
Quick-Install Automatic Focus Motorised
22X Optical Zoom Colour Camera easy Menu driven Push-Button
On-Screen-Setup ¼"
SONY Super-HAD CCD Image Sensor
|
|
|

|
¼"
SONY Super-HAD CCD Image Sensor
22X
Optical Zoom | Automatic Focus
~ 48
dB Signal:Noise Ratio | ~ 1 Lux | 500 + H-Pixels
Versatile 3.9 ~ 85.8 mm Variable Focal-Length
Zoom Lens
Full-Screen 'Entry' 2 m wide shots @ 40+ metres
RS485 Pelco-D compatible or 'Wired' Remote Control
|
|
Fully self contained Colour Security
Camera Automatic-Focus Motorised 22X Optical Zoom, simply
Plug-In & View.
Versatile
3.9 ~ 85.8 mm Variable-Focal-Length Lens.
Full-Screen
0.6 m 'Head
& Shoulders' or 'Cash
Drawer' shots
@ 15 m.
Full-Screen
'Entry'
2 m wide shots @ 40+ m.
Wide 13.8 m
shots @ 15 m.
Ideal for fixed applications or easily re-locate it
using push-button Zoom Lens for desired shot, Automatic Electronic
Shutter for exposure control. Easy push-button On-Screen Setup to
tailor parameters and cope with problem situations.
Order
Code: [22X-ZoomAF]
$199
$132 < 10 + >
Accessories
[BRKT-220]
Swivel Mounting Bracket $8
[REG12/1A]
Security Camera Power Supply
$20
[Cable-VP]
20 m Security Camera Cable
$30
Security Camera Microphone
$20
|
All
values are approximate. |
@ 3 metres |
@ 5 metres |
@ 9 metres |
@ 15 metres |
Width of
Vision @ 3.9 mm setting |
2.7 metres |
4.6
metres |
8.3 metres |
13.8 metres |
Width of
Vision @ 85.8 mm setting |
0.13 metres |
0.21 metres |
0.38 metres |
0.63 metres |
Security Camera Lens information |
|
|
|
|
Automatic Focus 22 times 'Optical' Zoom Security Camera High
Sensitivity High Signal to Noise ratio
¼"
Sony
CCD Image Sensor - Wide Band DSP. This Security Camera is
suitable for most common Surveillance applications, it can be
'named' (programmable Title) for easy identification in multi
Camera installations.
Suitable for fixed applications but easily
re-located just press-buttons to Zoom in/out for desired shot,
focus and walk-away Automatic Electronic Shutter takes care of
varying light levels. If required easy Menu driven On-Screen
Setup can be used to tailor settings for difficult or unusual
situations. Ideal for domestic and commercial Security and
easily added to an existing Security Recording system simply
connect Video Output from Camera to an unused
Security DVR
Video input.
Connect this Security Camera to the Composite
Video Input (AV, Yellow RCA socket) on TVs and Domestic or
commercial Recording Devices, if required a
Microphone can be easily added and a
single small diameter
Cable
used to carry Video, Audio & Power 20 or more metres.
297 984 Pixel
CCD Image Sensor
unlike similar cameras (CMOS sensor) this Security Camera has a
Sony Charge Coupled Device
(CCD) Image Sensor with significantly higher
Sensitivity and higher Signal-to-Noise ratio than
an a
CMOS
sensor.
|
to
view 'User Manual'
|
Video System: PAL Colour fully
compatible with Australian TV System.
Image
Device: 512 (H) x 582 (V) 297 984 Pixel
¼" Sony Super HAD CCD Image
Sensor.

Lens: Motorised Focus/Zoom, 22X
Optical ZOOM, focal length 3.9 mm ~ 85.8 mm, Automatic Focus.
Scanning System: 2 : 1 Interlace,
PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p
Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket.
Horizontal Pixels: 500 +, this
value is provided for comparative purposes only, Better than VHS
resolution.
Sensitivity: ~ 1 lux @ F1.2 50
IRE, this value is provided for comparative purposes only.
Automatic Electronic Shutter
(AES): 1/50 to 1/100 000 second.
Automatic Gain Control (AGC): Max
18 dB.
Signal to Noise ratio: ~ 48 dB,
measured with AGC off.
White Balance: ATW / AWB / FIXED,
3 200
~ 9 600ºK.
OSD Control: Five push-Buttons on Back of Camera
- Menu (Return), Zoom+ (Up), Zoom- (Down), Focus+ (Right),
Focus- (Left).
Input/Output: DB9 socket, Pin 1 Gnd (-), Pin 2
TXD, Pin 3 RXD, 4 Gnd (-), Pin 5 Menu, Pin 6 12 V +, Pin 7 Lens
Com, Pin 8 Zoom, Pin 9 Focus.
RS485: PELCO™-D
Protocol 2400 bps for control of Zoom, Focus & On-Screen setup.
Power Requirements: 12 Volts DC
Regulated, ~ 250 milliamps, via press-to-release Terminals.
Dimensions (mm): ~ 61 x 71 x 114,
includes 1/4" UNC Tapped Mounting Block on Base (Camera
Mounting Brackets), excludes I/O sockets.
Suggested Settings:
(1) First: Reset Camera to Default.
(2) Focus: 'Kctl' or 'Manual' for most static applications -
'Auto' for dynamic & PTZ applications. May require some trial
& error to determine best setting in some situations.
(3) AES: 'Auto' for most situations - 'Fixed' for fast motion.
(4) Day Night: 'Auto' to eliminate Colour-noise in low light -
'Colour' to identify coloured indicators, Traffic Lights, etc.
(5) BLC: 'Off' except in Back-Lit situations such as Entrances,
Windows, etc where Daylight or other Strong Lighting is behind
subject.
To clear
WAIT
message Power Camera Off for 10 seconds then On again to
re-boot.
Mass: ~ 350 grams.
Manufacturer:
Over 18 years experience. ISO 9001, CE, FCC, RoHS certification.
OEM & ODM supplier.
Made in China.
|

Need Sound ? click
here
|
|
|
|
|
|