Cat Code: PAN-402/24 (24 vac) (Net) $99

Cat Code: PAN-402/240 (240 vac) (Net) $99

Cat Code: Power Supply 24 vac power supply (Net) $30

May be wired for continuous Automatic back-and-forth operation between preset adjustable stops or via a Switch (Manual / Automatic) and two Push-Buttons (Left / Right) for manual panning.

Rotation Angle: 360 degrees maximum with both stops removed.

Tilt Range:
Upright Mount ~ 10 degrees Up, ~ 90 degrees Down.
Inverted Mount ~ 10 degrees Down, ~ 90 degrees Up.

Pan Speed: ~ 4 degrees per second.

Adjustable Stops: each 5 degrees except for a 15 degree section.

Maximum Camera Load: 7 kilograms.

Power Requirements: 24 vac, ~ 140 milliamps or 240 vac ~ 14 mA, 50 Hz ! SPECIFY 24 or 240 WHEN ORDERING !

Cable: ~ 750 mm, 4 conductors, Common - Automatic - Left - Right. Supplied with 4 pin polarised Plug & Socket.

Camera Connection: via BNC Male Plug & Coiled cable, BNC Output Socket on base.

Construction: Plastic & Steel, Light Grey Textured finish.

Dimensions: 115 mm High, 119 mm Diameter, ~ 0.9 kilograms.

CCTV Camera Bracket

click here for: Pan & Tilt unit & Controller

Cat Code: Pan/Tilt-Ctl

$49 (Nett)

Low-Cost Economy Wired Pan & Tilt Controller also suitable for Pan / Scanners.

* click here for: Wireless Controller

Pan Left / Right: Center-Off spring loaded Switch.

Tilt Up / Down: Center-Off spring loaded Switch.

Manual / Off / Auto: 3 position Switch.

Indicator: Red LED lit when switched to Manual / Auto.

Construction: Metal Case, Silver/Grey colour.

Input Voltage: 240 vac 50 Hz via 1500 mm cable with 3 pin Mains Plug.

Output Voltage: 24 vac via 6 pin Socket matching Plug included, Common - Auto (Pan) - Up - Down - Clockwise - Counter Clockwise.

Construction: Metal Case.

Dimensions: ~ 50 (H) ~ 150 mm (W) ~ 200 (D), ~ 1.55 kg.