Video Transmitter Camera Microphone Receiver Wireless Audio Video Sender
AV Sender * 2.4 GHz Video Transmitter & Receiver * Wireless Video Camera with Microphone * 4 Channel Receiver * Suitable for Home / Business Surveillance to observe Babies, Children, Swimming Pools, Front Door, Showroom, Offices, etc.

Video Transmitter Camera Microphone Receiver Wireless Audio Video Sender

(A) $209
(B) $259

TX/RX-AVCAM Colour Wireless Video Camera with Microphone & Receiver.

  • 2.4 GHz 4 Channel AV Auto-Switching Receiver.

  • 2.4 GHz Wireless Camera with Microphone.

  • Option to operate from Batteries.

TX/AVCAM with Plug Pack
RX/AVCAM with Plug Pack

Video Transmitter Camera Microphone Receiver Wireless Audio Video Sender

Video Transmitter Camera Microphone Receiver Wireless Audio Video Sender

TRANSMITTER (TX-AVCAM)
 
Picture Elements
~ 300 000, Omnivision Image Sensor.
TV System
PAL (Australia/Europe) 50 fields (25 Frames) per second.
Lens
6 mm Focal Length, Width-of-Vision Lens info, no optional lenses available.
Transmitter
2.4 ~ 2.483 GHz, 4 Channel AV (Australia 3 Ch).
RF Output Power
10 mW EIRP, maximum permitted in Australia, click here for more information.
Antenna
Fixed Vertical Whip Antenna.
Resolution
~ 400 Horizontal Lines (this value is provided for comparative purposes only).
Signal to Noise Ratio
~ 45 dB, measured with AGC Off.
Minimum Illumination
~ 3 Lux @ F1.2 (this value is provided for comparative purposes only).
Built-in
Microphone.
Power Requirements
6 Volts DC Well Filtered, (10 Volts Maximum), ~ 80 mA @ 6 Volts, via 2.1 x 5 mm DC socket, center = (+).
Overall Dimensions / Weight
~ 75 x ~ 60 x 100 mm, Antenna ~ 85 mm, ~ 130 grams.
2.4 GHz Compatibility
Transmits Signals to RX-AVCAM Receiver.
RECEIVER (RX-AVCAM)
 

Receiver / Switcher

2.4 Ghz, 4 Channel with Fixed Vertical Whip Antenna, Manual selection of any Channel or Automatic Sequential Switching with 5 second dwell.
Output
Mono Audio & Composite PAL Video 1.14 V p-p 75 ohms impedance via RCA female sockets.
Power Requirements
6 Volts DC Well Filtered, (10 Volts Maximum), ~ 200 mA @ 9 Volts, via 2.1 x 5 mm DC socket, center = (+).
Overall Dimensions / Weight
~ 103 x ~ 72 x ~ 32 mm, ~ 1000 grams.
2.4 GHz Compatibility
Receives Signals from TX/AVCAM Camera/Transmitter.

*

Width of Vision with 6 mm Lens

2.4 metres @ 3 metres 4 metres @ 3 metres 7.2 metres @ 3 metres 12 metres @ 3 metres

Compatibility: Transmits signals to & Receives signals from:
VGA-VID/WirelessGrand Ultimate Wireless - VGA to VIDEO 1280 x 1024 Wireless VGA to Video Converter

TX/RX-AV/LCDWireless Video Transmitter & Receiver

Range:
Depends on Surroundings, Obstructions, Other Transmitters, Antenna Alignment, EMI & RFI in the vicinity. In ideal, clear, Line-of-Sight conditions up to ~ 100 metres. Due to the nature of Radio Signals results are unpredictable (in the same manner as Mobile / Cellular Telephones) signals reflected from surrounding objects arriving at Receiver antenna may Add-to or Subtract-from the direct signal from Transmitter. In a typical 'Household' type situation reception between Rooms with antennas aligned may vary from Excellent to Poor.

Package Contents:
Wireless Camera with Bracket, Receiver, Two 6 VDC 800 mA unregulated Plug Packs, Cable-RCA3 interconnecting Cable for RX.

Options:
Cat Code: Batt-Box Plastic Battery Box (66 x 64 x 19 mm) holds four AA Batteries, ~ 30 cm Cable with 2.1 x 5 mm DC Plug (to power Camera or Receiver)

In Australia Video Transmitters may be legally used without a licence within the *LIPD 10 mW *EIRP 2.4 ~ 2.463 GHz Band (Channels 1, 2 & 3 ONLY may be used in Australia). *LIPD = Low Interference Potential Devices. *EIRP = Equivalent Isotropically Radiated Power. Source: Australian Communications Authority. Click below for information on Frequencies & Power Limits.
http://www.aca.gov.au