**High Gain Wireless Network * Wi Fi Antennas * 2.4 GHz & 5.8 GHz Antennas * Extension Coax Cables * SMA N TNC Adaptors**

Range and Signal to Noise Ratio (SNR) may be improved by increasing Antenna Gain on Receiver &/or Transmitter. For maximum signal transfer TX and RX antennas should be the same polarity, that is both oriented Vertically or Horizontally.

Parabolic, Yagi & Flat Panel are directional antennas. Whip antennas when used vertically are for most practical purposes omni or non directional.

To maximise 'Range' minimise the length of Coax Cable between Antenna and Transmitter and Receiver.

Home Page * View Cart

SMA-REVm $1 Conventional SMA (external thread, socket contact) to Reverse Polarity SMA connector (internal thread, socket contact, Hex Nut) Center Socket Contact on both ends (no Pins), converts Reverse Polarity SMA to conventional SMA (use with Netcomm NB9W, etc)
SMAm-Nf $1 SMA male (internal thread, pin contact, Hex Nut) to N female. Suitable for P18G & P24G discontinued antennas.
SMAm-Nm $1 SMA male (internal thread, pin contact, Hex Nut) to N male. Suitable for W12dB, W15dB, F16, F18, F20 & P24 antennas.
SMAm-m $1 SMA male (internal thread, pin contact, Hex Nut) to SMA male. Suitable for P10 antenna.
Cable-178/30 $9 30 cm RG-178 Coax cable with SMA male & female connectors.
Cable-58/450 $39 ~~~ 450 cm Coax Cable with SMA male & female connectors. Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~ 1.4 dB/metre @ 5.8 GHz~~ Cable-23/450N $39 *not pictured* ~ 450 cm Coax Cable with SMA & N male connectors. Attenuation ~ 0.75 dB/metre @ 2.4 GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable for W12dB, W15dB, F16, F18, F20 & P24 antennas.
Cable-58/300 $19 ~ 300 cm Coax Cable with Reverse-Polarity SMA male & female connectors.

