720H Security Camera
Surveillance Cameras for Home Low-Cost 720H CCTV Camera
Wide-Angle 3.6 mm Lens ⅓" Sensor 11% higher effective resolution discreet mini Ceiling or Wall See-in-the-Dark Infrared Night Vision
Movable IR-CUT Filter

Economical discreet Ball style Ceiling or Wall Mount Infrared Colour Surveillance Camera, 11% higher effective resolution than best traditional Cameras.

See in the Dark this Camera is suitable for medium to high illumination levels in Homes, Shops, Showrooms, Offices, Warehouses, etc.

Ball-IR $39
BULK BUY Price click on TRUCK for more information Bulk-Buy $29 (carton of 72)


Power Supply $15 Special Price with Camera

Cable $30 Special Price 20 m Video & Power for 1 or 2 Cameras includes 2 x BNC-RCA

Motorised IR-CUT Filter for better colour rendition & low-light/IR-sensitivity, Infrared Illuminator for operation in total darkness.

Better than a Dome No washed out low contrast images caused by Infrared LED - Lens leak through.

Plug-In DIY installation when purchased with Cable-AVP 20 metre Video & Power Cable & REG12/0.3A Plug Pack.

Microphones better than inbuilt microphones from $5

" CMOS Imaging device
discreet Surveillance Camera
with 11% higher effective resolution than traditional interlaced Cameras
Surveillance Cameras for Home
from $29
720H Resolution Day Night infrared night vision CCTV Camera with motorised IR-CUT


Discreet colour CCTV Camera low cost for domestic and commercial situations with 11+% higher effective resolution than the best traditional CCD, simply connect Video Output to an unused CCTV DVR Video input.

Connect to the Composite Video Input (AV, Yellow RCA socket) on most TVs and Domestic or commercial Recording Devices, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more m.

Better than a Dome separation between Lens and Light Emitting Diodes prevents transmission of infrared from LED to Lens that causes washed-out reduced-contrast images in an ordinary Dome Camera.


All values are approximate. @ 3 m @ 5 m @ 9 m @ 15 m
Width of Vision 4 m 6.6 m 12 m 20 m


Video System: PAL fully compatible with Australian TV System.

Lens: Board Type 3.6 mm Focal Length, there are no Accessory Lenses for this Camera.

Image-Device: 762 (H) x 504 (V) 384 048 Pixels ⅓" Pixel Plus PC1089K CMOS. Progressive scan, effective resolution (720 x 480) 345 600 pixels 11+% higher than best traditional 720x576 CCD Cameras.

Synchronisation: Internal.

Video Output: CVBS, 2:1 Interlace PAL 50 Hz vertical, 15 625 Hz horizontal, 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, ~ 25 cm cable.

Horizontal Pixels: 720 equal to DVD, SDTV horizontal resolution (this value is provided for comparative purposes only).

Sensitivity: ~ 5 Lux (50 IRE), this value is provided for comparative purposes only, Camera produces images in total darkness when Infrared LEDs are 'ON'.

Infrared Illuminator: 8 Light Emitting Diodes (LED) ~ 850 nm wavelength Infrared, these produce a dull Red visible glow and switch On/Off depending on illumination level.

Movable Infrared Optical Filter:
Movable Infrared Cut Filter Day positionmoreMovable Infrared Cut Filter Night position

In Day mode (well lit, colour) mechanism automatically positions IR-CUT optical filter between Lens and Image Sensor to exclude Infrared radiation that would otherwise adversely affect colour reproduction, this ensures colour rendition not possible with ordinary non-filtered or notch-filter type Day/Night cameras.

In Night mode (low light, monochrome) mechanism automatically removes IR-CUT optical filter to allow Infrared radiation to pass boosting low light and Infrared sensitivity, the result is significantly better night images using inbuilt Infrared Illuminator or with Infrared rich light sources. Infrared Response without Infrared filter is ~ 700 to ~ 1100 nm better than a 'CCTV notch IR Filter'.

Spectral Response: ~ 400 to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical path, additional CCTV Infrared Night Vision information.

Automatic Tracking White Balance (ATWB): Yes.

Automatic Electronic Shutter (AES): Yes.

Automatic Gain Control (AGC): Yes.

Signal to Noise ratio: ~ 43 dB. ~ 50 dB measured with AGC Off.

Power Requirements: 12 Volts DC Regulated, ~ 45 milliamps LEDs OFF, ~ 115 milliamps LEDs ON, 2.1 x 5.5 mm DC socket, center pin +,  ~ 15 cm cable.

Dimensions (mm): ~ 90 diameter ~ 70 high.

Mass: ~ 110 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.


Tiny Microphone Microphone Wider pick-up angle Larger pick-up area More Sensitive than most inbuilt camera microphones position closer to source attach to camera bracket Use more than one for large area
Need Sound ? click here


    Surveillance Cameras for Home Day Night Colour Infrared Light Emitting Diode Night Vision
Colour CCTV Day Night Cameras with inbuilt Infrared Light Emitting Diodes "See-in-the-Dark" and produce images when visible illumination is zero.
At average levels of illumination these Cameras produce Colour images, depending on their sensitivity (Lux) at low illumination levels and in total darkness the image is Monochrome.
These Cameras generally have a relatively high sensitivity image sensor and Fixed Iris Lens therefore under high illumination levels images will be overexposed for the reasons outlined here.
Ordinary CCTV Colour Cameras are relatively insensitive to Infrared because they have an IR CUT Filter between the Lens and Image Sensor, this filter excludes Infrared radiation with a wavelength greater than ~ 700 nm that would otherwise adversely affect White Balance, Colour Rendition and Image Sharpness.
Day / Night Colour CCTV Cameras are sensitive to Infrared because they either do not have an IR CUT Filter or utilise a special NOTCH IR CUT Filter that excludes the wavelengths most harmful to colour quality (720 ~ 830 nm) from reaching the Image Sensor.
A Colour Camera that does not have an IR CUT Filter usually has poor colour rendition characterised by a Pink-Red 'tint' when the illumination is InfraRed rich, use of a 'Notch' Filter helps however White Balance, Colour Rendition and Image Sharpness are compromised for Infrared sensitivity. (Image Sharpness can be restored by using a specially designed Lens that corrects for focus shift between Visible and Infrared)
The IDEAL Day / Night Infrared Sensitive Colour CCTV Camera utilises a Lens with an Automatic Iris to cope with high illumination levels - has a large aperture (low 'F' number) to maximise light transmission and is corrected for Infrared:Visible focus-shift, it also utilises a Traditional IR CUT Filter when illumination levels are adequate for Colour and REMOVES the IR CUT Filter when levels are low our Maxi Cameras have these features and are recommended for OPTIMUM results.
Infrared rich light sources include Daylight and most Filament type lamps including common Spot lamps, Tungsten lamps, Halogen lamps, etc.
The majority of Light emitted from 'Cold' type sources such as Fluorescent, Mercury Vapour, Sodium Vapour, etc., is visible, these sources contain little Infrared energy.
"See-in-the-Dark" Infrared capability using a notch (or no) IR-CUT Filter is a trade-off that adversely affects Colour rendition in "Infrared Rich" environments
See in the Dark Infrared Night Vision Day Night CCTV Camera Filter characteristics