|
 |
Easily/Quickly convert an ordinary CCTV Camera or any
Camera with Composite Video output to a IP Network
Camera with 2-Way Audio Alarm I/O and RS485 control
capabilities
J
Optional 5 ~ 18 dB Gain Antennas for increased Range
J
RS485 output for Pan Tilt Zoom control
PELCO™-D
protocol compatible software
J
Two Alarm Inputs Two SPDT Relay Alarm Outputs
J
Two-Way Audio ideal for entry communication and access
control (using Alarm Output)
J
SD Memory Card slot for Back-Up Recording if Network
Fails
J
SMA female RF Antenna
output (2.4 GHz) for easy connection of Coax Cables &
High Gain Antennas to increase range
J
free 36
Channel Remote
Monitoring - Recording Software is compatible with
following members of this product family:
IP-DdnExAV *
IPw-TX *
IP-DdnAV *
IP-CSdnAV *
IPw-CSdnAV *
IPw-TX4 *
IP-CSHR *
IPw-CSProg *
IPw-CSdnProg
J
free:
SDK &
API for System Integrators & Software Developers
|
|
Network wired or wireless 720
H-Pixel Video Server / Video Recorder with 2-Way Audio.
Easily
relocatable Network Surveillance System just connect to
Power.
WEP 64 /
128-bit, WPA, PSK IEEE 802.11b/g .
RS485
output for external devices PTZF, etc,
PELCO™-D compatible.
Multi
Camera Surveillance using free 36-channel software.
Real-Time
25/30 IPS Live Monitoring.
IE Browser
Remote View 10 Simultaneous users.
Two-Way
Audio for direct communication / intercom.
Web Cam
using Internet Explorer Browser.
Remote
Monitoring / Playback / Search / Backup.
Dual
streaming MPEG-4 / JPEG codec with adjustable
quality/compression to cater for fast/slow &
narrow/wide Bandwidth Networks.
Video
Motion Detection 3 Zones & 10 Sensitivity Levels.
Free 36
Channel remote monitoring and recording software.
HTTP, TCP/
IP, UDP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, 3GPP, UPnP.
FTP -
e-mail - Dynamic Domain Name Server (DDNS) capabilities.
SD Flash
Memory Card Slot for backup protects against network
failure.
Order Code: [IPw-TX]
$349
$279 < 5 + >
ISO9001
Taiwan Quality
OPTIONS
[Mike]
Microphone & Preamplifier
$20
[REG12/1A]
Plug Pack Regulated 12 VDC 1 Amp
$20
[REG12-Auto
for 12 V Battery/Vehicle operation
$29
[Rect-Reg+]
Rectifier Regulator for long cable run, 24 vac power,
etc
[Cable-LANxo] Crossover LAN Cable
$10 (simplify initial setup)
Use existing Composite Video
Coaxial Cable for Network low cost easy speedy analog-cctv
to Network-CCTV conversion
more...
Combine this with a
Maxi Camera
and build a Customised Network Camera.
|
|
JPEG Image from SD Card
JPEG Image Recorded to PC
* click on image to view full size *
Image Source Digital TV.
to view pages from IPw-TX Wired/Wireless Network AV Server
'User's Manual'
to view pages from free
36 Channel Network Camera Monitoring Recording Software
'User's Manual'
|
|
|
Network Protocol: HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, 3GPP, UPnP.
Remote Software: Free 36
Channel remote monitoring and recording software.
A/D Resolution: PAL 720 x 576 (D1) 352 x 288 (CIF) 176 x 144 (QCIF).
Triggered Actions: Mail, FTP, Alarm Output (1 or 2), Save to
SD card.
Backup SD Card 128 MB to 4 GB SanDisk or Transcend Card.
Ethernet LAN / WAN Port 10/100 Base-T , RJ45 connector.
Firmware Upgrade: http mode, can be upgraded remotely.
Web Browser Microsoft Internet Explorer 6.0 or above.
Image Display Rate Full D1 Resolution PAL: 25 FPS.
Compression Format Dual Mode: MPEG4 / MJPEG.
Security: Password Protection configurable.
Video Bitrate Adjustment: CBR, VBR.
