Worldwide Air Delivery
|
|
O'Nite Delivery
|
|
|
| OPTIONS |
| with 8, 12 or 16 mm C-Mount Fixed Iris Lens + $25 * C-SPACER required for C-Mount Lenses $10 |
| Microphone & Preamplifier better pick up than most inbuilt microphones $20 |
| Cat Code: REG12/1.0A Regulated 12 VDC 1 Amp Plug Pack to suit $20 (Use with Cable-2155/Skt) |
| Cat Code: Cable-VP/R1.5 Special Video & Power 20 metre Cable $40 (Use with Cable-2155/Skt) |
| Cat Code: BNC-RCA Adaptor use with Cable-AVP above $2 |
| Cat Code: BRKT-221 Swivel Mounting Bracket $8 |
| High-Quality Japanese CS Mount Lenses These Lenses produce Sharper images and pass more than twice the light compared to an ordinary Fixed Iris C Mount Lens, use these to vastly improve the Low-Light performance of Camera / Lens combination and for Lower-Noise images, click here for more information. |
|
|
| All values are approximate. | @ 3 metres | @ 5 metres | @ 9 metres | @ 15 metres |
| Width of Vision with 2.8 mm / 3 mm Lens | 4.9 metres | 8.2 metres | 14.8 metres | 24.8 metres |
| Width of Vision with 8 mm Lens | 1.8 metres | 3 metres | 5.4 metres | 9 metres |
| Width of Vision with 12 mm Lens | 1.2 metres | 2 metres | 3.6 metres | 6 metres |
| Width of Vision with 50 mm Lens | 0.29 metres | 0.48 metres | 0.86 metres | 1.4 metres |
| Additional Lens selection info here |
Video System: PAL Colour fully compatible with Australian TV System.
Image Device: 752 (H) x 582 (V) 437 664 Pixel LOW BLEMISH 1/3" Sony CCD image Sensor.
for:
ICX409AK Image Sensor info @ "SONY"
Lens: C or CS Mount, Lens is NOT SUPPLIED with this Camera, compatible lenses are: C Mount (with C-Spacer), CS Mount, Fixed, Manual Iris & Auto Iris 1/3" & 1/2" types on this page, EXCEPT Cat Codes: CC21, CC25, CC21IRC, CC40, CS25MI & CS25AIDC, additional information here.
Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal or Line Lock (24 vac operation).
Video Output: 1.14 v p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket.
Horizontal Resolution (Pixels): ~ 600 (Day mode - Colour) ~ 700 (Night mode - Mono), this value is provided for comparative purposes only. Better than Super-VHS resolution.
Minimum Illumination: ~ 0.5 lux (32 X using Digital-Slow-Shutter Frame Integration) @ F1.0, 3200º Kelvin with AGC = On, this value is provided for comparative purposes only.
Wide Dynamic Function: User configurable via On-Screen Setup - High - Normal - Custom Off.
Camera ID Title: User configurable via On-Screen Setup up to 12 Characters.
RS485: Control of On-Screen Setup functions, Up, Down, Left, Right, Enter, Display Menu, Exit.
Movable Infrared Optical Filter: Switchable On/Off, when 'On' Colour-Killer is activated when IR CUT Filter is removed.
When set to 'On' mechanism automatically positions optical filter between Lens & Image Sensor (Day, well lit) to exclude Infrared radiation that would otherwise adversely affect colour reproduction, this ensures colour rendition not possible with ordinary non-filtered or notch-filter type Day/Night cameras.
When set to 'On' mechanism automatically removes optical filter to allow Infrared radiation to pass in monochrome (Night, low light) boosting low light and Infrared sensitivity, the result is significantly better night images when used with an Infrared Illuminator or Infrared rich light sources. Infrared Response without Infrared filter is ~ 700 to ~ 1100 nm better than a 'notch' filter, additional information here.
When 'On' Switch-Over/Colour-Killer points are: Colour to Monochrome ~ 3 Lux, Monochrome to Colour ~ 7 Lux. Switch-Over includes an ~ 5 second delay to suppress changes due to spurious illumination changes.
Automatic Electronic Shutter (AES): 1/50 to 1/100 000 second, 20 milliseconds (see Frame-Integration below) to 10 microseconds, additional information here.
Frame-Integration Digital Slow Shutter: User configurable via On-Screen Setup - Off - up to 32 X (~ 640 milliseconds).
Automatic Iris (AI) Lens Output: DC Drive, common 4 pin socket.
Automatic Gain Control (AGC): User configurable via On-Screen Setup On/Off.
Signal to Noise ratio: ~ 48 dB, measured with AGC off.
Back-Light Compensation (BLC): User configurable via On-Screen Setup On / Off.
Power Requirements: 12 Volts DC Regulated ~ 300 mA (~ 800 mA Peak) or 24 volts ac ~ 4 Watts, via Screw Terminal Block. Consider cable resistance when installing, ask us about solutions if voltage drop is a problem with existing wiring. (Cable-2155/Skt 2.1 x 5.5 mm Socket on Cable for use with 20 Metre Cable or Power Supply)
Dimensions: ~ 67 mm Wide, ~ 71 mm High, ~ 127 mm Deep, excludes I/O sockets/connectors, ~ 380 grams.
Made in Taiwan in an ISO 9001 certified factory.
Manufacturer's Experience: 10 + Years.
User Setup info page for CCS-IRdnWD this is a PDF file that will open in new Window.

Need Sound ? click
here
Ancillary Products
|
low-cost Flexible Twisted Pair Cat-5
Telephone Cable Power-Up-Cable |
|||
| TV/VCR INTERFACE MODULE | Things | ||
| Infra-Red Illuminators | Filters | ||
| BUNDLED-PAKS | PC Related Products | Lenses |
Use your Browser "Back Button" to return to previous page