|
 |
Easily/Quickly convert an ordinary Composite Video
CCTV Camera system to an IP based Network Monitoring
Recording system with 2-Way Audio Alarm I/O and RS485
control capabilities
J
Optional 5 ~ 18 dB Gain Antennas for increased Range
J
RS485 output for Pan Tilt Zoom control
PELCO™-D
protocol compatible software
J
Four Alarm Inputs One SPDT Relay Alarm Output
J
Two-Way Audio ideal for entry communication and access
control (using Alarm Output)
J
SD Card Port for Back-Up Recording if Network Fails
J
SMA female RF Antenna
output (2.4 GHz) for easy connection of Coax Cables &
High Gain Antennas to increase range
J
free 36
Channel Remote
Monitoring - Recording Software is compatible with
following members of this product family:
IP-DdnExAV *
IPw-TX *
IP-DdnAV *
IP-CSdnAV *
IPw-CSdnAV *
IPw-TX4 *
IP-CSHR *
IPw-CSProg *
IPw-CSdnProg
J
free:
SDK &
API for System Integrators & Software Developers
|
|
4 Channel Video
Network wired or wireless 688 H-Pixel Video Server /
Recorder with 2-Way Audio.
WEP 64 / 128-bit, WPA, PSK IEEE 802.11b/g .
RS485 output for external devices PTZF, etc,
PELCO™-D compatible.
Multi Camera Surveillance using free
36-channel software.
Real-Time 25/30 IPS Live Monitoring.
IE Browser Remote View 10 Simultaneous
users.
Two-Way Audio for direct communication /
intercom.
Web Cam using Internet Explorer Browser.
Remote Monitoring / Playback / Search /
Backup.
MPEG-4 codec with CBR/VBR to cater for
fast/slow & narrow/wide Bandwidth Networks.
Video Motion Detection 1 Area & 10
Sensitivity Levels each channel.
Free 36 Channel remote monitoring and recording software.
HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, 3GPP, UPnP.
FTP - e-mail - Dynamic Domain Name Server (DDNS)
capabilities.
SD
Card
Flash Memory Port for backup protects against
network failure.
Order Code:
[IPw-TX4] $549
$439 < 5 + >
ISO9001
Taiwan Quality
OPTIONS
[Mike]
Microphone & Preamplifier
$20
[REG12/1A]
Plug Pack Regulated 12 VDC 1 Amp
$20
[REG12-Auto
for 12 V Battery/Vehicle operation
$29
[Rect-Reg+]
Rectifier Regulator for long cable run, 24 vac power,
etc
[Cable-LANxo] Crossover LAN Cable
$10 (simplify initial setup)
Use existing
Composite Video Coaxial Cable for Network low cost easy
speedy analog-cctv to Network-CCTV conversion
more...
Combine this with a
Maxi Camera
and build a Customised Network Camera.
|
|
to view pages from IPw-TX4 Wired/Wireless Network AV Server
'User's Manual'
to view pages from free
36 Channel Network Camera Monitoring Recording Software
'User's Manual'
|
|
|
Network Protocol: HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, 3GPP, UPnP.
Remote Software: Free 36 Channel remote monitoring and
recording software.
Triggered Actions: Mail, FTP, Alarm Output,
Save to USB Stick/ThumbDrive.
Ethernet LAN / WAN Port 10/100 Base-T , RJ45
connector.
Firmware Upgrade: http mode, can be upgraded
remotely.
Web Browser Microsoft Internet Explorer 6.0 or
above.
Image Display Rate Full D1 Resolution PAL: 25
FPS.
Resolution: PAL 688 x 544, 336 x 272, 160 x
128.
Video Motion Detection (1 area per channel).
Security: Password Protection configurable.
Video Bitrate Adjustment: CBR, VBR.
Compression Format: MPEG4.
Users: Up to 10 simultaneous.
SDK: available for integration.
SD Card Backup Memory Port.
Full Screen Monitoring.
Video Format: AVI.
Video Playback.
Image Snapshot.
Audio 2 Way.
When used with
DomePTZ-dn1 |
DomePTZ-dn2 |
DomePTZ-dn3 |
100 Channel RS485 PELCO™-D
compatible Remote Pan / Tilt / Zoom / Focus / Auxiliary
Receiver |
AutoCam-dn Security Camera select
EP Pelco-D 2400 bps.
Made in Taiwan in an ISO 9001
certified factory.
Manufacturer's Experience: 18 +
Years.
