|
A BETTER
SOLUTION !
View 100%
!
View
Sharper Images !
View
Images Accurately with less Distortion !
View
steadier images with negligible flicker with Line-Doubling !
De-Interlaces PAL signals and converts to 50, 60 or 75 Hz
Progressive Scan to suit LCD VGA Monitors !
Ordinary
Video Monitors and Televisions are generally more expensive than
PC Monitors and the images they produce suffer from many
shortcomings:
Flicker
Distortion (poor linearity)
Low Resolution, lack sharpness and detail
Over Scan (you lose up to 15% of the image)
Poor overall convergence
In contrast, the
cheapest Computer VGA Monitor will generally produce images with
considerably better:
Linearity
(geometrically more accurate)
Bandwidth and Resolution (sharpness and detail)
Zero Overscan (see 100% of the width and height of images)
Convergence (more accurate from edge to edge and in corners)
This VIDEO TO VGA
MONITOR converter will convert all Composite and S-Video (Y/C)
video signals into a non-interlaced VGA signal for display on
most progressive scan PC CRT / LCD Monitors, Plasma Displays &
LCD Projectors.
On-Screen-Display
function and Remote Control allows this user-friendly unit to be
easily connected to a VGA Computer Monitor and almost any Video
Source such as Digital Video Recorder, CCTV Video Surveillance
Camera, Quad Processor, Multiplexer, Switcher, VCR, DVD player,
TV, Video Game Machines, etc, without any software installation,
just plug-in and view.
An existing Computer
System Monitor can be shared between Surveillance Monitoring and
usual Computer purposes at the press of a button.
Ideal for display of
100% of Quad & Multi-Split Screen images, with an ordinary TV or
Video Monitor, eight 'sides' of a Quad image may be cropped and
lost due to Over-Scan.
 |
 |
 |
100% seen on VGA Monitor |
90% seen on TV / Video
Monitor |
10% lost on TV / Video
Monitor |
Over-Scan is typically 5% ~ 15% on an ordinary TV or Video
Monitor, above representation is 10%.
Specifications:
3:2 Pulldown
conversion for film mode.
2:2 Pulldown graphic mode.
3D Motion-Adaptive inter-field de-interlacing.
Sports & Static Picture Modes.
Excellent video quality with negligible flicker compared to an
ordinary Video Monitor or TV.
Plug-in and View installation, no software or PC required.
Inputs: Composite
VIDEO (RCA female), Y/C (S-VIDEO) (4 pin female), VGA (HD15
female), AUDIO Line Level (3.5 mm female & 2 x RCA female).
Outputs: VGA monitor (HD15 female) & AUDIO Line Level (3.5 mm
female).
Compatible with: PAL
BGHI / NTSC M, NTSC 4.43 (50Hz) / PAL 4.43 (60Hz), PAL N / NTSC
4.43 (60Hz), NTSC N / PAL M and SECAM TV systems, not
suitable for EIA / CCIR monochrome signals. This device
takes a moment to recognise input signal and is therefore not
suitable for discontinuous signals such as those from an
unsynchronised Switcher, etc.
Computer VGA output to
VGA monitor output (pass-through) PC = 640x480
60/72/75/85 Hz, 800x600 56/60/72/75 Hz, 1024x768 60/75 Hz,
1280x1024 60 Hz. MAC = 512x384 70 Hz, 640x480 66/85 Hz.
VGA output 800x600 with 50 Hz input, 640x480 with 60 Hz input.
VGA output 1024x768, 1280x1024 when using 50 Hz to 60/75 Hz
conversion or 60 Hz to 75 Hz conversion.
PAL 50 Hz input conversion to progressive scan VGA @ 50 Hz, 60
Hz or 75 Hz vertical rate.
SECAM 50 Hz input conversion to progressive scan VGA @ 50 Hz, 60
Hz or 75 Hz vertical rate.
NTSC 60 Hz input conversion to progressive scan VGA @ 75 Hz
vertical rate.
On Screen Display (OSD)
function.
14 Key Remote Control.
Power Requirements: 6 ~ 8 Volts DC unregulated, ~ 600 mA via 2.1
x 5 mm DC socket, center = (+). Australian/NZ 6 VDC
unregulated 800 mA Plug Pack included.
Minimum system
requirement
No specific or any PC
system required.
VESA VGA compatible monitor, HSync 31.25kHz & VSync 50Hz
(PAL) AUSTRALIA or HSync 31.5kHz and VSync 60Hz with PAL
signals using 50 Hz (PAL) to 60 Hz conversion. WHEN USING
FREQUENCY CONVERSION THIS UNIT IS COMPATIBLE WITH MOST PC VGA
MONITORS MANUFACTURED THIS MILLENNIUM.
Video input device:
e.g. Camera, Quad, Multiplexer, Switcher, Video Sender Receiver,
Video Wireless Receiver, VCR, DVD Player, TV, Game Machine or
any other standard Composite Video or S-Video Y/C source.
Other advantages
of using a PC Monitor
It may be possible to
use PC Monitor in standby power saving mode ready to instantly
display images using Remote Control.
Warranty period is often Three Years compared to One for Video
Monitors and TVs.
Usually supplied with a convenient Swivel and Tilt base.
|
