System: PAL Colour fully compatible with Australian TV System.
(H) x 582 (V) 437 664 Pixel
inch SONY Super HAD II Interline Transfer CCD Sensor.
"Super HAD CCD II" is a trademark of Sony Corporation. The
"Super HAD CCD II" is a version of Sony's high performance CCD
HAD (Hole-Accumulation Diode) sensor with realized sensitivity
(typical) of 1000mV or more per 1Ám2 (Color: F5.6/ BW: F8
in 1 s accumulation equivalent.)
Motorised Focus/Zoom, 26X Optical ZOOM, focal length 3.2 mm ~
83.2 mm, Automatic Iris.
Setup: On Screen
Display, menu driven via push-buttons on Back of Camera or
remotely via RS485 (Pelco-D protocol) or via 6 wire DC
Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz
Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV,
VCR, AV & Video inputs, BNC socket.
Horizontal Pixels: 720 + Better than Super-VHS near DVD
resolution, this value is provided for comparative purposes
0.1 Lux @ F1.2 without IR-CUT Filter, (this
value is provided for comparative purposes only)
Camera produces images in total darkness with an
Day Night: Motorised
movable Infrared Cut Filter (IR-CUT) Automatic (Filter moves
based on illumination level), Colour (Filter in optical path),
Monochrome (Filter out of optical path).
Movable Infrared Optical Filter: Automatic
switching based on illumination level.
Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between Lens and
Image Sensor to exclude Infrared radiation that would otherwise
adversely affect colour reproduction, this ensures
colour rendition not possible with
ordinary non-filtered or notch-filter type Day/Night cameras.
In Night mode (low light, monochrome) mechanism
automatically removes IR-CUT optical filter allowing
Infrared radiation to pass boosting low light and Infrared
sensitivity, the result is significantly better night images
Infrared Illuminator or with Infrared rich light sources.
without Infrared filter is ~ 700 to ~
1100 nm better than a
notch IR Filter', additional
CCTV Infrared Night Vision information.
Signal to Noise ratio (SNR): 50 +
dB, measured with AGC off.
Back Light Compensation: On / Off.
Automatic Gain Control (AGC): 3 levels.
Requirements: 12 Volts DC Regulated, ~ 100 milliamps static ~
200 milliamps when Zoom/Focus Motors are operating, via Screw
Dimensions (mm): ~ 126 x 78 x 63, excludes BNC Socket & I/O
(grams): ~ 580.
Made in China.
Manufacturer: Established 1997