Worldwide Air Delivery
3 ~ 5 Day Worldwide Delivery
Home Page

CCTV Security Camera Infrared Illuminator Lamps
 
Infrared Light Emitting Diode Illuminators Ready-to-Use PCB

O'Nite Delivery
OVERNIGHT to most locations
Contact us

IR36-PCB only $9

Ready-to-Use 8 Watt Infrared LIGHT EMITTING DIODE PCB IR Lamp for Monochrome & InfraRed sensitive Day/Night colour Cameras.

Thirty Six 5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 70º radiation angle, produces a visible dull Red glow.

Main Spot Diameter ~ 3 metres @ 3 metres, illuminates ~ 75% of the width-of-vision with a 1/3" Image Sensor & 3.6 mm Lens.

*Power Requirements: Up to 12 Volts DC, ~ 650 milliamps @ 12 Volts, 2.1 x 5.5 mm DC Socket (center pin = +) on ~ 300 mm cable. PCB ~ 75 x ~ 90 mm (can be 'cut' to 75 x 82), 50 mm 'Hole'.

 Infrared CCTV Security Illuminator

IRpcb532W1 only $19
spare part for CCDsony-IRHR

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when 'Visible' illumination on LDR sensor is near zero.

Twenty 5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 70º radiation angle, Main Spot Diameter ~ 3 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC, ~ 90 milliamps via 2-pin socket on back of PCB (matching Plug with ~ 50 mm Wires included, 'Red' wire is positive. PCB ~ 45 mm Diameter, ~ 14 mm Deep excluding socket, ~ 18 mm 'Hole'.

 CCTV Security Infrared LED PCB
click image to enlarge

IRpcb54KOP only $19
spare part for MINI-COL-IR

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when illumination "Visible or Infrared" on LDR sensor is near zero.

Twelve 5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 60º radiation angle, Main Spot Diameter ~ 2.5 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC, ~ 120 milliamps via 2-pin socket on back of PCB (matching Plug not stocked), 'Black' mark on socket indicates negative terminal. PCB ~ 42 mm Diameter, ~ 12 mm Deep excluding socket, ~ 20 mm 'Hole'.

 CCTV Security Infrared PCB Lamp
click image to enlarge

  IRpcb962DI3 only $24
spare part for EffioE-960HBall

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when 'Visible' illumination on LDR sensor is near zero.

Twenty Four 5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 70º radiation angle, Main Spot Diameter ~ 3 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC, ~ 125 milliamps via 2-pin socket on back of PCB (matching Plug with ~ 50 mm Wires included, 'Red' wire is positive. PCB ~ 53 mm Diameter, ~ 14 mm Deep excluding socket, ~ 18 mm 'Hole'.

 CCTV Security Infrared Light Emitting Diodes
click image to enlarge

IRpcbP660IR only $29
spare part for Dome-IRHR+

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when illumination "Visible or Infrared" on LDR sensor is near zero.

Twenty Four 5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 60º radiation angle, Main Spot Diameter ~ 2.5 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC, ~ 150 milliamps via 2-pin socket on back of PCB (matching Plug with ~ 50 mm Wires included, 'Red' wire is positive. PCB ~ 45 mm Diameter, ~ 14 mm Deep excluding socket, ~ 18 mm 'Hole'.

 CCTV Security IR LED PCB
click image to enlarge

IRpcb3VD580IR only $19
spare part for Dome-dnIRHR+

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when 'Visible' illumination on LDR sensor is near zero.

Twelve 5 mm Infrared Light Emitting Diodes, ~ 850 nm wavelength, ~ 70º radiation angle, Main Spot Diameter ~ 3 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC. PCB ~ 60 mm Diameter, ~ 14 mm Deep excluding socket, ~ 31 mm 'Hole'.

 CCTV Camera Day Night Security IR LED PCB
click image to enlarge

IRpcbXP8860 only $39
spare part for Maxi-dnIRHR+

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when 'Visible' illumination on LDR sensor is near zero.

Eighteen Infrared Light Emitting Diodes nine 5 mm & nine 8 mm, ~ 850 nm wavelength, ~ 60º radiation angle, Main Spot Diameter ~ 2.5 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC. PCB ~ 70 mm Diameter, ~ 16 mm Deep excluding socket, ~ 46 mm 'Hole'.

 CCTV Security Day Night Lamp IR LED PCB
click image to enlarge

IRpcb4VIR800 only $29
spare part for Maxi-D/NiteHQ1 Maxi-D/NiteEx Maxi-DayNite

Ready-to-Use Infrared LIGHT EMITTING DIODE PCB Lamp for InfraRed sensitive Cameras. Light Dependent Resistor & Transistors control LED current which is maximum when illumination "Visible or Infrared" on LDR sensor is near zero.

Fifty Six Infrared 5 mm Light Emitting Diodes, ~ 850 nm wavelength, ~ 60º radiation angle, Main Spot Diameter ~ 2.5 metres @ 3 metres. produces a visible dull Red glow.

Power Requirements: 12 Volts DC. PCB ~ 74 mm Diameter, ~ 16 mm Deep excluding socket, ~ 44 mm 'Hole'.

