HIGH RESOLUTION Mini Colour
CCTV Video Surveillance Camera. Connect to 12 VDC & Composite Video AV input
on TVs, VCRs, Capture Cards, etc. 1/3 inch LOW
BLEMISH CCD Image Sensor, Digital Signal
Processing, suitable for normal light levels in Homes, Offices, Showrooms etc.
For: CCTV Video Surveillance Observation, Security & many other Closed
Circuit Television applications including image capture, machine vision,
Web-Cams, inspection, rear vision automotive CCTV and general surveillance. Use
CCTV - TV / VCR Interface Module connected to TV antenna system for viewing /
recording on all TVs and VCRs. Use our PC Digital Video Recording Systems for
High Resolution image capture with Motion Detection, Masking, Dial-Up, Paging,
LAN & other facilities.
Cat Code: MINI-C46
1/3" CCD
Image Sensor * HIGH Resolution * Digital
Signal Processing Mini Wall / Ceiling Colour Camera
with 3.6 mm Board Lens
Only ! $199
with 3.6 mm Lens * with 25 mm Lens
HIGH
RESOLUTION * 1/3" LOW
BLEMISH CCD Image Sensor * Mini Wall / Ceiling COLOUR
CCTV Video Surveillance Camera *Suitable for average light levels in Homes,
Shops, Showrooms, Offices, Warehouses, etc * DIY Plug-In installation when
purchased with Plug Pack and Cable/Adaptor Set.
* Click on
underlined items for additional information *
Need Sound ? click here
fitted with Exposure /
Glare Reduction Filter + $15
Use this to reduce Over-Exposure and Glare with OUTDOOR DAYLIGHT images,
click here for more
information.
Optional lens is supplied
fitted to camera in place of standard lens, all lenses suitable for this Camera
are listed near bottom of this page, click on the underlined Lenses
link for prices.
Video Output: 1 v p-p Composite Video 75 ohms, suit
Australian TV, VCR, AV & Video inputs, BNC socket, ~ 30 cm cable.
Horizontal Resolution: 520 +
lines. Better than VHS * Near
Super-VHS resolution.
Minimum Illumination: ~ 5 lux @
F1.2.
Automatic Electronic Shutter (AES): Linear 1/50 to 1/100 000
second, 20 milliseconds to 10 microseconds.
Automatic Gain Control: Yes.
Signal to Noise ratio: ~ 46 dB.
Power Requirements: 12 Volts DC Regulated, ~ 270 milliamps,
2.1 x 5.5. mm DC socket ~ 30 cm cable.
Back-Light Compensation: Yes.
White Balance: Automatic.
MicroFine Focussing: Yes.
Dimensions: ~ 45 mm Wide (excluding Bracket & Mounts), ~
44 mm High, ~ 40 mm Deep, ~ 105 grams.
Made in: Taiwan.
Manufacturer's Experience: 15 + Years
in CCTV.
Accessories:
Plug-In
DIY AV 20 metre Cable / Adaptor Set: 20 metre AV Cable with moulded
Plugs & Socket. Two RCA Plugs & DC Plug for Camera end. Two RCA Plugs
for input device, DC Socket for Plug-Pack. One BNC-RCA Adaptor VCR, Quad,
Switcher, Multiplexer, Monitor, Transmitter, etc.