About Pixim: Pixim Inc.
has developed unique imaging technology that revolutionizes the way
video cameras capture and process images. Unlike traditional image
capture technologies, where each pixel cannot adjust to highlights
and lowlights in the same scene, Pixim's patented Digital Pixel
System® technology empowers hundreds of thousands of pixels to act
like individual cameras constantly self-adjusting. This all-digital
system enables Pixim-powered cameras to efficiently capture the
whole picture, regardless of lighting condition or application -
thus securing the highest resolution, natural color and clarity,
while automatically eliminating image-compromising visual noise
(e.g., glare, reflections). The result is more than superb image
quality; it is accurate, actionable information that gives users the
strength of certainty. Seawolf
Seawolf Solution (768x548 Pixels)
758(H) 540(V) 409 320 Active Pixels
⅓" format 7 µm x 7 µm pixel size, CMY
PIXIM® Wide Dynamic
Digital Pixel System®
Lens: C or CS Mount, Lens is
NOT INCLUDED with this Camera,
compatible lenses are: C Mount (with
C-Spacer), CS Mount, Fixed, Manual Iris & Auto Iris 1/3" & 1/2"
security camera lens.
Video System: 2:1 Interlace
switchable between PAL 50/625
NTSC 60/525. PAL 50 Hz
vertical, 15 625 Hz horizontal. Compatible with TV Systems in
Australia, NZ, UK, USA, Japan, etc.
Video Output: Composite Video 75 ohms
1.14 V p-p,
suitable for TV, DVR, VCR, AV & Video inputs in Australia, NZ, UK,
USA, Japan, etc.
690 HTVL-E better than Super-VHS near
HTVL Effective Specification &
Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems
Horizontal Resolution: 540
this value is provided for
comparative purposes only.
Vertical Resolution: 460
this value is provided for
comparative purposes only,
significantly better than conventional interlaced CCD sensors.
Lux @ F1.2, 50 IRE, 25 fps, CMY,
value is provided for comparative purposes only.
Automatic Electronic Shutter (AES):
1/30 720 second.
Dynamic Range (more):
102 dB typically, 120 dB maximum,
Dynamic Range is illustrated on this page.
Zero for most practical purposes, copes with highlights better than
ordinary CCD cameras,
Smear illustrated on this page.
Signal to Noise ratio (SNR): up to 50
dB, measured with AGC off.
Light Compensation (BLC): Automatic, On/Off.
Reduction: 3D, Motion Adaptive.
Flicker Reduction: 'Pixim' Enhanced Flicker
On-Screen-Display Setup: All
menu functions and parameters are easily set via
Up/Down/Left/Right/Enter push button on back of Camera.
to ongoing product development all or
some of the functions listed
may not be available with this
"WDR Mode" Normal, Indoor, Outdoor,
Fluro 1, Fluro 2.
"Exposure" Gain Mode:
AGC Low, Medium, High, Custom Bias 37 increments Limit
61 increments, Manual 102 increments, Slow Shutter 2X
to 32X, 5 increments. WD Range:
Auto, Manual 10 increments. Backlight Zone:
On 21 x 14 positions, Off. Transitions:
Normal, Fast, Slow.
"White Balance" Mode:
ATW Extend, ATW Normal, ATW Desat, AWB, Manual Colour-Temp
90 increments, Red & Blue 40 increments. Magenta Ctrl:
On, Off, Custom 100 increments. WB Bias:
40 increments. Transitions:
ATW Slew 100 increments. Hysteresis 100 increments.
On, Off. Gamma Mode: Auto,
Off, Manual 75 increments. Sharpness:
Detail Boost Auto, Off. Noise Reduction On, Off.
Sharpness 16 increments. Aperture 16 increments.
Chroma: Bias: 16 increments.
Resolution: Normal 1, Advanced 1,
Normal 2, Advanced 2.
"Setup" Video I/O:
TV System PAL, NTSC. Video Level 8 increments.
Colour Bars On, Off.
Int, Int2, Line-Lock 625 increments. ID Setup:
On, Off. Characters 8. Position Up-left, Up-center,
Up-right, Down-left, Down-right. Day Night Setup:
D/N Ctrl *Auto, Colour,
Mono. Gain Boost On, Off. AI Threshold:
"Save/Restore" Restore User Settings, Save User Settings, Restore
Factory Settings, Reset Camera.
Requirements: 12 Volts DC Regulated, ~ 150 milliamps, 2.1 x 5.5 mm
DC socket, center pin = (+).
(mm): ~ 70 x 56 x 136.
18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM &
ODM supplier. Made in China.