50 milliwatt Tiny Video Transmitter

EXPORT SALES ONLY ! - NOT AVAILABLE in Australia
This 50 milliwatt Transmitter does not comply with Australian Communications Authority regulations therefore it is not available in Australia, available to overseas buyers ONLY !

50 milliwatt Tiny Video Transmitter

 


 

 

50 milliwatt Tiny Video Transmitter

$69

HIGH OUTPUT 50 milliwatt.

TX-AV050 4 Channel 2.4 GHz Video Transmitter Module with Line Level Audio input, fully self contained only requires Antenna and Power supply to operate.

4 Channel Video & Audio Transmitter Module.

Output: 2.4 ~ 2.483 GHz, 50 (+/- 20) milliwatts EIRP with 3 dBi Whip antenna, 50 ohms impedance, SMA Female Socket.

Video Input: Composite Video standard 1 V p-p, 75 ohms, compatible with CCIR, PAL, EIA, NTSC, SECAM TV Systems.

Audio Input: Maximum 2 V p-p.

Power Requirements: 10 ~ 12 Volts DC well filtered and Regulated, ~ 140 mA.

Inputs: ~ 100 mm Wires via socket to suit Cable-TX2 Plug-In Cable Set.

Dimensions: ~ 44 x ~ 38 x ~ 12 mm, ~ 29 grams.

pictured with accessory (discontinued type) Whip antenna

Connection info here

Cable-TX2 PLUG-IN Cable
50 milliwatt Tiny Video Transmitter Cable & Plugs

50 milliwatt Tiny Video Transmitter

Manufacturer's Experience: 10 + Years ISO 9001 Certified, made in Taiwan.

Module is completely "Self-Contained" no interface PCB or any other components required. Simply connect to Power Supply, Video or Audio source and Antenna.


Need Sound ? click here

Compatibility: Transmissions may be received with:

4 Channel Mini 2.4 GHz Audio Video Receiver
RX-Mini Mini 2.4 GHz AV Receiver

Video Transmitter Receiver 5.6 inch LCD TFT Colour Monitor
RX-TFT-56
2.4 GHz AV Receiver & 5" Colour TFT LCD Monitor

USES

Wireless Video & Audio RF Transmission link for covert spy and Cable-Free Wireless CCTV Video Surveillance Cameras, Quad Screen Processors, Switchers, Monitors, Multiplexers, Video Recorders, Digital PC Recording.

Portable Wireless Video Transmitter for covert pinhole video camera surveillance in Shops - Showrooms - Exhibitions - Work Places - Casinos - Theatres - Concerts - Nightclubs - Outdoor Events - Cinemas - etc. Portable Home Video Surveillance to monitor Swimming Pools - Caravans - Boats - etc.

Observation of Horses - Show Animals - Livestock - etc during transportation in Floats - Trucks - etc.

Automobile Rear Vision and general observation Video Systems for Caravans - Large Boats - Semi Trailers - Road Trains - Aircraft - Buses - Modern or Historic choo.. choo.. Trains - etc.

Wireless AV link for VCRs, Satellite TV, DVD, PCs, Pay TV, MDS, Cable TV, Lightweight Compact Video Cameras for shooting video program material, Remote Control: Cars - Boats - Hovercraft - etc.

RANGE

Depends on surroundings, obstructions, buildings, antenna gain, other transmitters, EMI & RFI in the vicinity.

In ideal, clear, Line-of-Sight conditions:

Vertical 5 dBi Whip antennas on TX & RX up to ~ 300 metres.

Correctly matched and aligned 18 dBi antennas on TX & RX up to ~ 2 400 metres.

Due to the nature of Radio Signals results are unpredictable (in the same manner as Mobile / Cellular Telephones) signals reflected from surrounding objects arriving at Receiver antenna may Add-to or Subtract-from the direct signal from Transmitter. Directional antennas may reduce affect of reflected signals.

ANTENNAS

Range and Signal to Noise Ratio (SNR) may be improved by increasing gain of antenna on Receiver and Transmitter. For maximum signal transfer TX and RX antennas should be the same polarity, that is both oriented Vertically or Horizontally.

Microwave Antenna 2.4 GHZ

Ant-Stub $30

0 dBi gain, ~ 50 ohms impedance.

