HD CCTV Security
Surveillance Cameras 33% more pixels than DVD SDTV D1 & traditional
CCTV Sony's best ½+ million pixel EXview Super HAD CCD II
new 960H SONY Technology "568
032 Pixel CCD"
+
"Wide-Band Extra High Resolution enhanced Effio-E DSP" in a CS Mount
professional Box style Camera with extraordinarily High Resolution
|
|
|
|
Surveillance
Camera with 960H ExView Super HAD CCD II from Sony that
eclipses earlier devices with 33% more Pixels and a
Wide-Bandwidth Digital-Signal-Processor that extends
resolution to 650+ HTVL-E.
For Extra High Resolution images - ideal for
Showrooms, Offices, Warehouses, Homes, Factories, etc.
|
|
|
OPTIONS
|
|
|
|
|
|
|
|
|
|
|
|
Microphones better than inbuilt microphones
from $5 |
Extra High Resolution, Extra High Quality &
Higher Signal-to-Noise Ratio.
This Surveillance Camera is perfect for
monitoring
&
recording,
a wide range of lenses is available to provide 25 m wide shots
@ 15 m or Full-Screen "Head & Shoulders" or "Cash Drawer"
shots at around 15 m. |
| |
|
Extra High 650 HTVL-E
Resolution ! Better Colour Rendition ! Higher SNR |
Pictured with Optional Auto-Iris Lens |
|
New 568
032 Pixel 1/3" SONY Effio CCD & wide-band DSP with
enhanced functions & menu-driven On-Screen Setup
Use
out-of-the-Box or tailor parameters via push-button
menu-driven On-Screen Setup
Be ready for
960H
new generation of Security DVRs & Network devices
info |
|
|
|
|
|
|
This
Surveillance
Security Camera
utilises new CCD & DSP technology that improves resolution,
colour rendition, signal to noise ratio, reduces false colour
noise, it is ideal for most common Surveillance applications.
Built with Sony's latest processor, this wide
dynamic camera is capable of achieving resolutions of over
650TVL. Features include 2D noise reduction, spot removal,
strong-light suppression and
menu-driven OSD setup.
Specifically designed for surveillance in commercial and
domestic situations this Camera can be easily added to an
existing
Surveillance
Security Recording
system (or replace an under performing Camera), simply connect
Video Output from Camera to an unused
Security DVR
Video input.
Connect this Surveillance
Camera to the Composite Video Input (AV, Yellow RCA socket) on
most TVs and Domestic or commercial Recording Devices, if
required a
Microphone can be easily added and a
single small diameter
Cable
used to carry Video, Audio & Power 20 or more m.
Powered by Sony's
960H EXview Super HAD II CCD &
Effio DSP this Security Camera is capable of an
extraordinary 650+ HTVL effective resolution, far better
than a traditional Security Camera,
HTVL Effective Specification.
|
| All values are
approximate. |
@
3 m |
@
5 m |
@
9 m |
@
15 m |
| Width of Vision
with 2.8 mm Lens |
4.9 m |
8.2 m |
14.8 m |
24.8 m |
| Width of Vision
with 8 mm Lens |
1.8 m |
3
m |
5.4 m |
9
m |
| Width of Vision
with 12 mm Lens |
1.2 m |
2
m |
3.6 m |
6
m |
| Width of Vision
with 60 mm Lens |
0.24 m |
0.4 m |
0.72 m |
1.2 m |
| Width of Vision
with 80 mm Lens |
0.18 m |
0.3 m |
0.54 m |
0.9 m |
| Width of Vision
with 100 mm Lens |
0.14 m |
0.24 m |
0.43 m |
0.72 m |
| Additional
Camera Lens
information |
|
|
|
|
Video System: PAL Colour fully
compatible with Australian TV System.
Lens: C or CS Mount, Lens not included, compatible
lenses are: C Mount (with
C-Spacer), CS Mount, Fixed, Manual Iris, Auto Iris on
Camera Lenses
page, Use a
Megapixel lens
for maximum sharpness -
Camera Lens information.
Image
Device:
1020 (H) x 596 (V)
607 920 Pixels 976 (H) x 582 (V) effective pixels ⅓" SONY
ICX673AK, 5 µm (H) x 6.25 µm (V) pixel size.
"EXview HAD CCD Ⅱ" is a trademark
of Sony Corporation. The "EXview HAD CCD Ⅱ" is an CCD that
realizes sensitivity (typical) of 1000mV or more per 1µm2
(Color: F5.6/ BW: F8 in 1 s accumulation equivalent) and
improves light efficiency by including near infrared light
region as a basic structure of Sony’s "EXview HAD CCD".