Ant-SMB $1 SMB 2.4 ~ 2.5 GHz Antenna, ~ 3 dBi gain, ~ 50 ohms impedance. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Length: ~ 62 mm. Diameter: ~ 6 mm. Weight: ~ 2 grams. Pictured with discontinued TX-MOD3, suits TX-CAM2p, TX-CAM2, TX-BNC SMB Connector (socket center contact)
Ant-Whip $2 Vertical Whip Antenna Omni Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50 ohms impedance. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Length: ~ 107 mm straight, ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11 grams. SMA male Connector.
Ant-W5dB $2 Vertical Whip Antenna non-directional 2.4 ~ 2.5 GHz, ~ 5 dBi gain, ~ 50 ohms impedance. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Length: ~ 195 mm straight, ~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight: ~ 30 grams. SMA male Connector.	White or Black Colour depending on stocks
Ant5dBi5.8GHz $20 Vertical Whip Antenna non-directional 5.8 GHz, ~ 5 dBi gain, ~ 50 ohms impedance. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Length: ~ 195 mm straight, ~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top. Weight: ~ 30 grams. Reverse-Polarity SMA male Connector. <Adaptors & Extension Cables>	White Colour stocked
Ant-W9dB $9 2.4 GHz /5.8 GHz High Gain Dipole Whip Antenna dual Band 2.4/5.8 GHz, ~ 9 dBi gain, ~ 50 ohm impedance. Antenna for Wireless LAN, WiFi (802.11 abg) Network, Wireless ADSL, Video Transmitters, etc. Length (mm): ~ 375 straight, ~ 355 folded. Diameters: ~ 13, ~ 16, ~ 6 mm @ Top. Weight: ~ 44 grams. Reverse-Polarity SMA male Connector. <Adaptors & Extension Cables>	click image to enlarge
Ant-P10 $19 COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 30� (H) ~ 60� (V). Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Supplied with Tubular Mast Clamp. Dimensions (excludes Socket & Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams. Suitable for Indoor and sheltered Outdoor use under eaves, etc Pictured in Vertical Polarity orientation. SMA female Connector. <Adaptors & Extension Cables>
Ant-W15dB $39 High Gain Vertical Whip Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm impedance. Beamwidth: Horizontal 360�, Vertical 11�. VSWR (Voltage Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Length: ~ 1640 mm, ~ 1935 mm with Base Mount Tube. Diameter: ~ 42 mm @ Base ~ 20 mm main center section ~ 22 mm top cap. Weight: ~ 680 grams ~ 950 grams with Mounting Tube & Clamp/Bracket. data sheet N female Connector. <Adaptors & Extension Cables>
~~Cat Code: Ant-Y8 $69~~ Discontinued ~~Cat Code: Ant-Y12 $89~~ Discontinued Ant-Y15 $19 Yagi Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35 mm, ~ 680 grams. Supplied with ~ 140 x 70 mm Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included. SMA male Connector. <Adaptors & Extension Cables>
Ant-Y17.5C $19 Yagi Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance. Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~ 800 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium mounting plate, Clamps, etc. Pictured in Vertical Polarity orientation * Mast not included. SMA male Connector. <Adaptors & Extension Cables>
Ant-F16 $19 Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 27� (H) ~ 60� (V). Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps. Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~ 30 mm (D), ~ 740 grams. Suitable for Indoor and sheltered Outdoor use under eaves, etc Pictured in Vertical Polarity orientation N female Connector. <Adaptors & Extension Cables>
Ant-F18 $29 COMPACT Flat 2.3 ~ 2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45� (H) ~ 75� (V). Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. Supplied with versatile selection of mounting hardware for Wall/Ceiling mounting & two Tubular Mast Clamps. Dimensions (excludes Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950 grams. Suitable for Indoor and sheltered Outdoor use under eaves, etc Pictured in Vertical Polarity orientation. N female Connector. <Adaptors & Extension Cables>
Ant-F20 $109 Compact Flat 2.4 ~ 2.5 GHz, ~ 20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30� H90�. Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200 Watts. Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. ~~Supplied with 50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~ 330 (H) ~ 40 mm (D). Weight ~ 1.65 kg including mounting bracket. Tilt +/- ~ 20�.~~ ~~Suitable for Indoor and sheltered Outdoor use under eaves, etc~~ ~~Pictured in Vertical Polarity orientation. data sheet~~ N female Connector. <Adaptors & Extension Cables>
AntF20-5.8GHz $119 High Gain Flat Panel 5.8 GHz Antenna, ~ 20 dBi gain, ~ 50 ohm impedance. Antenna for Wireless LAN, WiFi (802.11 a) Network, Wireless ADSL, Video Transmitters, etc. ~~Supplied with two 25~45 mm Tubular Mast Clamps. Panel ~ 260 (W) ~ 360 (H) ~ 40 mm (D). Weight ~ 960 grams excluding Clamps.~~ ~~Suitable for Indoor and sheltered Outdoor use under eaves, etc~~ N female Connector. <Adaptors & Extension Cables>
Ant-P24 $199 Grid-Parabolic Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11� (H) ~ 7� (V). Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100 Watts. Supplied with Clamps to suit 40 ~ 50 mm Tubular Mast, bracket for Vertical or Horizontal mounting 60� Tilt in 10� increments. Aluminium Grid (2 sections) ~ 1060 (W) ~ 600 (H) mm assembled. Weight ~ 2.8 kg including mounting bracket. ~~Pictured in Horizontal Polarity orientation. data sheet~~ N female Connector. <Adaptors & Extension Cables>

Antenna Gain... what does it mean ??? a simplified explanation

Received signal strength from an antenna with 3 dBi gain will be double that from an antenna that has 0 dBi gain, received signal strength from a 6 dBi will be double that from a 3 dBi and so on... An increase in antenna gain of 3 dBi is approximately equal to doubling the transmitter output, received signal strength or range can be increased by raising antenna gain or transmitter output. Range can be doubled by either increasing antenna gain by 6 dBi or quadrupling the transmitter output power.

Increasing the gain of the Receiver or Transmitter Antenna is an alternative to increasing transmitter output.
In very simple terms: increasing antenna gain from 0 dBi to 3 dBi is equivalent to raising the output power of a 1 Watt transmitter to ~ 2 Watts (5 dBi to ~ 3.3 Watts) (12 dBi to ~ 16 Watts) (15 dBi to ~ 32 Watts) (18 dBi to ~ 64 Watts) (24 dBi to ~128 Watts)

Due to the nature of Radio Signals results are unpredictable signals reflected from surrounding objects arriving at Receiver antenna may Add-to or Subtract-from the direct signal from Transmitter. Directional antennas may reduce affect of reflected signals.

* LIPD = Low Interference Potential Devices * EIRP = Equivalent Isotropically Radiated Power. Source

High Gain Network Antennas 2.4 GHz Antenna Extend Wireless Network Range 24 dBi Gain Coax Cables Adaptors Reverse Polarity SMA N SMA SMA Extension Cables Flat Panel Antennas Yagi Parabolic Whip Directional Wireless Local Area Network 2.4 GHz Antennas Extend Wi-Fi Range Increase Wireless Range up to 24 Gain Cables Adaptors Reverse Polarity SMA N SMA to SMA Extension Coaxi Cables Compact Flat Antennas Yagi Parabolic Whip