|
|
 Converts
a CS Mount Camera to C Mount, 1 inch x 32 TPI thread (style / colour
may vary depending on stocks).
C-SPACER/BP Bulk Pak 25 pieces
$99
subject to availability |
|
|
 Plastic
type pictured current stocks are Aluminium. CS Mount 1 inch x 32 TPI
thread to 12 mm x 0.5 mm Lens converter, allows most Board and some
Pinhole Lenses to be used on a CS Mount Camera. |
|
|
 Suits
all C and CS Mount Cameras with an Auto Iris Lens Output in this
Catalogue. Plug-AI//BP Bulk Pak 50 pieces $25 |
|
|
 Allows
a DC DRIVE Lens to be used on Cameras that only have Video Drive AI
Lens output. Common 4 Pin Input Plug & Output Socket, 8 ~ 16 VDC.
'LEVEL' (Image Signal Level) & 'A.L.C.' (Light Metering -
Average/Peak) adjustment Potentiometers. Compact ~ 33 mm x ~ 16 mm x
~ 10 mm, ~ 7 grams. Pin-Out - Plug (can be rewired) Camera: (1)
Positive, (2) NC, (3) Video Signal, (4) Gnd Negative. Socket Lens:
(1) Damp -, (2) Damp +, (3) Drive +, (4) Drive -. |
FILTERS
for: experimental purposes |
|
|
InfraRed PASS |
|
|
|
Sheet
of Optical Quality Long Pass Material, passes light greater than ~
670 nanometres wavelength. Suitable for concealing Camera Lens or
the LEDs in an IR Illuminator (ILLUM-KIT)
or for construction of an Infra-Red Illuminator using an
incandescent lamp. Lightweight plastic, Thermoset ADC (CR-39),
transmission > 90%, 1-2% peak at 500 nanometres green colour.
Maximum operating temperature 100 degrees centigrade continuous (130
degrees one-hour). Thickness ~ 1.5 millimetres ~ 100 mm x ~ 125 mm.
  |
|
|
Infra-Red Pass Film 0.1 mm flexible, passes light greater than ~ 730
nanometres wavelength. Covers the rear element of most Board or
Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm disc. |
|
|
Glass
~ 25 mm Square, ~ 3 mm Thick. Reflects Visible Spectrum (less than ~
700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700
nm), to reduce heat in projection systems, etc etc. |
|
|
Glass
~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible Spectrum (less than
~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~
700 nm), to reduce heat in projection systems, for Incandescent
Infrared Illuminators, etc etc. |
|
Infra-Red CUT |
|
|
|
used, has some surface marks - Band-Pass Filter passes between ~
320 ~ 620 nanometres, can also be used as a Short Pass filter with
Cut-Off @ ~ 645 nm. Glass ~ 25 mm Diameter, ~ 3 mm Thick, Blue-Green
Colour, Center Wavelength ~ 470 nm. |
|
|
used, virtually unmarked - Infra-Red CUT Filter passes light
less than ~ 700 nanometres wavelength, Glass multi-layer ~ 25 mm
Diameter on one side and ~ 17 mm Square on other, ~ 10 mm Thick,
fitted in ~ 35 mm Diameter Rubber Mount. |
|
|
Glass
~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible Spectrum (less than
~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~
700 nm), to reduce heat in projection systems, for Incandescent
Infrared Illuminators, etc etc. |
|
|
Glass
~ 25 mm Square, ~ 3 mm Thick. Reflects Visible Spectrum (less than ~
700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700
nm), to reduce heat in projection systems, etc etc. |
|
|
Mirror, Concave, First Surface, Gold Coated, Glass ~ 32 mm Diameter,
~ 5 mm Thick, ~ 25 mm Focal Length. |
|
Colour
Temperature Correction |
|
|
|
Colour
Temperature Correction Filter for 3600 degree Kelvin Fluorescent
Lamps, Film ~ 0.1 mm, flexible. Covers the rear element of most
Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm
disc. |
|
|
Colour
Temperature Correction Filter for 4300 degree Kelvin Fluorescent
Lamps, Film ~ 0.1 mm, flexible. Covers the rear element of most
Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm
disc. |
|
Polarised |
Extinction (crossed) ~ 0.4% - 0.5% |
|
|
Covers
the rear element of most Board or Pinhole lenses or image area of a
1/3 inch sensor ~ 10 mm flexible disc, ~ 0.25 mm thick, Grey tint,
Transmission ~ 25%. |
|
|
63 mm
diameter, flexible disc, ~ 0.65 mm thick, Grey or Brown tint
depending on stocks, Transmission: ~ 22% Brown, ~ 25% Grey. |
|
|
'$5.00
Cutting Charge' plus $0.20
per cm² , minimum buy 25 cm² ($10)
Specify dimensions when ordering. Flexible Polarising Material
Cut-to-Size (rough cut) to cover the front element of a lens, for
window of an outdoor housing, etc., ~ 0.74 mm thick, Brown tint,
Transmission ~ 22%, Polarising Efficiency 99+%, UV Absorption 99+%
 |
|
Colour Transparent
Film |
|
|
|
BOOK
of 100, 82 mm x 38 mm sheets most with a Spectral Transmission
Graph. Coloured layer is sealed between two microscopically thin
layers of clear film using tri-extrusion technology. Ideal for
inspection and other applications, often unseen details will be
revealed depending on light source, filter colour, etc.
 |
|
PCB Lens Holders |
Surplus clearance items for experimental purposes NO
DIMENSIONAL OR OTHER INFORMATION AVAILABLE It may or may not be
possible to adapt these to suit products in this catalogue. Holders
may sometimes be attached directly to the IMAGE SENSOR IC with
neutral cure silicone or other adhesive. |
|
|
Plastic PCB Lens Holder 12 mm x 0.5 mm thread for Pinhole Lens.
 |
|
|
Plastic PCB Lens Holder 10 mm x 0.5 mm thread for Pinhole Lens.
 |
|
|
Plastic PCB Lens Holder 13 mm x 1 mm thread for Pinhole Lens.
 |
|
|
Aluminium PCB Lens Holder 10 mm x 0.5 mm thread for Pinhole Lens.
 |
|
|
Aluminium PCB Lens Holder 13 mm x 1 mm thread for Pinhole Lens.
|
|
|
Metal
PCB Module Swivel & Tilt Bracket to suit most 32 x 32 mm Modules, 4
x ~2mm screws, ~28 mm centers.
Click Image
to enlarge |
|
|
Metal
PCB Module Swivel & Tilt Bracket to suit most 32 x 32 mm & 42 x 42
mm Modules, 4 x ~2 mm screws, ~6.5 mm standoffs, ~28 mm or ~38 mm
centers.
Click Image
to enlarge |