Image Sensor: Active pixels 568 032. Effective resolution 414
720 pixels (based 960x576 DSP output & 0.75 CCD
interlace coefficient).
DSP: SONY CXD4140GG enhanced
Effio-E New-Technology Wide-Bandwidth Digital Signal
Processor.
On-Screen-Display Setup:
Camera parameters are easily set via push-buttons on Back of
Camera.
EffioE On-Screen-Setup functions important all or
some functions described may not necessarily be available with
this Camera.
Scanning System: 2 : 1 Interlace,
PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, 2 x BNC sockets.
Sensitivity: ~
0.1 Lux @ F1.0, (this
value is provided for comparative purposes only).
Spectral Response: ~ 400
to ~ 1000 nm with an Infrared 'CUT' Notch between approximately
720 ~ 830 nm.
For best colour rendition use
light sources with a low or zero infrared component, these
include conventional Fluorescent, Light Emitting Diodes, Compact
Fluorescent.
Colour
Day / Night Infrared
Infrared Night Vision information.
Wide Dynamic Range: ATR Digital (Adaptive Tone-curve
Reproduction) 128X.
Automatic Electronic Shutter
(AES):
1/50 to 1/100 000 second.
Our recommendation: Auto
Signal to Noise ratio (SNR): 48+
dB, measured with AGC off.
Back Light Compensation: Yes.
Automatic Gain Control (AGC):
Yes.
White Balance: ATW.
Spectral Sensitivity: ~ 400 to ~
700 nm.
Noise Reduction: Dynamic, 2D.
Gamma: 0.45.
Power Requirements: Power
Requirements: 12 Volts DC Regulated, ~ 95 milliamps, via
Press-to-Release Terminals.
Dimensions (mm): ~ 118 x 61 x 53,
excludes BNC Video Output Socket.
Mass (grams): ~ 230.
Made in China.
Manufacturer: Established 1997
|
|
|
|
|
A Colour Day Night
CCTV Camera with an inbuilt Infrared
Illuminator "See-in-the-Dark" and produce images when visible
illumination is zero.
At average levels of
illumination these produce Colour images,
depending on their sensitivity (Lux) at low illumination levels and in
total darkness the image is Monochrome.
These Cameras
generally have a relatively high sensitivity image sensor and
Fixed Iris
Lens therefore under high illumination levels images will be
overexposed for the reasons outlined
here.
An ordinary CCTV
Colour Camera is relatively insensitive to Infrared because they have an
IR CUT Filter between the Lens and Image Sensor, this filter excludes
Infrared radiation with a wavelength greater than ~ 700 nm that would
otherwise adversely affect White Balance, Colour Rendition and Image
Sharpness.
Day / Night Colour
CCTV Cameras are sensitive to Infrared because they either do not have
an IR CUT Filter or utilise a special NOTCH IR CUT Filter that excludes
the wavelengths most harmful to colour quality (720 ~ 830 nm) from
reaching the Image Sensor.
A Colour Camera that
does not have an IR CUT Filter usually has
poor colour rendition characterised by a
Pink-Red
'tint' when the illumination is InfraRed rich, use
of a 'Notch' Filter helps however White Balance, Colour Rendition and
Image Sharpness are compromised for Infrared sensitivity. (Image
Sharpness can be restored by using a specially designed Lens that
corrects for focus shift between Visible and Infrared)
The IDEAL Day / Night
Infrared Sensitive Colour CCTV Camera utilises a Lens with an
Automatic
Iris to cope with high illumination levels - has a large aperture
(low 'F' number) to maximise light transmission and is corrected for
Infrared:Visible focus-shift, it also utilises a Traditional IR CUT
Filter when illumination levels are adequate for Colour and REMOVES the
IR CUT Filter when levels are low our
Maxi Cameras
have these features and
are recommended for OPTIMUM results.
Infrared rich light sources include Daylight and most Filament
type lamps including common Spot lamps, Tungsten lamps, Halogen lamps,
etc.
The majority of Light
emitted from 'Cold' type sources such as Fluorescent, Mercury Vapour,
Sodium Vapour, etc., is visible, these sources contain little Infrared
energy.
"See-in-the-Dark"
Infrared capability using a notch (or no)
IR-CUT Filter is a trade-off that adversely affects Colour rendition in
"Infrared Rich" environments.
|
|