Discreet Covert Pinhole Security Camera in PIR Case. This covert discreet hidden PIR security camera is perfect monitoring and recording.

It is versatile and can be used for various applications such as a Nanny Cam to protect your children Cleaner Cam for the home and office or wherever your security could be compromised while you are away.

Colour Security Camera with a 3.7 mm Pinhole Lens in a PIR Case with Mounting Bracket and Cable with Connectors for Video and Power.

Higher Resolution version of this hidden Camera

 
Colour Security Spy Camera disguised as a PIR Detector, conventional IR-CUT Filter for sharper images & better Colour rendition with IR light sources (Daylight, Incandescent Lamps).

Specifically designed to blend with the surroundings in domestic and commercial situations this is easily added to an existing Security Recording system, simply connect Covert-PIR Video Output to an unused Security DVR Video input.

This Security Camera can be easily connected to the Composite Video Input (AV, Yellow RCA socket) on most TVs and Domestic or commercial Recording Devices, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more m.

High Resolution 437 664 Pixel CCD unlike similar cameras (CMOS sensor) this Security Camera has a Sony Charge Coupled Device (CCD) with more than 750 horizontal pixels with significantly higher Sensitivity and higher Signal-to-Noise ratio than a CMOS sensor.

Unlike some cameras this Security Camera utilises the full potential of the 437 664 pixel CCD, it has Wide-Bandwidth Digital Signal Processing capable of producing 540 Horizontal Television Line (540 H-TVL) video output.

Video System: PAL fully compatible with Australian TV System.

Lens: Pinhole Type 3.7 mm, there are no optional lenses for this camera, security camera lens information.

Imaging Device: 795 (H) x 596 (V) 473 820 Pixels 752 (H) x 582 (V) effective pixels ⅓" SONY ICX639BKA Super HAD II CCD.
*CCD=CCD image sensor "Super HAD CCD II" is a trademark of Sony Corporation. The "Super HAD CCD II is a version of Sony's high performance CCD HAD (Hole-Accumulation Diode) sensor with realized sensitivity (typical) of 1000mV or more per 1µm2 (Color: F5.6/ BW: F8 in 1 s accumulation equivalent.)

click on images to enlarge

Imaging Sensor: Active pixels 437 664. Effective resolution 311 040 pixels (based 720x576 DSP output & 0.75 CCD interlace coefficient).

Image Processor: Nextchip NVP2010 ISP (Image Signal Processor).

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, ~ 20 cm cable.

Horizontal Pixels: 720 + (this value is provided for comparative purposes only) Better than Super-VHS near DVD resolution.

Sensitivity: ~ 0.5 lux @ F1.2 (this value is provided for comparative purposes only).

Automatic Electronic Shutter (AES): 1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds, additional information here.

Signal to Noise ratio: ~ 48 dB, measured with AGC Off.

Automatic Gain Control (AGC): Yes.

Back Light Compensation (BLC): Automatic.

White Balance: Automatic.

Spectral Sensitivity: ~ 400 to ~ 700 nm.

Power Requirements: 12 Volts DC Regulated, ~ 80 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+), ~ 20 cm cable.

Dimensions (mm): ~ 60 x 105 x 33, excludes Swivel Mounting Bracket.

Mass: ~ 100 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.

 

Need Sound ? click here