Security system Surveillance Monitor

RearView-M4.5 Security system Surveillance Monitor

Rear Vision 4.5" Security system Monitor & Waterproof Camera for Rear Vision or Observation / Inspection Systems in: Automobiles - Tractors - Buses - Cranes - Dozers - Boats - Aircraft - Trains - Harvesters and other machinery and equipment used in the Agricultural, Mining, Earthmoving, Transport and other industries.

$459 (A) Incl Tax
$499 (B) Incl T
ax

Monitor pictured with "Tinted Visor", "Sunshield & "Mounting Bracket".
Monitor displays Reverse (Mirror) Image.

CAMERA:

Sensor: 1/3 inch Charge Coupled Device (CCD)
Elements: 512 (H) x 582 (V).
Resolution: ~ 480 Horizontal Lines.
Sensitivity: ~ 0.5 lux @ F1.2
Automatic Electronic Shutter: 1/50 ~ 1/100 000 second
Output: Standard CCIR 75 ohm Composite Video via 5 pin 180 DIN Plug on ~ 500 mm cable.
Lens: 2.9 mm Focal Length, F2.0

Approximate Width of Vision:

@ 1 metre @ 3 metres @ 4 metres @ 5 metres

2.9 mm Lens

1.65 metres 4.96 metres 6.62 metres 8.3 metres

Power Requirements:
12 Volts DC Regulated (from Monitor) via 5 pin 180 DIN Plug on ~ 500 mm cable.

Dimensions:
25 mm diameter, ~ 53 mm long, ~ 80 grams including cable & plug.

Other:
Waterproof Housing: Aluminium, Black anodised, threaded full length from ~ 10 mm behind Front Flange, 1/4" UNC tapped thread centrally located at end.

Supplied with:
Seven Spacers & Angled Rings, Two knurled Ring Nuts & Rubber Seal Ring to mount & Aim camera. Cable ~ 20 metres with 5 pin 180 DIN Plug & Socket for Monitor & Camera.

 

Pictured without "Tinted Visor", "Sunshield" or "Mounting Bracket".

MONITOR:

Display Type:
CRT 4.5 inch, Reverse (Mirror) Image.
Resolution: ~ 500 Horizontal Lines (@ center)
Sensitivity: ~ 0.5 to 2.0 v p-p, Negative Sync

Inputs:
Standard CCIR 75 ohm Composite Video via 5 pin 180 DIN socket at rear.
10 ~ 26 VDC via 4 Pin socket at rear, with Automotive Reverse Gear (+) input to power-on in Reverse only.

Output:
12 Volts DC Regulated for Camera via 5 pin 180 DIN socket at rear.

Controls:
On / Off push-button on front.
Brightness Day / Night push-button on front.
Automatic (via Reverse Switch) or Manual On/Off push-button on front.
Vertical Hold rotary control at rear.
Brightness rotary slotted control on front.
Contrast rotary slotted control on front.

Power Requirements:
10 ~ 26 VDC

Dimensions:
~ 137 mm (W) ~ 126 mm (H) ~ 163 mm (D)
Weight ~ 1.1 kilograms

Supplied with:
Removable "Smoke Visor" for CRT to reduce on-screen glare from Daylight, Top and Side "Sun Shield" (as shown in Picture at Top of this Page), metal "U" shaped Dash Mount Bracket with three attachment Bolts & Nuts, two Bolts & Plastic Caps for attaching Bracket to sides of Monitor, 4 pin plug with wires for Power Supply & Reverse Switch input, two ~ 25 mm Rubber Grommets & short length of Flexible conduit.

Security Camera

APPLICATION NOTES