Rugged Aluminium Housing Vandal Hardened Analog HD Security
HD CCTV surveillance Camera 33% more pixels than DVD SDTV D1 & traditional CCTV Cameras
 Sony's best + million pixel EXview Super HAD CCD II 960H technology "568 032 Pixel CCD"
Vandal Hardened Colour Day Night See-in-the-Dark Security Camera low-noise high-sensitivity CCD variable focal length Lens Infrared Illuminator for operation in darkness

New 960H EXview HAD II CCD from Sony eclipses earlier devices with 33% more Pixels & Wide-Band DSP. Vandal Hardened Security Camera in robust aluminium housing Colour Day Night Infrared with versatile Varifocal Lens.

Suitable for Showrooms, Offices, Warehouses, Homes, Factories sheltered, shaded & evenly lit outdoor use under eaves, etc.

Ball960H-IRHR $119
BULK BUY Price click on TRUCK for more information Bulk-Buy $89 (30+)

Ball960H-IRHR/Ev $99 ex-evaluation, one available


Power Supply $15 Special Price with Camera

Cable $20 Special Price 20 metre plug-in Power & Video surveillance Camera Cable

Microphones better than inbuilt microphones from $5

Robust Aluminium Housing, See-in-the-Dark Night-Vision IR illumination provided by inbuilt Infrared Illuminator

Variable Focal Length Lens 25 + m wide shots @ 15 m - Tight 1.2 m wide shots @ 3 m.

Better than a Dome No washed out low contrast images caused by IR-Lens leak-through, no internal reflections.


960H EXview Super HAD II CCD
HD Vandal Hardened Colour Day Night CCTV Surveillance Camera
Silver Colour stocked

High Resolution Infrared Night Vision Colour Security Camera

Robust Aluminium Housing

Low-Noise - High-Sensitivity - High-SNR - D-WDR - 3D-DNR

Vari-Focal WIDE / TELE Lens


 HD-Analog 960H DVR 568 032 pixel Security Recorders

Better than a Dome separate Lens and LED glass eliminates LED-Lens leak-through that results in washed-out low-contrast images, also eliminated are internal reflections caused by light entering from behind and sides, these problems cannot be resolved with a conventional one-piece Dome.

Security Camera Robust Housing CCD inbuilt IR Illuminator suitable for zero (total Darkness) & average levels of illumination. Suitable for domestic and commercial indoor and sheltered shaded & evenly lit outdoor Surveillance, easily added to an existing Security Recording system (or to replace an under performing Camera), simply connect Video Output from Camera to an unused Security DVR Video input.

Connect to the Composite Video Input (AV, Yellow RCA socket) on a TV, Domestic or commercial Recording Device, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more m.

Powered by Sony's 960H EXview HAD II CCD and paired with a Wide-Bandwidth Image Signal Processor to utilise the full potential of the 568 032 pixel CCD, this HD-analog Security Camera is capable of an extraordinary 650+ HTVL effective resolution, far better than traditional Security Cameras.


All values are approximate. @ 3 m @ 5 m @ 9 m @ 15 m
Width of Vision @ 2.8 mm setting 5.1 m 8.5 m 15.4 m 25.7 m
Width of Vision @ 12 mm setting 1.2 m 2 m 3.6 m 6 m
Additional Security Camera Lens information        


Video System: PAL Colour fully compatible with Australian TV System.

Lens: Variable Focal Length 2.8 mm ~ 12 mm Fixed Iris, external focal length & focus adjusters. There are no Accessory Lenses for this Security Camera, more.

Image-device: 960H ExView HAD CCD II from Sony 1020 (H) x 596 (V) 607 920 Pixels 976 (H) x 582 (V) effective pixels ⅓" SONY ICX673AK, 5 m (H) x 6.25 m (V) pixel size. *"EXview HAD CCD Ⅱ" is a trademark of Sony Corporation. The "EXview HAD CCD Ⅱ" is a CCD that realizes sensitivity (typical) of 1000mV or more per 1m2 (Color: F5.6/ BW: F8 in 1 s accumulation equivalent) and improves light efficiency by including near infrared light region as a basic structure of Sonys "EXview HAD CCD".

Image-Sensor: Active pixels 568 032. Effective resolution 414 720 pixels (based on 960x576 DSP output & 0.75 CCD interlace coefficient).

650+ HTVL-E Resolution: Whitepapers: HTVL Effective Specification & Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket on ~ 80 cm cable.