Wireless
WEP 64 / 128-bit, WPA,
PSK IEEE 802.11b/g .
TX Output Power
typically: with Ant-W5dB Antenna, CCK 14 ~ 16 dBm (~ 30 mW),
OFDM 10 ~ 13 dBm (10 ~ 20 mW).
RX Sensitivity
typically: with Ant-W5dB Antenna, 11 Mbps <-84 dBm, 54
Mbps <-70 dBm.
SD Card Plug-In Memory management
Recording Trigger: Motion Detection, Alarm
Input, Network break down.
Video Playback: Yes.
Port: front Panel.
INPUT / OUTPUT
Video Input/Output: Four 1.14 V
p-p Composite Video 75 ohm inputs, Four 1.14 V p-p Composite
Video 75 ohm looping outputs, BNC socket.
Audio Input/Output: Line Level
input for
Microphone & Preamplifier, output for Amplified Speaker,
RCA socket.
Alarm: 4 x Inputs, 1 x
SPDT Outputs, Press-to-Release terminals.
NETWORK: Standard RJ45
8p8c socket.
RS485: Press-to-Release
terminals.
Radio Frequency:
Standard SMA socket, external thread, socket contact.
Power: 12 Volts DC Regulated, ~
mA, 2.1 x 5.5 mm DC socket, center pin = (+).
Dimensions: ~ x
x mm, ~ grams.
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones,
Wireless LAN, etc), Antenna Alignment, Electromagnetic &
Radio Frequency interference in the vicinity. This device may
be affected by and may affect other devices that operate on or
near the same frequency causing minor to severe interference.
In ideal, clear,
Line-of-Sight conditions with Ant-W5dB Antenna and
communicating with a device of same or higher Output &
Sensitivity
up to ~ 100 metres.
Correctly matched and aligned
24 dBi antenna on one device up to ~ 1000 metres.
Correctly matched and aligned
24 dBi antenna on both devices up to ~ 2000 metres.
Due to the nature of Radio Signals results are unpredictable
(in the same manner as Mobile / Cellular Telephones) signals
reflected from surrounding objects arriving at Receiver
antenna may Add-to or Subtract-from the direct signal from
Transmitter. Directional antennas may reduce affect of
reflected signals.
|
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on
either/or both devices. For maximum signal transfer both
antennas should be the same polarity, that is both oriented
Vertically or Horizontally.
|
 |
Cat
Code: Ant-Stub
$15
2.4 ~
2.5 GHz Whip Antenna, 0 ~ 3 dBi gain, ~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 52 mm. Diameter: ~ 9 mm. Weight: ~ 6 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-Whip
$20
Vertical Whip Antenna Omni
Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50 ohms
impedance. Antenna for Wireless LAN, WiFi Network, Wireless
ADSL, Video Transmitters, etc.
Length: ~ 107 mm
straight, ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11
grams.
SMA male
Connector.
|
 |
Cat Code:
Ant-W5dB
$20
Vertical Whip
Antenna non-directional 2.4 ~ 2.5 GHz,
~ 5 dBi gain, ~ 50 ohms
impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @
Top. Weight: ~ 30 grams.
SMA male Connector.
|
 |
Cat Code:
Ant-W12dB
$129
High Gain Vertical Whip
Antenna 2.4 ~ 2.5 GHz, ~ 12 dBi gain, ~ 50 ohms impedance.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 1210 mm,
~ 1425 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~
22 mm main center section ~ 24 mm top cap. Weight: ~ 670
grams ~ 930 grams with Mounting Tube & Clamp/Bracket.
Supplied with Base
Mount Tube and Clamps/Brackets for surface or Tubular Mast
mounting.
N female
Connector. <Adaptors &
Extension Cables>
|
 |
Cat Code: Ant-W15dB
$169
High Gain Vertical
Whip Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm
impedance. Beamwidth: Horizontal 360º, Vertical 11º. VSWR
(Voltage Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length: ~ 1640 mm, ~ 1935 mm with Base Mount Tube. Diameter:
~ 42 mm @ Base ~ 20 mm main center section ~ 22 mm top cap.
Weight: ~ 680 grams ~ 950 grams with Mounting Tube &
Clamp/Bracket.
data sheet
N female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Discontinued
Cat
Code: Ant-Y15
$79
Yagi
Antenna for Wireless LAN,
WiFi Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~
2.5 GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58
Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35
mm, ~ 680 grams.
Supplied with ~ 140 x 70 mm Aluminium mounting plate,
Clamps, etc. Pictured in Vertical Polarity orientation *
Mast not included.
