Video System: PAL
Colour fully compatible with Australian TV System.
Lens: Board Type
3.6 mm Focal Length, accessory Lenses:
1.78 FishEye, 2.1, 2.9, 5.7, 8,
12, 16, 25 & 50 mm (BL)
corners of image
may be slightly cropped with 2.1 mm Lens.
1020 (H) x 596 (V)
607 920 Pixels 976 (H) x 582 (V) effective pixels
ICX673AK, 5 µm (H) x 6.25 µm (V) pixel size.
*"EXview HAD CCD II" is a trademark
of Sony Corporation. The "EXview HAD CCD II" is a CCD that
realizes sensitivity (typical) of 1000mV or more per 1µm2
(Color: F5.6/ BW: F8 in 1 s accumulation equivalent) and
improves light efficiency by including near infrared light
region as a basic structure of Sony’s "EXview HAD CCD".
Imaging Sensor: Active
pixels 568 032. Effective resolution 414 720 pixels
(based on 960x576 DSP output & 0.75 CCD
DSP: SONY CXD4127GG
Effio-E New-Technology Wide-Bandwidth Digital Signal
960 Horizontal, 576 Vertical, better than DVD, SDTV, D1
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket, ~ 55 cm cable.
0.1 Lux @ F1.2, 50 IRE (this
value is provided for comparative purposes only).
Spectral Response: ~ 400
to ~ 1000 nm with an Infrared 'CUT' Notch between approximately
720 ~ 830 nm.
For best colour rendition
use light sources with a low or zero infrared component, these
include conventional Fluorescent, Light Emitting Diodes, Compact
Day / Night Infrared
Infrared Night Vision information
Automatic Electronic Shutter
1/50 to 1/100 000 second.
Signal to Noise ratio (SNR): 50+
dB, measured with AGC off.
Back Light Compensation (BLC):
Automatic Gain Control (AGC):
White Balance: ATW.
Power Requirements: 12 Volts
DC Regulated, ~ 90 milliamps, 2.1 x 5.5 mm DC socket, center pin
~ 55 cm cable.
Dimensions (mm) / Weight: ~ 38
x 38, ~ 30 deep with 3.6 mm Lens, ~ 20 grams.
Mounting: ~ 32 or 34 mm centers, ~ 2 mm
Mounting Hardware Screw/Nut/Spacer/Bush Paks
Made in China.
Manufacturer: Established 1997