A BETTER SOLUTION
View 100% !
Accurately with less Distortion !
steadier images with negligible flicker with Line-Doubling !
signals and converts to 50, 60 or 75 Hz Progressive Scan to suit
LCD VGA Monitors !
Monitors and Televisions are generally more expensive than PC
Monitors and the images they produce suffer from many
Distortion (poor linearity)
Low Resolution, lack sharpness and detail
Over Scan (you lose up to 15% of the image)
Poor overall convergence
In contrast, the cheapest
Computer VGA Monitor will generally produce images with
Linearity (geometrically more
Bandwidth and Resolution (sharpness and detail)
Zero Overscan (see 100% of the width and height of images)
Convergence (more accurate from edge to edge and in corners)
This VIDEO TO VGA MONITOR
converter will convert all Composite and S-Video (Y/C) video
signals into a non-interlaced VGA signal for display on most
progressive scan PC CRT / LCD Monitors, Plasma Displays & LCD
On-Screen-Display function and
Remote Control allows this user-friendly unit to be easily
connected to a VGA Computer Monitor and almost any Video Source
such as Digital Video Recorder, CCTV Video Surveillance Camera,
Quad Processor, Multiplexer, Switcher, VCR, DVD player, TV,
Video Game Machines, etc, without any software installation,
just plug-in and view.
An existing Computer System
Monitor can be shared between Surveillance Monitoring and usual
Computer purposes at the press of a button.
Ideal for display of 100% of
Quad & Multi-Split Screen images, with an ordinary TV or Video
Monitor, eight 'sides' of a Quad image may be cropped and lost
due to Over-Scan.
100% seen on VGA Monitor
90% seen on TV / Video
10% lost on TV / Video
typically 5% ~ 15% on an ordinary TV or Video Monitor, above
representation is 10%.
3:2 Pulldown conversion for
2:2 Pulldown graphic mode.
3D Motion-Adaptive inter-field de-interlacing.
Sports & Static Picture Modes.
Excellent video quality with negligible flicker compared to an
ordinary Video Monitor or TV. Plug-in and View installation, no
software or PC required.
Inputs: Composite VIDEO (RCA
female), Y/C (S-VIDEO) (4 pin female), VGA (HD15 female), AUDIO
Line Level (3.5 mm female & 2 x RCA female).
Outputs: VGA monitor (HD15
female) & AUDIO Line Level (3.5 mm female).
Compatible with: PAL BGHI /
NTSC M, NTSC 4.43 (50Hz) / PAL 4.43 (60Hz), PAL N / NTSC 4.43
(60Hz), NTSC N / PAL M and SECAM TV systems, not suitable
for EIA / CCIR monochrome signals. This device takes a
moment to recognise input signal and is therefore not suitable
for discontinuous signals such as those from an unsynchronised
Computer VGA output to VGA
monitor output (pass-through) PC = 640x480 60/75 Hz,
800x600 60/75 Hz, 1024x768 60/75 Hz, 1280x1024 60/75 Hz,
1440x900 60/75 Hz, 1680x1050 60/75 Hz, 1920x1080 60 Hz.
VGA output 800x600 with 50 Hz
input, 640x480 with 60 Hz input.
VGA output 1024x768, 1280x1024, 1440x900, 1680x1050 when using
50 Hz to 60/75 Hz conversion or 60 Hz to 75 Hz conversion.
VGA output 1920x1080 when
using 50 Hz to 60 Hz conversion or with 60 Hz input.
Picture on/in Picture (PoP,
PiP) function VGA output 640x480 60/75Hz,
800x600 60/75Hz, 1024x768 60/75Hz, 1280x1024 60/75Hz, 1440x900
60, 1680x1050 60Hz.
PAL 50 Hz input conversion to
progressive scan VGA @ 60 Hz or 75 Hz
depending on resolution.
SECAM 50 Hz input conversion to progressive scan VGA @ 60 Hz or
75 Hz depending on
NTSC 60 Hz input conversion to progressive scan VGA @ 60 or 75
Hz depending on resolution.
On Screen Display (OSD)
Picture on/in Picture (PoP, PiP)
22 Key Remote Control (included)
Power Supply (included): 12 VDC Regulated 1.5 Amp, 2.1 x 5.5 mm
DC Plug/Socket, center = (+).
Minimum system requirement
No specific or any PC system
VESA VGA compatible monitor, HSync 31.25kHz & VSync 50Hz
(PAL) AUSTRALIA or HSync 31.5kHz and VSync 60Hz with PAL
signals using 50 Hz (PAL) to 60 Hz conversion.
Video input device: e.g.
Camera, Quad, Multiplexer, Switcher, Video Sender Receiver,
Video Wireless Receiver, VCR, DVD Player, TV, Game Machine or
any other standard Composite Video or S-Video Y/C source.
Other advantages of using
a PC Monitor
It may be possible to use PC
Monitor in standby power saving mode ready to instantly display
Warranty period is often Three Years.
Often supplied with Swivel and Tilt base.