Length: ~ 52 mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.

Pictured fitted to TX-CAM 3.

SMA male Connector.

2.4 GHz 3 dBi Gain Microwave Whip Antenna

Ant-Whip $10

~ 3 dBi gain, ~ 50 ohms impedance.

Length: ~ 107 mm straight ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams.

SMA male Connector.

~ 5 dBi gain Microwave Antenna 2.4 GHz

Ant-W5dB $20

~ 5 dBi gain, ~ 50 ohms impedance.

Length: ~ 195 mm straight ~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight: ~ 30 grams.

SMA male Connector.

~ 9 dBi gain Microwave Antenna 2.4 GHz

Ant-W9dB $99

~ 9 dBi gain, ~ 50 ohms impedance.

Length: ~ 610 mm ~ 825 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center section ~ 24 mm top cap. Weight: ~ 470 grams ~ 730 grams with Mounting Tube & Clamps/Brackets.

Supplied with Base Mount Tube and Clamps/Brackets for surface or Tubular Mast mounting. N female Connector. <Adaptors & Extension Cables>

~ 12 dBi gain Microwave Antenna 2.4 GHz N female Connector

Ant-W12dB $129

~ 12 dBi gain, ~ 50 ohms impedance.

Length: ~ 1210 mm ~ 1425 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm main center section ~ 24 mm top cap. Weight: ~ 670 grams ~ 930 grams with Mounting Tube & Clamps/Brackets.

Supplied with Base Mount Tube and Clamps/Brackets for surface or Tubular Mast mounting. N female Connector.  <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz High Gain Directional Yagi

Ant-Y8 $69
Yagi ~ 8 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-142 Coax cable. Dimensions (excluding Clamps) ~ 290 x 95 x 35 mm, ~ 530 grams.

Ant-Y12 $89
Yagi
~ 12 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 430 x 95 x 35 mm, ~ 600 grams.

Ant-Y15 $99
Yagi
~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35 mm, ~ 680 grams.

Common Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~ 140 x 70 mm Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz Directional Yagi

Ant-Y8C $89

Compact Yagi 2.4 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohms impedance. Beamwidth: E70, H90.

Dimensions (excluding Clamps) ~ 190 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz Directional Yagi
Microwave Antenna 2.4 GHz Directional Yagi

Ant-Y10C $99

COMPACT Yagi 2.4 ~ 2.5 GHz, ~ 10 dBi gain, ~ 50 ohms impedance. Beamwidth: E44, H56.

Dimensions (excluding Clamps) ~ 280 mm, ~ 75 mm diameter, ~ 500 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector.

Microwave Antenna 2.4 GHz Directional Yagi

Ant-Y12C $109

Yagi 2.4 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohms impedance. Beamwidth: E35, H40.

Dimensions (excluding Clamps) ~ 450 mm, ~ 75 mm diameter, ~ 650 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz
Directional Yagi Microwave Antenna 2.4 GHz

Ant-Y16C $119

Yagi 2.4 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28, H28.

Dimensions (excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz
Yagi Microwave Antenna 2.4 GHz

Ant-Y17.5C $149

Yagi Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23, H24.

Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included.

SMA male Connector. <Adaptors & Extension Cables>

Flat Microwave Antenna 2.4 GHz

Ant-F8N $69

COMPACT Flat Antenna 2.3 ~ 2.5 GHz, ~ 8 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 60 (H) ~ 70 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 95 (W) ~ 110 (H) ~ 30 mm (D), ~ 260 grams.
Pictured in Vertical Polarity orientation.
N female Connector
. <Adaptors & Extension Cables>

COMPACT Flat Microwave Antenna 2.4 GHz

Ant-F12 $99

COMPACT Flat 2.3 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 28 (H) ~ 70 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps.

Dimensions (excludes Socket & Brackets) ~ 95 (W) ~ 212 (H) ~ 30 mm (D), ~ 500 grams. (Shipping weight 1010 grams)

Pictured in Vertical Polarity orientation.

N female Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz Flat Antenna

Ant-F16 $129

COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.

Beamwidth: ~ 27 (H) ~ 60 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps.

Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D), ~ 740 grams.