Video Motion Detection (3 Areas).
Pre / Post Alarm: Configurable.
Users: Up to 10 simultaneous.
SDK: available for integration.
Video Format: AVI.
Full Screen Monitoring.
Video Playback.
Image Snapshot.
Audio 2 Way.
When used with
DomePTZ-dn1 |
DomePTZ-dn2 |
DomePTZ-dn3 |
100 Channel RS485 PELCO™-D
compatible Remote Pan / Tilt / Zoom / Focus / Auxiliary
Receiver |
AutoCam-dn Security Camera select
EP Pelco-D 2400 bps.
Made in Taiwan in an ISO 9001
certified factory.
Manufacturer's Experience: 18 +
Years.
Wireless
WEP 64 / 128-bit, WPA, PSK IEEE
802.11b/g .
TX Output Power typically:
with Ant-W5dB Antenna, CCK 14 ~ 16 dBm (~ 30 mW), OFDM 10 ~ 13
dBm (10 ~ 20 mW).
RX Sensitivity typically:
with Ant-W5dB Antenna, 11 Mbps <-84 dBm, 54 Mbps <-70 dBm.
SD card management
Recording Trigger: Motion Detection, Alarm
Input, Network break down.
Video Playback: Yes.
Card Slot: Front Panel.
Compatibility: 128 MB to 4 GB SanDisk or Transcend.
INPUT / OUTPUT
Video Input/Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket.
Audio Input/Output: Line Level
input for
Microphone & Preamplifier, output for Amplified Speaker,
RCA socket.
Alarm: 2 x Inputs, 2 x SPDT
Outputs, Press-to-Release terminals.
NETWORK: Standard RJ45 8p8c
socket.
RS485: Press-to-Release
terminals.
RS232: DB9 socket.
Radio Frequency: Standard SMA
socket, external thread, socket contact.
Power: 12 Volts DC Regulated, ~
350 mA, 2.1 x 5.5 mm DC socket, center pin = (+).
Dimensions: ~ 134 x
42 x 107 mm, ~ 440 grams.
Depends on Surroundings,
Obstructions, other Transmitters (2.4 GHz Cordless Phones,
Wireless LAN, etc), Antenna Alignment, Electromagnetic &
Radio Frequency interference in the vicinity. This device may
be affected by and may affect other devices that operate on or
near the same frequency causing minor to severe interference.
In ideal, clear, Line-of-Sight
conditions with Ant-W5dB Antenna and communicating with a
device of same or higher Output & Sensitivity
up to ~ 100 metres.
Correctly matched and aligned
18 dBi antenna on one device up to ~ 600 metres.
Correctly matched and aligned
18 dBi antenna on both devices up to ~ 1200 metres.
Due to the nature of Radio
Signals results are unpredictable (in the same manner as
Mobile / Cellular Telephones) signals reflected from
surrounding objects arriving at Receiver antenna may Add-to or
Subtract-from the direct signal from Transmitter. Directional
antennas may reduce affect of reflected signals.
|
Range and Signal to Noise Ratio
(SNR) may be improved by increasing gain of antenna on
either/or both devices. For maximum signal transfer both
antennas should be the same polarity, that is both oriented
Vertically or Horizontally.
|
 |
Cat Code:
Ant-W5dB
$20
~ 5 dBi gain, ~ 50
ohms impedance.
Length: ~ 195 mm straight
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @
Top. Weight: ~ 30 grams.
SMA male Connector. |
 |
Cat Code:
Ant-W12dB
$129 ~ 12 dBi gain,
~ 50 ohms impedance.
Length: ~ 1210 mm ~ 1425
mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 22 mm
main center section ~ 24 mm top cap. Weight: ~ 670 grams ~
930 grams with Mounting Tube & Clamps/Brackets.
Supplied with Base Mount
Tube and Clamps/Brackets for surface or Tubular Mast
mounting. N female Connector. <Adaptors
& Extension Cables> |
 |
Cat
Code: Ant-Y8
$69
Discontinued
Yagi ~ 8 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-142 Coax cable.
Dimensions (excluding Clamps) ~ 290 x 95 x 35 mm, ~ 530
grams.
