CCTV Video Surveillance Combination
Monitor Switcher for use with Video Cameras, Quad Image Processors,
Multiplexers, Video Players etc etc. Mains operated in Commercial Style Metal
Case. Use with 1 to 4 Video Cameras and a regulated Power Supply for an INSTANT
low-cost yet effective Closed Circuit Television System.
MON/SW-BW 14 Security Video Monitor
COMBINATION 14 Inch MONOCHROME MONITOR with Inbuilt 4 Channel SWITCHER
$276
(A)
$307 (B)
$25
to-your-door in CBD by Road
MONITOR
with Inbuilt 4 Channel Sequential SWITCHER
METAL CASE 14" MONOCHROME
~ 1300 Lines Horizontal Resolution (center)
Sensitivity 0.5 to 2.0 v p-p, Negative Sync
Four Standard CCIR 75 ohm Composite Video Inputs, BNC socket
Two Standard CCIR 75 ohm Composite Video Outputs, BNC socket
CONTROLS
Front Panel:
On/Off Switch, Channel 1, 2, 3, 4 Selector and Auto-Set Pushbuttons, Switch
Dwell, Vertical-Hold, Horizontal Hold, Brightness & Contrast.
Rear Panel:
Vertical Size, Vertical Linearity, Sub Brightness, Focus and 75 ohm or High
Impedance Video Termination Switch.
Power requirements: 240 vac, 50 Hz, ~ 35 Watts
315 mm (W) 340 mm (H) 315 mm (D)
Weight ~ 11 kilograms (~ 18 kg³)
Plug-In DIY AV 20 metre Cable / Adaptor Set: 20
metre AV Cable with moulded Plugs & Socket. Two RCA Plugs & DC Plug for Camera
end. Two RCA Plugs for input device, DC Socket for Plug-Pack. Two BNC-RCA
Adaptors for Camera, VCR, Quad, Switcher, Multiplexer, Monitor, Transmitter,
etc.
with
1.5m Cable & Adaptors: + $6
Dual 1.5 m Cable with two RCA Plugs each end, supplied with two BNC-RCA Adaptors
for interconnecting: Quad / Multiplexer / Monitor / VCR etc.