High Power 50 milliwatt Video Transmitter

High Power 50 milliwatt Video Transmitter * TINY VIDEO & AUDIO 2.4 GHz TRANSMITTER MODULE * Wireless AV Modules * Fully self contained Video Transmitter in smaller than Matchbox size case, ideal for Covert Spy or Compact Portable CCTV Video Surveillance or In-Camera Installation * Range in ideal clear line-of-sight conditions up to 100 metres - up to 1.6 kilometres with our High Gain Antennas * Multi Channel (Australia = 2 * Export = 4) * Extended Range Dipole - Yagi - Parabolic Antennas * Wireless Audio & Composite Video inputs for Covert Tiny Hidden Pinhole Spy Video Cameras & Transmission of CCTV Surveillance Video from/to Cameras, Switchers, Quad Screen Processors, Multiplexers, Monitors. Wireless AV Link / Sender for: VCRs, Satellite TV, DVD, PCs, Pay TV, MDS, Cable TV, Remote Control: Cars - Boats - Hovercraft.

TX-AV50 $129

High Power 50 milliwatt 2.4 GHz Wireless Video & Audio TRANSMITTER MODULE
High Power 50 milliwatt Video Transmitter
EXPORT SALES ONLY ! - NOT AVAILABLE in Australia
This 50 milliwatt Transmitter does not comply with
Australian Communications Authority regulations therefore it is not available in Australia, available to overseas buyers ONLY !

Accessories
Cable-TX2 Plug-In Cable Set + $5 (pix below)

Ant-Whip Antenna $20
(Pack of 50 Ant-Whip $10 each)
Ant-Whip/RA
Antenna $25
Ant-Y8
Antenna (Gold ?) (A) $99 / (B) $119
Ant-Y12
Antenna (Gold ?) (A) $119 / (B) $139
Ant-Y15
Antenna (Gold ?) (A) $149 / (B) $169
Ant-P21
Antenna (Gold ?) (A) $109 / (B) $129
Ant-P24
Antenna (Gold ?) (A) $149 / (B) $169

Cable-178/30 Cable $25
Cable-316/50
Cable $35
Cable-316/500
Cable $79
Cable-223/450
Cable $89

SMA-N Adaptor $10
SMA-TNC
Adaptor $10

High Power 50 milliwatt Transmitter
pictured with accessory (discontinued type) Whip antenna

Four Channel Video & Audio Transmitter Module.

Output: 2.4 ~ 2.483 GHz, 50 mW EIRP with Whip antenna, 50 ohms impedance, via SMA Female Socket.

Video Input: Composite Video standard 1 V p-p, 75 ohms, compatible with CCIR, PAL, EIA, NTSC, SECAM TV Systems.

Audio Input: 2 V p-p.

Power Requirements: 10 ~ 12 Volts DC well filtered and Regulated, 105 ~ 140 milliamps.

Inputs: via ~ 100 mm Wires with socket to suit accessory Plug-In Cable Set.

Dimensions: ~ 44 mm x ~ 38 mm x ~ 12 mm, ~ 29 grams.

Security camera

Cable - High Power 50 milliwatt Video Transmitter
Cat Code: Cable-TX2. PLUG-IN Cable Set

50 milliwatt Video Transmitter

 

Module is completely "Self-Contained" no interface PCB or any other components required.

Simply connect to Power Supply, Video or Audio source and Antenna.

 


Need Sound ? Security Microphone

 

Compatibility:

Transmissions may be received with:

Compact VIDEO & AUDIO 2.4 GHz RECEIVER
RX-COMPACT
2.4 GHz AV Receiver

Video Transmitter Receiver
RX-TFT-56
2.4 GHz AV Receiver & 5.6" Colour TFT LCD Monitor

 

USES

Wireless Video & Audio RF Transmission link for covert spy and Cable-Free Wireless CCTV Video Surveillance Cameras, Quad Screen Processors, Switchers, Monitors, Multiplexers, Video Recorders, Digital PC Recording.

Portable Wireless Video Transmitter for covert pinhole video camera surveillance in Shops - Showrooms - Exhibitions - Work Places - Casinos - Theatres - Concerts - Nightclubs - Outdoor Events - Cinemas - etc. Portable Home Video Surveillance to monitor Swimming Pools - Caravans - Boats - etc.

Observation of Horses - Show Animals - Livestock - etc during transportation in Floats - Trucks - etc.

Automobile Rear Vision and general observation Video Systems for Caravans - Large Boats - Semi Trailers - Road Trains - Aircraft - Buses - Modern or Historic choo.. choo.. Trains - etc.

Wireless AV link for VCRs, Satellite TV, DVD, PCs, Pay TV, MDS, Cable TV, Lightweight Compact Video Cameras for shooting video program material, Remote Control: Cars - Boats - Hovercraft - etc.

 

RANGE

Depends on surroundings, obstructions, structures, antenna gain, other transmitters, EMI and RFI in the vicinity.

In ideal, clear, Line-of-Sight conditions

Vertical Whip antennas up to ~ 200 metres.

Correctly matched and aligned Yagi 15 dBi antennas on Transmitter and Receiver up to ~ 2 kilometres.

Correctly matched and aligned Parabolic 24 dBi antennas on Transmitter and Receiver up to ~ 6 kilometres.

