|
Video System: PAL
Colour fully compatible with Australian TV System.
Lens: Pinhole
Type 3.7 mm Focal Length, there are no Accessory Lenses for this
Camera,
additional information
here.
Imaging Device:
1020 (H) x 596 (V)
607 920 Pixels 976 (H) x 582 (V) effective pixels
⅓"
SONY
ICX673AK, 5 µm (H) x 6.25 µm (V) pixel size.
*"EXview HAD CCD Ⅱ" is a trademark
of Sony Corporation. The "EXview HAD CCD Ⅱ" is a CCD that
realizes sensitivity (typical) of 1000mV or more per 1µm2
(Color: F5.6/ BW: F8 in 1 s accumulation equivalent) and
improves light efficiency by including near infrared light
region as a basic structure of Sony’s "EXview HAD CCD".
Imaging Sensor: Active
pixels 568 032. Effective resolution 414 720 pixels
(based 960x576 DSP output & 0.75 CCD
interlace coefficient).
DSP: SONY
CXD4127GG
Effio-E New-Technology Wide-Bandwidth Digital Signal
Processor.
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket, ~ 30 cm cable.
Sensitivity: ~
0.1 Lux @ F1.2, 50 IRE (this
value is provided for comparative purposes only).
Spectral Response: ~ 400
to ~ 700 nm.
Automatic Electronic Shutter
(AES):
1/50 to 1/100 000 second.
Signal to Noise ratio (SNR): 50+
dB, measured with AGC off.
Back Light Compensation (BLC):
Automatic.
Automatic Gain Control (AGC):
Yes.
White Balance: ATW.
Gamma: 0.45.
Power Requirements: 12 Volts
DC Regulated, ~ 90 milliamps, 2.1 x 5.5 mm DC socket, center pin
+,
~ 30 cm cable.
Dimensions (mm): ~ 120 x 70
Main Body.
Mass: ~ 200 grams.

Made in China.
Manufacturer: Established 1997 |