Sensitivity: 0.1 lux @ F1.2 in Night mode 10 IRE (this value is approximate and provided for comparative purposes only), 0 lux with LEDs 'ON'. Depending on Lens 'focal length' setting the Infrared LEDs illuminate up to ~ 90% of the Width-of-Vision and are effective up to ~ 30 m depending on the Infrared reflective characteristics of subject, objects closer than ~ 2 m may be overexposed when illuminated by LEDs.

Spectral Response: ~ 400 to ~ 1000 nm with an Infrared 'CUT' Notch between approximately 720 ~ 830 nm. For best colour rendition use light sources with a low or zero infrared component, these include conventional Fluorescent, Light Emitting Diodes, Compact Fluorescent. Colour Day / Night Infrared Infrared Night Vision information 'Primer' here.

Light Emitting Diodes: Thirty Six ~ 850 nm wavelength Infrared, these produce a dull Red visible glow. Automatic Light Sensor switches LEDs On/Off depending on light level.

Automatic Electronic Shutter (AES): 1/50 to 1/120 000 second, 20 milliseconds to 8.33 microseconds.

Flickerless: Yes.

Signal to Noise ratio (SNR): 50 + dB, measured with AGC off.

Digital Noise Reduction (DNR): 3D.

Digital Wide Dynamic (D-WDR): Yes.

Automatic Gain Control (AGC): Yes.

Back Light Compensation (BLC): Yes.

Gamma: 0.45.

White Balance: Automatic.

Power Requirements: 12 Volts DC Regulated, ~ 90 milliamps LEDs Off, ~ 250 mA LEDs On, 2.1 x 5.5 mm DC socket, center pin = (+) on ~ 80 cm cable.

Dimensions (mm): ~  120 (Dia) x 80.

Mass: ~ 670 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.

Day Night Infrared Security Camera

CCTV Surveillance Camera
Day Night Colour Infrared Light Emitting Diode (Night Vision) Cameras

Colour CCTV Day Night Cameras with inbuilt Infrared Light Emitting Diodes "See-in-the-Dark" and produce images when visible illumination is zero.

At average levels of illumination these Cameras produce Colour images, depending on their sensitivity (Lux) at low illumination levels and in total darkness the image is Monochrome.

These Cameras generally have a relatively high sensitivity image sensor and Fixed Iris Lens therefore under high illumination levels images will be overexposed for the reasons outlined here.

Ordinary CCTV Colour Cameras are relatively insensitive to Infrared because they have an IR CUT Filter between the Lens and Image Sensor, this filter excludes Infrared radiation with a wavelength greater than ~ 700 nm that would otherwise adversely affect White Balance, Colour Rendition and Image Sharpness.

Day / Night Colour CCTV Cameras are sensitive to Infrared because they either do not have an IR CUT Filter or utilise a special NOTCH IR CUT Filter that excludes the wavelengths most harmful to colour quality (720 ~ 830 nm) from reaching the Image Sensor.

A Colour Camera that does not have an IR CUT Filter usually has poor colour rendition characterised by a Pink-Red 'tint' when the illumination is InfraRed rich, use of a 'Notch' Filter helps however White Balance, Colour Rendition and Image Sharpness are compromised for Infrared sensitivity. (Image Sharpness can be restored by using a specially designed Lens that corrects for focus shift between Visible and Infrared)

The IDEAL Day / Night Infrared Sensitive Colour CCTV Camera utilises a Lens with an Automatic Iris to cope with high illumination levels - has a large aperture (low 'F' number) to maximise light transmission and is corrected for Infrared:Visible focus-shift, it also utilises a Traditional IR CUT Filter when illumination levels are adequate for Colour and REMOVES the IR CUT Filter when levels are low our Maxi Cameras have these features and are recommended for OPTIMUM results.

Infrared rich light sources include Daylight and most Filament type lamps including common Spot lamps, Tungsten lamps, Halogen lamps, etc.

The majority of Light emitted from 'Cold' type sources such as Fluorescent, Mercury Vapour, Sodium Vapour, etc., is visible, these sources contain little Infrared energy.

"See-in-the-Dark" Infrared capability using a notch (or no) IR-CUT Filter is a trade-off that adversely affects Colour rendition in "Infrared Rich" environments

See in the Dark Infrared Night Vision Day Night CCTV Camera Filter characteristics