Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester
 
NEW Security Camera Tester PTZ Tester with Volt Ohm Meter & Composite Video Signal IRE level & 12 Volt DC to power Camera
PTZ
TEST / SETUP Security Cameras via 12 VDC Output / Lenses / Video Monitors / Pan Tilt Zoom Focus Cameras / RS232 RS422 RS485 devices / MEASURE ac volts DC Volts Resistance / TEST DISPLAY ANALYSE Hexadecimal PTZ control data from PTZF controllers / TEST UTP Twisted Pair Cat-5 Cat-6 Network Cables

[CCTV-Test+] only $299

Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ TesterSecurity Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester

Power - Test PTZ - Aim - Focus Security Cameras & Lenses without help, save time by not having to move back & forth between Camera & Monitor locations.

This Security Camera tool is a Security Camera PTZ Tester & Lens setup Monitor with 12 Volt DC Output to Power Camera Generate control signals (hexadecimal, Pelco) to test Pan-Tilt-Zoom-Focus Security Cameras & setup Security Cameras via OSD menu * Test Network Cables * Multi-Meter for ac & DC Voltage & Resistance & composite video signal/sync attenuation IRE level measurements * Video Monitor test NTSC using Colour signal generator * PTZF hexadecimal protocol analyser (display hexadecimal data from RS485 devices) in a single compact package.

This is all you need for common Security Camera setup & testing, it Powers Cameras, is easy-to-carry has a Bright Crisp 960 Horizontal Pixel 2.5inch (6.3cm) colour LCD TFT screen with Sun Shade, on-screen-menu & display for PTZ device diagnostics.

This hexadecimal PTZ data analyser / controller is compatible with most common RS485 protocols, it is ideal for testing, setup & programming of Cameras in the field, it can be used to verify integrity of PTZ cabling & send PTZF signals to Cameras & other devices, test PTZ, it will Decode & Display RS485 hexadecimal values from PTZ controllers, Digital Video Recorders, IP Video Servers, Network Cameras, Network Recorders, PC based Recorders, etc.

User Manual Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester to view pages from 'User's Manual'

Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester
TEST / SETUP

Lenses (Focus & Point)

Access Camera Setup menus

Video Monitor, DVR (NTSC only)

Security Cameras (PAL & NTSC)

UTP Cat-5 Cat-6 Twisted Pair Network Cables

RS-232 RS-422 RS-485 PTZ Tester Pan Tilt Zoom Focus Cameras & Controllers Pelco-D, Pelco-P, Samsung, Panasonic, Molynx protocols

DISPLAY

Composite Video Signals from PAL & NTSC Security Cameras or other devices.

Hexadecimal RS485 PTZF data from Pan Tilt Zoom Focus controllers, Digital Video Recorders, IP Video Servers, Network Cameras, Network Recorders, PC based Recorders, etc. Recognises Pelco-D, Pelco-P, Samsung, Panasonic & Molynx protocols

MEASURE

ac voltage: 0.1 mV to 750 Volts, 0.1 mV resolution

DC Voltage: 0.1 mV to 1000 Volts, 0.1 mV resolution

Resistance: 0.1 Ω to 40 000 000 Ω, 0.1 Ω resolution

Attenuation: of Composite Video peak-peak / Sync IRE levels

INPUT / OUTPUT

Camera Power ~ 12 VDC 400 mA maximum

Composite Video input (BNC)

Composite Video output (BNC)

Network Cable Test (RJ45)

Pan / Tilt / Zoom RS232 (DB9) RS485 input/output (press-to-release terminals)

Power (Charger) input 5 Volts DC

 

On Screen Display (OSD)

Rechargeable Lithium Battery

Sleep mode & Battery level indicator

960 H-Pixel Display for precise Focussing

Compatible with following RS485 Devices:
DomePTZ-2 | DomePTZ-dn2 | DomePTZ-3 | DomePTZ-dn3 | AutoCam-dn
| IPw-CSdnProg | IP-CSdnAV | IPw-CSdnAV | IP-CSHR | IP-CSdn | IP-CSdnHR | IP-CSdnProg | DVR4-H264 | DVMR-LC8N | DVMR-J8H | DVR16-H264 | DVMR-J16H | DVR16rt-H264 | Joystick PTZF RS485 Controller

 

Package Contents
CCTV-Tester
User Manual
Neck Strap with Clips
RS485 Test Cable with Clips
Patch Cable BNC to BNC Plug
Rechargeable Lithium Battery
MultiMeter Test Leads with Probes
Network Cable Test Terminator (RJ45)
Camera 12 VDC output Cable with 2.1 x 5.5 mm DC Plug center (+)

Aust/NZ Mains Plug Pack 100~240 vac 50~60 Hz input
5 Volts DC output
also available are European or USA or UK Mains Adaptor (Power Supply)

Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester

 

 
Test-CCTV35

only $299
Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester3.5 Inch Security Camera RS485 PTZ Test Analyser UTP Pan Tilt Zoom PTZ Tester

3.5 Inch Test CCTV Cameras Test & Analyse RS485 PTZF Devices Setup CCTV Cameras Lenses Pan Tilt Zoom Focus Cameras RS485 devices TEST & DISPLAY Hexadecimal PTZ control data from PTZF controllers TEST Audio, UTP Network Cables Measure Video Signal mV & IRE levels
Power 12VDC Cameras

 

 
RX-Mon7
only
$99
Portable Wireless AV Video Sender Receiver Monitor
7" Wide-Screen 16:9 or 4:3 LCD TFT Colour Video Monitor
Inbuilt 4  Channel
2.4 GHz Video & Audio Receiver Manual Selection Automatic Sequential Switching external Audio & Video Inputs & Outputs fully self contained only requires Power supply or Battery to operate

 

*
IRE

Institute of Radio Engineers.  Units of measurement dividing the area from the bottom of sync to peak white level into 140 equal units.  140 IRE equals 1Vpp.  The range of active video is 100 IRE

TV Systems

  • CCIR = Australian / European Monochrome TV System

  • PAL = Australian / European Colour TV System

  • EIA = USA / Japan Monochrome TV System

  • NTSC = USA / Japan Color TV System