Two-Wire 100 Device  PELCO compatible RS485 Receiver

BULK BUY Price click on TRUCK for more information $59 Bulk Buy CCTV 20 +

Remote RS485 Receiver for driving Pan / Tilt / Zoom / Focus / Auxiliary Device - 2-Wire up to 1200 metres.

100 Channels / Addresses * Up to 100 Receivers via 2-Wires Daisy-Chained

Two-Wire 100 Device  PELCO-D compatible RS485 Receiver

Two-Wire PELCO compatible RS485 Receiver

Compatible with: 2-Wire 32 Channel Joystick Controller also available IP65 Weatherproof Version

Control: Pan / Tilt / Zoom / Focus / Auxiliary: Washer - Light - Lock - IR Illuminator - Etc - Etc

Protocol:
 
PELCO-D 2400 bps
Pan & Tilt Output:
 
Auto / Up / Down / Left / Right, voltage*
Lens Zoom / Focus Output:
 
12 Volts DC (polarity reverses)
Auxiliary Control:
 
Normally Open dry contacts 24 VDC 2 Amp maximum
Power Requirements:
 
12 VDC 120 mA 2.1 x 5.5 mm DC socket center = + Power Supplies
Interconnecting Cable:
 
Shielded 120 ohm impedance Twisted Pair Cat-5, Cat-6, etc, 1200 metres maximum
Pan / Tilt Power Input:
 
24 ~ 240 volts ac to match Pan / Tilt Motors*
RS485 Input:
 
via Screw Terminals
Dimensions:
 
~ 138 x 77 x 28 mm
Address Range:
 
100 (0 ~ 99)
Input/Output
 
via Plug on ~ 1000 mm stripped & tinned Wires

Two-Wire PELCO RS485 Receiver

Use REG-12VDC to Power above from the same 24 vac Power Supply used to power 24 vac Pan / Tilt unit.