SMA male Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y16C
$119
Yagi
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohms
impedance. Beamwidth: E28, H28.
Dimensions (excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~
750 grams, ~ 500 mm RG-58 Coax cable. Supplied with
Aluminium mounting plate, Clamps, etc. Pictured in Vertical
Polarity orientation * Mast not included.
SMA male Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y17.5C
$149
Yagi
Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~
800 grams, ~ 500 mm RG-58 Coax cable. Supplied with
Aluminium mounting plate, Clamps, etc. Pictured in Vertical
Polarity orientation * Mast not included.
SMA male Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-F16
$99
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi
gain, ~ 50 ohm impedance.
Beamwidth: ~ 27º (H) ~ 60º (V).
Supplied with versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast Clamps.
Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H)
~ 30 mm (D), ~ 740 grams.
Pictured in Vertical Polarity orientation
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code:
Ant-F18
$149
COMPACT Flat 2.3 ~
2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º
(H) ~ 75º (V). Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm
(D), ~ 950 grams.
Pictured in
Vertical Polarity orientation.
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code: Ant-F20
$179
Compact Flat 2.4 ~
2.5 GHz, ~ 20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30º
H90º. Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200
Watts. Antenna for Wireless LAN, WiFi Network, Wireless
ADSL, Video Transmitters, etc.
Supplied with 50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~
330 (H) ~ 40 mm (D). Weight ~ 1.65 kg including mounting
bracket. Tilt +/- ~ 20º.
Pictured in Vertical Polarity orientation.
data sheet
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat
Code: Ant-P10
$99
COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~
50 ohm impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied with Tubular Mast Clamp. Dimensions (excludes
Socket & Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235
grams.
Pictured in Vertical Polarity orientation.
SMA female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-P24
$199
Grid-Parabolic Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24
dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11º (H) ~ 7º (V).
Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with Clamps to suit 40 ~ 50 mm Tubular Mast,
bracket for Vertical or Horizontal mounting 60º Tilt in 10º
increments. Aluminium Grid (2 sections) ~ 1060 (W) ~ 600 (H)
mm assembled. Weight ~ 2.8 kg including mounting bracket.
Pictured in Horizontal Polarity orientation.
data sheet
N female Connector. <Adaptors
& Extension Cables>
|
Parabolic Yagi & Flat are
directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise 'Range' minimise
the length of Coax Cable between Antenna and device.
|
  |
Cat Code: SMA-REVm
$10
Conventional SMA (external
thread, socket contact) to Reverse Polarity SMA
connector (internal thread, socket contact, Hex Nut)
Center Socket
Contact on both ends (no Pins), converts
Reverse Polarity SMA to conventional SMA (use with Netcomm
NB9W, etc)
|
 |
Cat Code: SMA-REVf
$10
Conventional SMA
connector (internal thread, pin contact, Hex Nut) to
Reverse Polarity SMA connector (external thread, pin
contact)
Central Pin
Contact on both ends.
|
  |
Cat Code: SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut) to N
female. Suitable for P18G & P24G discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas.
|
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna.
|
 |
Cat
Code: Cable-178/30
$19
30 cm
RG-178 Coax cable with SMA male & female connectors.
|
 |
Cat
Code: Cable-58/450
$39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~
1.4 dB/metre @ 5.8 GHz
Cat
Code: Cable-23/450N
$39
not pictured
~ 450 cm Coax Cable with SMA & N male
connectors. Attenuation ~ 0.75 dB/metre @ 2.4
GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable
for W12dB, W15dB, F16, F18, F20 & P24 antennas.
|
Antenna Gain... what does it mean ??? a simplified
explanation
Received signal strength from an antenna with 3 dBi gain will
be double that from an antenna that has 0 dBi gain, received
signal strength from a 6 dBi will be double that from a 3 dBi
and so on... An increase in antenna gain of 3 dBi is
approximately equal to doubling the transmitter output,
received signal strength or range can be increased by raising
antenna gain or transmitter output. Range can be doubled by
either increasing antenna gain by 6 dBi or quadrupling the
transmitter output.
Increasing the gain of the receiver antenna is an alternative
to increasing transmitter output.
In very simple terms: increasing antenna gain
from 0 dBi to 3 dBi is equivalent to raising the output power
of a 10 mW transmitter to ~ 20 mW, (5 dBi to ~ 33 mW) (12 dBi
to ~ 160 mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
|
Air