Cat
Code: Ant-Y12
$89
Discontinued
Yagi ~ 12 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~
430 x 95 x 35 mm, ~ 600 grams.
Cat Code:
Ant-Y15 $79
Yagi ~ 15 dBi gain, ~ 50 ohms impedance.
~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~
650 x 95 x 35 mm, ~ 680 grams.
Common
Specifications: 2.4 ~ 2.5 GHz Dipole. Supplied with ~
140 x 70 mm Aluminium mounting plate, Clamps, etc. Pictured
in Vertical Polarity orientation * Mast not included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-Y16C
$119
Yagi 2.4 ~
2.5 GHz, ~ 16 dBi gain, ~ 50 ohms impedance. Beamwidth: E28,
H28.
Dimensions
(excluding Clamps) ~ 650 mm, ~ 75 mm diameter, ~ 750 grams,
~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting
plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-Y17.5C
$149
Yagi Antenna
2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24.
Dimensions
(excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams,
~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting
plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA
male Connector. <Adaptors &
Extension Cables> |
 |
Cat Code:
Ant-F16
$99
COMPACT Flat
2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance.
Beamwidth: ~
27º (H) ~ 60º (V).
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions
(excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm
(D), ~ 740 grams.
Pictured in
Vertical Polarity orientation
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-F18
$149
COMPACT Flat 2.3 ~ 2.5
GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º (H)
~ 75º (V).
Supplied with versatile
selection of mounting hardware for Wall/Ceiling mounting &
two Tubular Mast Clamps.
Dimensions (excludes
Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950
grams.
Pictured in Vertical
Polarity orientation.
N female Connector.
<Adaptors & Extension Cables> |
 |
Cat Code:
Ant-P10
$99
COMPACT
Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm
impedance. Beamwidth: ~ 30º (H) ~ 60º (V).
Supplied with
Tubular Mast Clamp. Dimensions (excludes Socket & Brackets)
~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Pictured in
Vertical Polarity orientation.
SMA
female Connector. <Adaptors &
Extension Cables> |
Parabolic Yagi & Flat are
directional antennas. Whip antennas when used vertically
are for most practical purposes omni or non directional.
To maximise 'Range' minimise
the length of Coax Cable between Antenna and device.
|
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, F16 & F18 antennas. |
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna. |
  |
Cat Code: SMA-REVm
$10
Conventional SMA (external
thread, socket contact) to Reverse Polarity SMA
connector (internal thread, socket contact, Hex Nut)
Center Socket Contact
on both ends (no Pins), converts
Reverse Polarity SMA to conventional SMA (use with Netcomm
NB9W, etc) |
 |
Cat Code:
Cable-178/30 $19
30 cm RG-178
Coax cable with SMA male & female connectors. |
 |
Cat Code:
Cable-58/450 $39
~ 450 cm Coax Cable
with SMA male & female connectors. Attenuation 0.6 ~ 0.9
dB/metre @ 2 GHz.
Cat Code:
Cable-23/450N $39
not pictured
~ 450 cm
Coax Cable with SMA & N male connectors.
Attenuation ~ 0.75 dB/metre @ 2 GHz. Suitable
for W12dB, F16 & F18 antennas. |
Antenna Gain... what does it mean ??? a simplified
explanation
Received
signal strength from an antenna with 3 dBi gain will be double
that from an antenna that has 0 dBi gain, received signal
strength from a 6 dBi will be double that from a 3 dBi and so
on... An increase in antenna gain of 3 dBi is approximately
equal to doubling the transmitter output, received signal
strength or range can be increased by raising antenna gain or
transmitter output. Range can be doubled by either increasing
antenna gain by 6 dBi or quadrupling the transmitter output.
Increasing
the gain of the receiver antenna is an alternative to
increasing transmitter output.
In very simple terms: increasing antenna gain
from 0 dBi to 3 dBi is equivalent to raising the output power
of a 10 mW transmitter to ~ 20 mW, (5 dBi to ~ 33 mW) (12 dBi
to ~ 160 mW) (15 dBi to ~ 320 mW) (18 dBi to ~ 640 mW)
|
|
|
Air