Pictured in Vertical Polarity orientation

N female Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz Flat Indoor or OUTDOOR

Ant-F18 $149

COMPACT Flat 2.3 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45 (H) ~ 75 (V).

Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps.

Dimensions (excludes Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams.

Pictured in Vertical Polarity orientation.

N female Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz Semi-Parabolic

Ant-P10 $89

COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 30 (H) ~ 60 (V).

Supplied with Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.

Pictured in Vertical Polarity orientation.

SMA female Connector. <Adaptors & Extension Cables>

Microwave Antenna 2.4 GHz Vertically Polarised

Ant-P18G $119

Sectional Grid Parabolic, 2.4 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance Dipole. Beamwidth ~ 25 in vertical polarity mode, Front to Back ratio ~ 20 dB. Fitted with ~ 750 mm RG-8/U Coax cable.

Reflector ~ 390 x ~ 545 mm. Weight ~ 1.7 kilograms. Supplied with Hor/Vert Clamp mounting hardware.

Carriage in an Air Satchel $24, via Post $35.

Pictured in Vertical Polarity orientation * Mast not included. Gold Irridite coated version pictured, we now stock a more durable Galvanised version only.

N male Connector. <Adaptors & Extension Cables>

ADAPTORS

SMA male to N female

SMAm-Nf $10

SMA male to N female. Suitable for P18G antenna.

SMA male to N male

SMAm-Nm $10

SMA male to N male. Suitable for F8N, W9dB, F12, W12dB, F16 & F18 antennas.

 

SMAm-m $10

SMA male to SMA male. Suitable for P10 antenna.

50 centimetre Extension Cable Microwave Antenna

Cable-178/30 $19

30 cm RG-178 Coax cable with SMA male & female connectors.

Microwave Antenna 2.4 GHz ~ 10 cm RG-178 Coax cable with SMA male connector.

Coax178/SMA $10

~ 10 cm RG-178 Coax cable with SMA male connector.

~ 4.5 metre Coax Cable for Microwave Antenna 2.4 GHz

Cable-23/450 $59
~ 450 cm Coax Cable with SMA male & female connectors. Attenuation ~ 0.75 dB/metre @ 2 GHz.

Cable-23/450N $59 not pictured
~ 450 cm Coax Cable with SMA & N male connectors. Attenuation ~ 0.75 dB/metre @ 2 GHz. Suitable for F8N, W9dB, F12, W12dB, F16 & F18 antennas.

Parabolic Yagi & Flat are directional antennas. Whip antennas when used vertically are for most practical purposes omni or non directional.

To maximise 'Range' minimise the length of Coax Cable between Antenna and TX/RX.

Antenna Gain... what does it mean ??? a simplified explanation

Received signal strength from an antenna with 3 dBi gain will be double that from an antenna that has 0 dBi gain, received signal strength from a 6 dBi will be double that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is approximately equal to doubling the transmitter output, received signal strength or range can be increased by raising antenna gain or transmitter output. Range can be doubled by either increasing antenna gain by 6 dBi or quadrupling the transmitter output.

The maximum allowed 2.4 GHz LIPD Video Transmitter output power is 10 milliwatts (mW) EIRP (in Australia), increasing transmitter output is illegal and therefore not an option.

Increasing the gain of the receiver antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to 3 dBi is equivalent to raising the output power of a 10 mW transmitter to ~ 20 mW. (5 dBi to ~ 33 mW) ( 8 dBi to ~ 66 mW) (12 dBi to ~ 160 mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW)

* LIPD = Low Interference Potential Devices. * EIRP = Equivalent Isotropically Radiated Power. Source: Australian Communications Authority
Click below for information on Frequencies & Power Limits
http://www.aca.gov.au

50 milliwatt Video Transmitter & Audio 2.4 GHz AV Sender with SMA Antenna connection for High Gain Antennas suitable for transmission of signals from Wireless Covert Tiny Hidden Pinhole Spy Video Cameras, DVR, VCR, Satellite TV, DVD, PC, Pay TV, Surveillance Cameras, Cable TV, Remote Control Cars - Boats - Hovercraft, Security Cameras, Portable & Covert CCTV Video Surveillance * Range up to 100 metres - up to 2.4 kilometres with High 18 dB Gain Antennas.