 CCTV Security Lights IR LED PCB
click image to enlarge

CCTV Security Camera Infrared IR LightReady to use Hi-Power 140 LED IlluminatorCCTV Security Camera IR Illuminator

CCTV Security Infrared Illuminator

discontinued

Cat Code: IR-LEDkit/850 $49 - 'Kit'

52 mm Diameter 50 LED Round Lamp Kit - PCB, LEDs, Housing & Assembly Notes.

Wavelength / Angle: ~ 850 nm,  ±7º (14º)

Max Radiant Intensity: ~ 200 mW/sr @ Max 100 mA

Visibility @ Max current: Dull Red Glow

Forward Voltage at Max Current for 5 LEDs in series = ~ 10.5 volts.

Main Spot Diameter:  ~ 0.74 metres @ 3 metres.

PCB tracks are arranged as Five Groups of 10 series connected LEDs. Interconnections may be rearranged to create Ten Groups of 5 series connected LEDs. Groups are paralleled and a series resistor used to limit total current.

Construction of  Five Group Lamp is straightforward. Ten Group Lamp requires extra care as 25 LEDs are inserted backwards. The edges of some LEDs may need to be filed.

It may not be possible to operate Infra-Red LEDs continuously at Max Current due to heat.

Range is affected by Lens Transmittance, Camera Sensitivity & Spectral Response of Image Sensor/Camera.

Best results will be achieved by matching the 'Lens' Horizontal Angle-of-View and the LED Radiation Angle (when Camera and Illuminator are positioned at the same distance from subject and illumination of full width is required).

CCTV Security Camera IlluminatorReady to use LED Illuminator in Outdoor Camera HousingCCTV Security Camera Infrared Light

CCTV Security infrared lamp

discontinued

Cat Code: IRLEDkit-940/20 $29 - 'Kit'

52 mm Diameter 50 LED Round Lamp Kit - PCB, LEDs, Housing & Assembly Notes.

Wavelength / Angle: ~ 940 nm,  ±10º (20º)

Max Radiant Intensity: ~ 120 mW/sr @ Max 100 mA

Visibility @ Max current:  Just perceptible.

Forward Voltage at Max Current for 5 LEDs in series = ~ 7 volts.

Main Spot Diameter:  ~ 1.06 metres @ 3 metres.

PCB tracks are arranged as Five Groups of 10 series connected LEDs. Interconnections may be rearranged to create Ten Groups of 5 series connected LEDs. Groups are paralleled and a series resistor used to limit total current.

Construction of  Five Group Lamp is straightforward. Ten Group Lamp requires extra care as 25 LEDs are inserted backwards. The edges of some LEDs may need to be filed.

It may not be possible to operate Infra-Red LEDs continuously at Max Current due to heat.

Range is affected by Lens Transmittance, Camera Sensitivity & Spectral Response of Image Sensor/Camera.

Best results will be achieved by matching the 'Lens' Horizontal Angle-of-View and the LED Radiation Angle (when Camera and Illuminator are positioned at the same distance from subject and illumination of full width is required).

Infrared Illuminator CCTV Security CameraINFRA RED LONG PASS FILTER SHEETS Make a Higher Output INCANDESCENT IlluminatorCCTV Infrared Illuminator

CCTV Security Infrared Light

discontinued

Cat Code: IRLEDkit-940/40 $29 - 'Kit'

52 mm Diameter 50 LED Round Lamp Kit - PCB, LEDs, Housing & Assembly Notes.

Wavelength / Angle: ~ 940 nm,  ±20º (40º)

Max Radiant Intensity: ~ 90 mW/sr @ Max 100 mA

Visibility @ Max current: Just perceptible.

Forward Voltage at Max Current for 5 LEDs in series = ~ 7 volts.

Main Spot Diameter:  ~ 2.1 metres @ 3 metres.

PCB tracks are arranged as Five Groups of 10 series connected LEDs. Interconnections may be rearranged to create Ten Groups of 5 series connected LEDs. Groups are paralleled and a series resistor used to limit total current.

Construction of  Five Group Lamp is straightforward. Ten Group Lamp requires extra care as 25 LEDs are inserted backwards. The edges of some LEDs may need to be filed.

It may not be possible to operate Infra-Red LEDs continuously at Max Current due to heat.

Range is affected by Lens Transmittance, Camera Sensitivity & Spectral Response of Image Sensor/Camera.

Best results will be achieved by matching the 'Lens' Horizontal Angle-of-View and the LED Radiation Angle (when Camera and Illuminator are positioned at the same distance from subject and illumination of full width is required).

Infrared Application Notes

INFRA RED LONG PASS FILTERS for Lenses

SEE-in-the DARK Camera with Inbuilt InfraRed LEDs Colour Day/Night IR Camera

CCTV Infrared Illuminator Kits for use with all Closed Circuit Television monochrome video surveillance cameras listed in this catalogue. High Output 850 nanometre version is an excellent match with the spectral response characteristics of the SONY Low Noise High Sensitivity HAD CCD Image Sensor used in our most sensitive video cameras. 14 to 70 degree radiation angles. Infrared Illuminator may be mounted alongside camera or several Illuminators may be used to illuminate larger areas. When used with an Infrared Pass filter images from Video Camera are sharper in normal visible light and still sharply focussed with Infrared Illumination only. Use Infrared Long Pass Filter Sheets to make-your-own HIGH OUTPUT Incandescent Infrared Illuminator and/or to conceal Video Camera or LED Illuminator.