Quad Screen alternating Screen processor

CCTV Quad Screen Processor: Suitable for all CCTV Video Surveillance Cameras in this catalogue. Connect Eight Video Cameras (or other Video Sources) to Digital Quad Processor which performs an Analog to Digital conversion on signals from each input then digitally constructs two alternating Quad Screen images that are output as a standard 75 ohm 1 v p-p Composite Video signal. Monitor Output for live viewing may be alternating Quad Screen Images, Sequentially Switching Images or any Manually Selected input channel. Alarm inputs, Recover input and Alarm output may be used to control a VCR for 'Event-Only' recording and/or for multiple Remote Monitoring Consoles that allow selection of any Channel or Alternating Quad Screen Images during live viewing. Audible Video Loss and Alarm buzzers alert user to intrusion and/or interference with Camera video or power supply wiring. Log record of Alarm and Video Loss events. Alarm period is programmable and may be used to control VCR recording period. RS232 interface for remote control using a PC

QUAD-BW 501 Quad Screen alternating Screen processor

8 CAMERA 2 PAGE QUAD * Time/Date/Title * Alarm Event Log * Video Loss Detection * Alarm I/O * Security Lock * RS-232 Remote Control

$389 (A)
$449 (B)

Security Camera Power Supplies Mains Plug Pack $14

GoVideo Plug Pack & WARRANTY EXTENSION to 2 YEARS + $30
2 YEAR WARRANTY
when purchased & used with GoVideo Plug Pack

Quad CCTV alternating Screen processor   Quad Screen CCTV processor
Output to Monitor: Alternating Quad Screens, A or B Quad Screen, Full Screen or Sequentially Switching.

Quad alternating Screen processor

Quad Screen processor

CCTV Quad Screen processor

8 CAMERA - 2 PAGE
DIGITAL DUO QUAD PROCESSOR NEAR SUPER-VHS IMAGE QUALITY
Time / Date / Title
25 fields per second input sampling rate, 50 fields per second output.
8 bit Analog to Digital Conversion, 256 level Grey Scale.
Video Loss Detection with Audible Alarm and Time/Date Log entry.
A/B or 1, 2, 3, 4, 5, 6, 7, 8 Automatic Switching Modes 1-99 second Dwell.
Log of Alarm and Video Loss Events.
Security Lock.
RS-232 Remote Control Interface.
On-Screen Set-Up Menu.
Video Camera Inputs: 8 Standard CCIR Composite Video with Gain Controls.
VCR Video Output: Alternating Quad Screens  ~ 2 second Dwell (* except when Screen A or Screen B is selected during live monitoring).
Video Monitor Output: Automatic Sequential 1, 2, 3, 4, 5, 6, 7, 8, Alternating A/B Screens, Manual Selection of any Camera, Screen * A or Screen * B (* not recommended during recording).
8 Normally Open Alarm Inputs, 1 NO Recover Input.
SPDTAlarm Output 1 - 999 second adjustable.
12 Volts DC, ~ 7 Watts, 2.1 mm 5.5 mm socket.
Input / Output: RS-232 & Alarm via 25 pin D-Sub sockets, Video via BNC.
430 mm (W) 50 mm (H) 248 mm (D), 2.5 kg.

Use a low-cost domestic VCR and our 'VCR Controller' for 'Event-Only' recording, 12 ~ 15 Hours Real-Time click here for details.

CCTV made in Taiwan

Manufacturer's Experience: 18 + YEARS in Electronics * 10 + YEARS with QUADS

Plug-In DIY AV 20 metre Cable / Adaptor Set: 20 metre AV Cable with moulded Plugs & Socket. Two RCA Plugs & DC Plug for Camera end. Two RCA Plugs for input device, DC Socket for Plug-Pack. Two BNC-RCA Adaptors for Camera, VCR, Quad, Switcher, Multiplexer, Monitor, Transmitter, etc.

20 metre AV Cable BNC Plug to RCA Socket

Use your PC as a DIGITAL VIDEO & AUDIO RECORDER

Monitor - another solution

Video - VGA converter

TINY VIDEO & AUDIO TRANSMITTER sub-Matchbox size

VIDEO/AUDIO TRANSMITTER & RECEIVER wireless link

 

with 1.5m Cable & Adaptors: + $8
BNC - RCA Adaptor * RCA Socket to BNC Plug
Twin RCA to RCA Plug CableBNC - RCA Adaptor * RCA Socket to BNC Plug
Dual 1.5 m Cable with two RCA Plugs each end, supplied with two BNC-RCA Adaptors for interconnecting: Quad / Multiplexer / Monitor / VCR etc.

2 YEAR WARRANTY
when purchased & used with GoVideo Plug Pack

<Security Camera Pack> <Security Camera Application Notes>