EXPORT SALES ONLY ! - NOT
AVAILABLE in Australia This 1000 milliwatt Transmitter does
not comply with Australian
Communications Authority regulations therefore it is not available in
Australia, available to overseas buyers ONLY !
HIGH OUTPUT 1 000 milliwatt.
4 Channel 2.4 GHz Video Transmitter
with Line Level Audio input, fully self contained only requires Antenna
and Power supply to operate.
Video Input: Composite
Video standard 1 V p-p, 75 ohms, compatible with CCIR, PAL, EIA, NTSC,
SECAM TV Systems. Audio Input: Maximum 2 V p-p.
Power Requirements: 11 ~
13 Volts DC well filtered and Regulated, suitable for operation from a
12 Volt Battery, 500 ~ 600 mA, via 2.1 x 5.5 mm DC socket, center pin
= (+)
.
Unit requires good
ventilation, operating temperature @ 20°C ambient is ~ 45°C.
Dimensions: ~ 61 mm (W) 35
mm (H) 47 mm (D) excludes antenna socket, ~ 130 grams.
Wireless Video & Audio RF
Transmission link for covert spy and Cable-Free Wireless CCTV Video Surveillance
Cameras, Quad Screen Processors, Switchers, Monitors, Multiplexers, Video
Recorders, Digital PC Recording.
Portable Wireless Video
Transmitter for covert pinhole video camera surveillance in Shops - Showrooms -
Exhibitions - Work Places - Casinos - Theatres - Concerts - Nightclubs - Outdoor
Events - Cinemas - etc. Portable Home Video Surveillance to monitor Swimming
Pools - Caravans - Boats - etc.
Observation of Horses - Show
Animals - Livestock - etc during transportation in Floats - Trucks - etc.
Automobile Rear Vision and
general observation Video Systems for Caravans - Large Boats - Semi Trailers -
Road Trains - Aircraft - Buses - Modern or Historic choo.. choo..
Trains - etc.
Wireless AV link for VCRs,
Satellite TV, DVD, PCs, Pay TV, MDS, Cable TV, Lightweight Compact Video Cameras
for shooting video program material, Remote Control: Cars - Boats - Hovercraft -
etc.
RANGE
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones, Wireless LAN, etc),
Antenna Alignment, Electromagnetic & Radio Frequency interference in the
vicinity. This device may be affected by and may affect other devices that
operate on or near the same frequency causing minor to severe interference.
In ideal, clear, Line-of-Sight
conditions:
5 dBi Whip antennas on TX & RX up
to ~ 1 000 metres.
Correctly matched and aligned 18
dBi antennas on TX & RX up to ~ 5 000 metres.
Due to the nature of Radio Signals
results are unpredictable (in the same manner as Mobile / Cellular Telephones)
signals reflected from surrounding objects arriving at Receiver antenna may
Add-to or Subtract-from the direct signal from Transmitter. Directional antennas
may reduce affect of reflected signals.
ANTENNAS
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on Receiver and Transmitter.
For maximum signal transfer TX and RX antennas should be the same polarity, that
is both oriented Vertically or Horizontally.
Length: ~ 1210 mm ~ 1425 mm with
Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center section
~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams with Mounting Tube &
Clamps/Brackets.
Supplied with Base Mount Tube and
Clamps/Brackets for surface or Tubular Mast mounting. N female
Connector. <Adaptors & Extension
Cables>
Cat Code:
Ant-Y8
$69
Discontinued
Yagi ~ 8 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-142 Coax cable. Dimensions
(excluding Clamps) ~ 290 x 95 x 35 mm, ~ 530 grams.
Cat Code:
Ant-Y12 $89
Discontinued
Yagi ~ 12 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x 95 x
35 mm, ~ 600 grams.
Cat Code: Ant-Y15$79
Yagi ~ 15 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x
35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x 70 mm
Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
Dimensions (excluding
Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~ 500 mm RG-58 Coax
cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured
in Vertical Polarity orientation * Mast not included.
Dimensions (excluding
Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~ 500 mm RG-58 Coax
cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured
in Vertical Polarity orientation * Mast not included.
SMA male (internal thread, pin contact, Hex Nut) to N female.
Suitable for P18G (discontinued) antenna.
Cat Code: SMAm-Nm
$10
SMA male (internal thread, pin
contact, Hex Nut) to N male. Suitable for W12dB, F16 & F18
antennas.
Cat Code: SMAm-m
$10
SMA male (internal thread,
pin contact, Hex Nut) to SMA male. Suitable for P10 antenna.
Cat Code:
Cable-178/30 $19
30 cm RG-178 Coax cable
with SMA male & female connectors.
Cat Code:
Cable-58/450 $39
~ 450 cm Coax Cable with SMA
male & female connectors. Attenuation 0.6 ~ 0.9 dB/metre @ 2
GHz.
Cat Code:
Cable-23/450N $39
not pictured ~ 450 cm Coax Cable
with SMA & N male connectors. Attenuation ~ 0.75
dB/metre @ 2 GHz. Suitable for W12dB, F16 & F18
antennas.
Parabolic Yagi & Flat
are directional antennas. Whip antennas when used vertically are
for most practical purposes omni or non directional.
To maximise 'Range'
minimise the length of Coax Cable between Antenna and TX/RX.
Antenna Gain... what
does it mean ??? a simplified explanation
Received signal
strength from an antenna with 3 dBi gain will be double that from an
antenna that has 0 dBi gain, received signal strength from a 6 dBi
will be double that from a 3 dBi and so on... An increase in antenna
gain of 3 dBi is approximately equal to doubling the transmitter
output, received signal strength or range can be increased by raising
antenna gain or transmitter output. Range can be doubled by either
increasing antenna gain by 6 dBi or quadrupling the transmitter
output.
Increasing the gain
of the receiver antenna is an alternative to increasing transmitter
output. In very simple terms: increasing antenna gain from 0 dBi
to 3 dBi is equivalent to raising the output power of a 1 Watt
transmitter to ~ 2 Watts. (5 dBi to ~ 3.3 Watts) ( 8 dBi to ~ 6.6
Watts) (12 dBi to ~ 16 Watts) (15 dBi to ~ 32 Watts) (18 dBi to ~ 64
Watts)
* LIPD = Low Interference
Potential Devices. * EIRP = Equivalent Isotropically Radiated Power.
Source: Australian Communications Authority
Click below for information on Frequencies & Power Limits
http://www.aca.gov.au/legal/licence/class/lipd.htm
** Information
plagiarised from this page may be found on 'copy-cat' Web Sites **
Use your Browser "Back Button"
to return to previous page
1 000 milliwatt Video
Transmitter VIDEO & AUDIO 2.4 GHz AV Sender, self contained 4 Channel Wireless
CCTV Spy Covert Video Transmitter ideal for Covert Spy Concealed or Discreet
Video Surveillance, Compact Portable CCTV Video Surveillance or for In-Camera
Installation. Range in ideal clear line-of-sight conditions up to 5 kilometres
with High Gain Antennas.
