications:

Amplifier Bandwidth: 2400 ~ 2500 MHz

Gain: ~ 20 dB

Input Power: 10 ~ 15 dBm

Output Power: 28 ~ 30 dBm, 50 ohms impedance

Supply Voltage: 9 Volts DC, via ~ 75 mm wires, amplifier operates at 6 VDC via a 3 Terminal Voltage Regulator on PCB

Supply Current: ~ 600 mA

Input: SMA Male Plug

Output: SMA Female Socket

Dimensions: ~ 50 mm x ~ 50 mm x ~ 19 mm excluding Plug, Socket & Mounting Lugs. ~ 75 mm x ~ 50 mm x ~ 19 mm including Plug, Socket & Mounting Lugs.

Weight: ~ 83 Grams

Range @ 1 Watt, in ideal, clear, Line-of-Sight conditions possibly up to ~ 15 kilometres with correctly aligned, oriented and matched 24 dBi gain antennas. It is impossible to accurately specify range as it is affected by surroundings, structures, obstructions, EMI, RFI, etc.

28dB RF-IC Specifications:

Amplifier Bandwidth: Type "1"  824 ~ 930 MHz. Type "2" 900 ~ 930 Mhz

Gain: 26 ~ 28 dB

Output: 1.2 watts typically, 1.6 watts maximum, efficiency ~ 55%, 50 ohms impedance

Input: 5 milliwatts maximum, 50 ohms impedance

Supply Voltage: 5 VDC typically, 7 VDC max

Supplied with copy of manufacturer's (Philips) Data Sheet.

9 dB RF-IC Specifications:

Amplifier Bandwidth 10 ~ 1000 MHz

Gain: ~ 9 dB

Output Power: + 17.5 dBm max, 50 ohms impedance

Input Impedance: 50 ohms

Supply Voltage: 5.5 VDC max

Supplied with copy of manufacturer's (Mini-Circuits) Data Sheet.