|
Video
System: PAL Colour fully compatible with Australian TV System.
Image Device:
976(H) x 582(V)
568 032 Pixel ⅓"
SONY
ICX673AK, 5 µm
(H) x 6.25 µm (V) pixel size.
*"EXview HAD CCD Ⅱ" is a trademark
of Sony Corporation. The "EXview HAD CCD Ⅱ" is a CCD image
sensor that realizes sensitivity (typical) of 1000mV or more per
1µm2 (Color: F5.6/ BW: F8 in 1 s accumulation
equivalent) and improves light efficiency by including near
infrared light region as a basic structure of Sony’s "EXview HAD
CCD".
DSP: SONY
CXD4127GG
Effio-E New-Technology Wide-Bandwidth Digital Signal
Processor.
Lens:
C or CS Mount, Lens not included. Compatible
lenses are: C Mount (with
C-Spacer), CS Mount, Fixed, Manual Iris, Auto Iris
& IR focus-shift
corrected on
this page,
EXCEPT CC40.
Use a Megapixel
lens to maximise image sharpness - additional
Lens information
here.
Setup: On Screen Display,
menu driven via 5 push-buttons on Back of Camera
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation:
Internal.
Video Output: 1.14 V
p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, 2 x BNC sockets.
Sensor/DSP
Resolution:
960H/Effio-E
650+ HTVL-E
better than Super-VHS, SDTV, DVD resolution.
Whitepapers:
HTVL Effective Specification &
Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems
Sensitivity: ~
0.03 Lux @ F1.0 without IR-CUT Filter, (this
value is provided for comparative purposes only)
Camera produces images in total darkness with an
Infrared Illuminator.
Day Night: Motorised
movable Infrared Cut Filter (IR-CUT) Automatic (Filter moves
based on illumination level), Colour (Filter permanently in
optical path), Monochrome (Filter permanently out of optical
path).
Movable Infrared Optical
Filter: Automatic switching based on
illumination level (adjustable).
In Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between
Lens and Image Sensor to exclude Infrared radiation that would
otherwise adversely affect colour reproduction, this ensures
colour rendition not possible with
ordinary non-filtered or notch-filter type Day/Night cameras.
more
In Night mode (low light, monochrome)
mechanism automatically removes IR-CUT
optical filter allowing Infrared radiation to pass boosting low
light and Infrared sensitivity, the result is significantly
better night images using an
Infrared Illuminator or with Infrared
rich light sources.
Infrared Response
without Infrared filter is ~ 700 to ~
1100 nm better than a
'CCTV
notch IR Filter',
additional
CCTV Infrared Night Vision information.
Wide Dynamic Range: ATR
Digital (Adaptive Tone-curve Reproduction) 128X.
Automatic Electronic Shutter
(AES):
1/50 to 1/100 000 second.
Manual Shutter Speed:
1/50,
1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 second,
ideal for fast moving subjects
Licence Plate Capture,
etc.
Signal to Noise ratio (SNR): 52+
dB, measured with AGC off.
Back Light: HLC, BLC, Off.
Flickerless: On/Off.
Automatic Gain Control
(AGC): Automatic 4 levels.
White
Balance: ATW, Push, User1, User2, Anti CR, Manual, Push Lock.
Noise Reduction: Dynamic, 2D.
Gamma: 0.45.
Power Requirements:
Power Requirements: 12 Volts DC Regulated or 24 volts ac, ~ 3
Watts, via Press-to-Release Terminal Block.
Dimensions (mm): ~ 120
x 68 x 51.
Mass (grams): ~ 350.
to view 'User's Manual'

Made in Taiwan in an ISO 9001
certified factory.
Manufacturer: Established 1976
|