|
|
![]()
|
|
![]() |
|
|
|
|
|
||||
|
|
||||
|
|
||||
|
|
||||
for
comprehensive specifications.
Video System: PAL
Colour fully compatible with Australian TV System.
795 (H) x 596 (V) 473
820 Pixel LOW BLEMISH
1/4" inch SONY Super HAD MicroLens Interline Transfer CCD Sensor.
for:
Super HAD MicroLens information @ "SONY"
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation:
Internal.
Video Output (1): 1.14
V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC
socket.
Video Output (2):
S-Video (Y/C), Luminance 1 v p-p 75 ohms, Chrominance 0.3 v p-p Burst 75 ohms, 4
pin Mini-DIN socket.
Lens: CANON Motorised
Focus/Zoom/Iris, 22X Optical ZOOM, F1.6 ~ F3.8, focal length 4 mm ~ 88 mm,
Automatic Iris, Automatic / Manual Focus, 64 Zoom/Focus Positions.
Horizontal Resolution:
~ 700 pixels (this value is provided for comparative purposes only) Better than
Super-VHS resolution.
Minimum Illumination: ~
1.5 lux @ F1.2 (5600º Kelvin), ~ 0.02 lux @ F1.2 (5600º Kelvin ) using Frame
Integration (these values are provided for comparative purposes only) ** Due to
the nature of Frame Integration clear images of moving objects may not be
possible.
Automatic Electronic
Shutter (AES): 1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds.
Automatic Gain Control
(AGC): 18 dB Max.
Signal to Noise ratio:
Typically 52 dB, minimum 48 dB, measured with AGC off.
Back-Light Compensation
(BLC): 48 Zones.
White Balance: ATW /
AWB / FIX.
White Balance Range:
ATW 3200º ~ 9 600º Kelvin. AWB/FIX 3200º Kelvin.
Negative Image: On /
Off via OSD.
Power Requirements: 12
Volts DC Regulated, ~ 300 milliamps, via two Screw Terminals.
Dimensions: ~ 59 mm
Wide, ~ 80 mm High, ~ 120 mm Deep, ~ 450 grams.

Made by Taiwan's largest Camera maker in an ISO 9001 & ISO-14001 certified
factory.
Manufacturer's Experience: 23 + Years.
for:
RS232 Interface Serial Protocol Info
Note: Access to
On-Screen-Display Set-Up menu is via four Push-Buttons on rear of Camera.
RS232C (Com 1) Serial
connection may be used together with "Camera Adj" application screenshot below
to access most functions.

Screen-Shot of Camera-Adjust application. (Camera to Com 1 interconnection is
via 2 wires + ground)

Remote Control & RS232C Com 1 Port Wiring Diagram