Covert CCTV Camera

Covert CCTV Camera

MOD-C88P Pinhole PCB Module Colour Camera with 5.5 mm PINHOLE Lens & " LOW BLEMISH Panasonic CCD. Optional: ATW/FIX * ATW/AWC * Mirror * 2X Digital Zoom.

Suitable for CCTV Recorders and average levels of illumination in Homes, Shops, Showrooms, Offices, Warehouses, etc.

Function Select Jumper Plug & Wires: + $10 (Electronic Knowledge, Skills & Care are required to use this item)
Microphone & Preamplifier better pick up than most inbuilt microphones $20
REG12/0.3A Regulated 12 VDC 0.3 Amp Plug Pack to suit $12
Mounting Hardware Screw/Nut/Spacer/Bush Paks
Cable-AVP DIY Audio & Video 20 metre Cable $30 - wires need to be cut & soldered.
BNC-RCA Adaptor use with Cable-20m above $2

No optional Lenses for this Camera

All values are approximate.

@ 3 m @ 5 m @ 9 m @ 15 m

Width of Vision with 5.5 mm Lens

1.9 m 3.3 m 5.9 m 9.8 m


0.9 m 1.6 m 2.9 m 4.9 m

Additional Security Camera Lens


Video System: PAL fully compatible with Australian TV System.

542 (H) x 586 (V) 317 612 Pixel inch LOW BLEMISH Panasonic Interline Transfer CCD.

Lens: Pinhole Type 5.5 mm Focal Length, there are no Accessory Lenses for this Camera, CCTV Lens.

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, via ~ 100 mm wires.

Horizontal Pixels: 500 + (this value is provided for comparative purposes only) Better than VHS * Near Super-VHS resolution.

Sensitivity: ~ 0.5 lux @ F1.2 (this value is provided for comparative purposes only).

Spectral Sensitivity: ~ 400 to ~ 700 nm.

Automatic Electronic Shutter (AES): 1/50 to 1/120 000 second, 20 milliseconds to 8.33 microseconds.

Signal to Noise ratio: Typically 60 dB, minimum 52 dB, measured with AGC off.

Automatic Gain Control (AGC): Yes.

White Balance: ATW / AWC / FIX (zero colour rolling), optional Function Jumper required.

White Balance Range: AWB / AWC (3200 ~ 10 000 degrees Kelvin) / FIX (3200 degrees Kelvin), optional Function Jumper required.

Digital Zoom: 2 X, optional Function Jumper required.

Mirror Image: Optional Function Jumper required.

Power Requirements: 12 Volts DC Regulated, ~ 90 milliamps, via ~ 100 mm wires.

Dimensions: ~ 32 Wide, ~ 32 mm High, ~ 20 mm Deep with 5.5 mm Lens, ~ 12 grams. Mounting Hardware Screw/Nut/Spacer/Bush Paks

Made by Taiwan's largest Camera maker in an ISO 9001 & ISO-14001 certified factory.

Manufacturer's Experience: 23 + Years.

Need Sound security microphone

PINHOLE CCD Colour Digital Signal Processing CCTV Video Surveillance Camera PCB Module with Panasonic CCD and ATW/FIX * ATW/AWB * Mirror * 2X Zoom Functions, connect to 12 VDC & Composite Video AV input on TVs, VCRs, Capture Cards, etc. 1/4 inch LOW BLEMISH CCD Image Sensor, Digital Signal Processing, suitable for well lit areas in Homes, Offices, Showrooms etc. For: Covert - Discreet CCTV Video Surveillance Observation, Security & many other Closed Circuit Television applications including image capture, machine vision, Web-Cams, inspection, Rear Vision automotive CCTV and general surveillance. Use CCTV - TV / VCR Interface Module connected to TV antenna system for viewing / recording on all TVs and VCRs. Use our PC Digital Video Recording Systems for High Resolution image capture with Motion Detection, Masking, Dial-Up, Paging, LAN & other facilities.