High 720 + H-Pixel True Day Night Colour Security Camera
Infrared Night Vision Sony CCD HQ1 ChipSet Aperture Correction
Silver pictured - we stock
This Camera addresses shortcomings associated with ordinary
Day / Night Colour Cameras & Infrared Illumination
Automatic mechanically movable Infrared Cut Filter for Vivid
Colour Rendition & maximum low light & Infrared Sensitivity
Fast Automatic Iris Lens to cope with High Levels of
Illumination increase depth-of-field & maximise low light
Variable Focal Length Lens for flexibility & corrected for
major Visible-Infrared focus shift
Low 20 millisecond Shutter Speed to minimise Smear
associated with High Shutter Speeds
EXTRA HIGH RESOLUTION True
Day Night Vision See-in-the-Dark
Outdoor Surveillance Cameras
with HQ1 Digital Signal Processing Chipset
⅓" Sony Super-HAD CCD.
EXTRA HIGH 720 + H-Pixels - 2H enhanced Aperture Correction -
Robust Aluminium Case - Removable Visor - Integral Swivel & Tilt
Mounting Bracket that conceals/protects Cable.
For Extra High Resolution
for high to zero
illumination levels in Homes, Shops, Showrooms, Offices,
Warehouses, sheltered outdoor use under eaves, etc..
mixed order over $1000
Bulk-Buy $199 <10 +>
Plug Pack Regulated 12 VDC 1 Amp $20
DIY Plug-In 20m Video & Power Cable $30
Microphone & Preamplifier $20
Rectifier Regulator for long cable run, 24 vac power, etc
Range version with 56 IR LEDs
Video System: PAL Colour
fully compatible with Australian TV System.
752 (H) x 582 (V) 437 664 Pixel
1/3" Sony Super HAD CCD.
Focal Length 3.7 mm ~ 12 mm Automatic Iris copes with High levels
of illumination with negligible smear, passes more light and
provides greater depth-of-field than ordinary fixed Iris Lenses *
for major Visible-Infrared focus shift.
There are no
Accessory Lenses for this Camera.
Scanning System: 2 : 1 Interlace,
PAL 50 Hz vertical, 15 625 Hz horizontal.
Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV,
VCR, AV & Video inputs, BNC socket, ~ 20 cm Cable exits through
Bracket for concealment and protection against tampering.
Horizontal Pixels: 720 + this value
is provided for comparative purposes only. Better than Super-VHS
resolution near DTV / DVD (720 pixel) resolution.
Sensitivity: ~ 0.5 lux @ F1.2 in
Night mode 10 IRE (this value is approximate and provided for
comparative purposes only), 0 lux with LEDs 'ON'. Depending on
Lens 'focal length' setting the Infrared LEDs illuminate up to ~
80% of the Width-of-Vision and are effective up to ~ 20 m
depending on the Infrared reflective characteristics of subject.
Light Emitting Diodes: Twelve
High-Output ~ 850 nm wavelength Infrared, these produce a dull Red
visible glow. Automatic Light Sensor switches LEDs On/Off (~3/5
lux) depending on light level.
Movable Infrared Optical Filter:
mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between Lens and
Image Sensor to exclude Infrared radiation that would otherwise
adversely affect colour reproduction, this ensures
colour rendition not possible with ordinary non-filtered or
notch-filter type Day/Night cameras.
In Night mode (low light, monochrome) mechanism
automatically removes IR-CUT optical filter to allow
Infrared radiation to pass boosting low light and Infrared
sensitivity, the result is significantly better night images using
Infrared Illuminator or with Infrared rich light sources.
without Infrared filter is ~ 700 to ~
1100 nm better than a
notch IR Filter', additional
CCTV Infrared Night Vision information.
Automatic Electronic Shutter (AES):
milliseconds, low shutter speed eliminates smear associated with
High Shutter Speeds necessary to control exposure with fixed iris
CCTV Automatic Electronic Shutter information.
400 to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical path,
CCTV Infrared Night Vision information.
Signal to Noise ratio (SNR): 48 + dB, measured with AGC off.
Aperture Correction: Horizontal & Vertical 2H
Automatic Gain Control (AGC): Yes.
Back Light Compensation (BLC):
Automatic, Center Area.
White Balance (WB): Automatic.
Power Requirements: 12 Volts DC
Regulated, ~ 400 milliamps with LEDs On, ~ 150 milliamps with LEDs
Off, 2.1 x 5.5 mm DC socket, center pin = (+),
~ 20 cm cable, Cable exits through Bracket for protection against
tampering. Consider cable resistance when installing, ask us about
solutions if voltage drop is a problem with existing wiring.
Made in Taiwan in an ISO 9001
Manufacturer's Experience: 18 +