 

ANTENNAS

Range and Signal to Noise Ratio may be improved by fitting a higher gain antenna to Receiver. For maximum signal strength TX and RX antennas must be the same polarity, that is both oriented Vertically or Horizontally.

Ant-Whip ~ 3 dBi gain, ~ 9 mm diameter, ~ 107 mm long Straight, ~ 87 mm long Folded, ~ 11 grams. SMA Male Connector.
Folding Straight or Right-Angle 2.4 GHz 3 dBi Gain Microwave Whip Antenna

Ant-Whip/RA Right-Angle, Semi-Flexible, ~ 3 dBi gain, ~ 6.7 mm diameter, ~ 110 mm long, ~ 7 grams. SMA Male Connector.
Microwave Antenna Right-Angle, Semi-Flexible, ~ 3 dBi gain

Ant-W5dB ~ 5 dBi gain, ~ 195 mm long Straight, ~ 170 mm long Folded, ~ 30 grams. SMA Male Connector.
Microwave Antenna  ~ 5 dBi gain

 

Ant-Y8 2.4 ~ 2.5 GHz, ~ 8 dBi gain. 6 Element, ~ 290 x 95 x 35 mm excluding Clamps, ~ 530 grams. (volumetric shipping weight ~ 1.2 kg³)

Ant-Y12 2.4 ~ 2.5 GHz, ~ 12 dBi gain. 10 Element, ~ 430 x 95 x 35 mm excluding Clamps, ~ 600 grams. (volumetric shipping weight ~ 1.6 kg³)

Ant-Y15 2.4 ~ 2.5 GHz, ~ 15 dBi gain. 15 Element, ~ 650 x 95 x 35 mm excluding Clamps, ~ 680 grams. (volumetric shipping weight ~ 2.30 kg³)

Dipole ~ 50 ohms impedance, ~ 500 mm RG-142 Coax cable with SMA Male Plug, ~ 140 mm x ~ 70 mm Aluminium mounting plate, plated Steel Clamps, Nuts, Washers, Brass Spacers.
Microwave Antenna High Gain Directional Yagi  2.4 GHz

 

Ant-P21 2.4 ~ 2.5 GHz, ~ 21 dBi gain sectional Grid Parabolic with ~ 50 ohm impedance Dipole and Sub-Reflector. Horizontal and Vertical polarisation mounting points. Fitted with ~ 800 mm RG-8/U Coax cable and Male "N" Connector **. Reflector ~ 395 mm x ~ 885 mm. Weight ~ 2.4 kilograms. Supplied with Hor/Vert Clamp hardware. Delivery by Road to most locations $35 ~ $40.
Microwave Antenna 21 dBi
pictured in Vertical Polarity mode * Mast not included

Ant-P24 2.4 ~ 2.5 GHz, ~ 24 dBi gain sectional Grid Parabolic with ~ 50 ohm impedance Dipole and Sub-Reflector. Horizontal and Vertical polarisation mounting points. Fitted with ~ 750 mm RG-8/U Coax cable and Male "N" Connector **. Reflector ~ 590 mm x ~ 900 mm. Weight ~ 3.5 kilograms. Supplied with Hor/Vert Clamp hardware. Delivery by Road to most locations $40 ~ $45.
Microwave Antenna 24 dBi Microwave Antenna 24 dBi
pictured in Vertical Polarity mode * Mast not included

Microwave Antenna Multiple Mast Mounting Positions

 

SMA-N Adaptor SMA male to N female, for Parabolic antennas.

Coax Extension Cables with SMA male & female connectors: 30 cm (RG178), 50 & 500 cm RG-316, 450 cm RG-223, suitable for Whip & Yagi antennas & Parabolic antenna with SMA-N adaptor.

50 centimetre Extension Cable
Cable-316/50 Attenuation ~ 60 dB / 30 metres @ 3 GHz
5 metre Extension Cable for Transmitters
Cable-316/500. Attenuation ~ 60 dB / 30 metres @ 3 GHz

~ 4.5 metre RG223 Extension Cable for Transmitters
Cable-223/450. Attenuation ~ 16.7 dB / 30 metres @ 3 GHz

NOTE: Parabolic and Yagi are directional antennas.

Whip antennas are for most practical purposes omni or non directional when used vertically.

Antenna Gain... what does it mean ???
a simplified explanation

Received signal strength from an antenna with 3 dBi gain will be double that from an antenna that has 0 dBi gain, received signal strength from a 6 dBi will be double that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is approximately equal to doubling the transmitter output power, received signal strength or range can be increased by raising antenna gain or transmitter output power. Range can be doubled by either increasing antenna gain by 6 dBi or quadrupling the transmitter output power.

Increasing the gain of the receiver and/or transmitter antenna is an alternative to increasing transmitter output power.
In very simple terms: increasing antenna gain from 0 dBi to 3 dBi is equivalent to raising the Power Output of a 50 milliwatt Transmitter to ~ 100 mW, 5 dBi ~ 165 mW, 8 dBi ~ 330 mW, 12 dBi ~ 800 mW, 15 dBi ~ 1.6 Watts, 18 dBi ~ 3.2 Watts, 21 dBi ~ 6.4 Watts, 24 dBi ~ 12.8 Watts. 

Warranty

* LIPD = Low Interference Potential Devices
* EIRP = Equivalent Isotropically Radiated Power
Source: Australian Communications Authority

< Wireless Equipment Menu >