Applications
Suitable for portable discreet /
covert Surveillance and a virtually unlimited number of Monitoring /
Recording locations using multiple Receivers.
Business: Observe
showrooms, warehouse, offices, doors, etc without the need to
install expensive and inflexible wiring, use up to 4
camera/transmitters and any number of Receivers.
Home: See who is outside
your door - use your TV as a monitor * Monitor your baby, your
children, the swimming pool, the elderly, ill or disabled * Monitor
your home with up to four cameras.
Camera-Transmitter
(TX-CAM2p)
Colour CCTV Video
Camera with
Pinhole Lens - PAL TV system.
Image Sensor: 1/4 inch
LOW BLEMISH CCD, 512 x 582 pixels.
Lens: Pinhole Type 5.5 mm Focal Length, there are no Accessory
Lenses for this Camera,
additional information
here.
Sensitivity: ~ 3 lux @ F1.2 (this value is provided for comparative
purposes only).
Signal : Noise Ratio ~ 48 dB.
Resolution: ~ 440 Horizontal Pixels (this value is provided for
comparative purposes only).
Automatic Electronic Shutter: 1/50 ~ 1/100 000 second, 20 ms ~ 10
microseconds, additional information
here.
Video Transmitter ISM
Band: 2.4 ~ 2.483 GHz 4 Channel.
Modulation Method: FM.
Oscillator: P.L.L. (Phase Locked Loop).
RF Output Power: 10 mW EIRP (maximum allowed) with 3 dBi Mini
Antenna, 50 ohms impedance, SMB RF connector.
Power Requirements: 12 VDC Regulated, 2.1 mm x 5.5 mm
socket, center pin = (+),
Current: ~ 160 mA.
Dimensions: ~ 69 mm (L), ~ 32 (W), ~ 28 mm (H), excluding antenna.
Antenna ~ 62 mm long, ~ 6 mm diameter. Total weight ~ 60 grams.
Channel
Select (DIP Switch) info:
here
Compatibility:
Video transmissions may be received with
RX-Mon7 &
RX-Mini.
Receiver (RX-Mini)
Video Output: Standard
Composite Video 1 v p-p, 75 ohm impedance via 2.5 mm mini socket &
1.5 metre cable with RCA Plug.
Single channel selection or Automatic Sequential Switching with ~ 4
second dwell.
Audio Output: Line Level, via 2.5 mm mini socket & 1.5 metre cable
with RCA Plugs.
Power Supply Requirement: 9 ~ 12 VDC, 1.3 mm x 3.8 mm
DC socket, center pin = (+).
Current: ~ 180 mA @ 10.5 Volts.
Sensitivity: -92 dbm.
Dimensions: ~ 52 mm (W) 60 mm (H) 20 mm (D) excluding sockets &
antenna. ~ 40 grams.
Compatibility: Receives transmissions from:
TX-Compact,
TX-AV1000,
TX-CAM2p,
TX-Module, TX-MOD
2, TX-MOD 3, TX-ELECTRET, TX-BNC, TX-AV050, TX-AV500, TX-AV2000,
TX-CAM2 & TX-CAM3.
Connection info:
here
RANGE
Depends on
Surroundings, Obstructions, other Transmitters (2.4 GHz Cordless
Phones, Wireless LAN, etc), Antenna Alignment, Electromagnetic
& Radio Frequency interference in the vicinity. This device may be
affected by and may affect other devices that operate on or near the
same frequency causing minor to severe interference.
In ideal,
clear, Line-of-Sight conditions
Vertical 5
dBi Whip antenna on Receiver up to ~ 100 metres.

Correctly
matched and aligned 24 dBi antenna on RX up to ~ 1 000 metres.

Due to the nature of Radio Signals results are unpredictable (in the
same manner as Mobile / Cellular Telephones) signals reflected from
surrounding objects arriving at Receiver antenna may Add-to or
Subtract-from the direct signal from Transmitter. Directional
antennas may reduce affect of reflected signals.
ANTENNAS
for RECEIVER
not suitable for TX-CAM2p
Range and
Signal to Noise Ratio (SNR) may be improved by increasing gain of
antenna on Transmitter &/or Receiver. For maximum signal transfer TX
and RX antennas should be the same polarity, that is both oriented
Vertically or Horizontally.
 |
Cat
Code: Ant-SMB
$10
2.4 ~
2.5 GHz Antenna, ~ 3 dBi gain, ~ 50 ohms impedance. Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length:
~ 62 mm. Diameter: ~ 6 mm. Weight: ~ 2 grams.
Pictured with
discontinued
TX-MOD3, suits
TX-CAM2p,
TX-CAM2,
TX-BNC
SMB Connector (socket center contact)
|
 |
Cat Code:
Ant-Whip $20
< 20+
$10 >
Vertical Whip Antenna
Omni Directional 2.4 ~ 2.5 GHz, ~ 3 dBi gain, ~ 50 ohms
impedance. Antenna for Wireless LAN, WiFi Network, Wireless
ADSL, Video Transmitters, etc.
Length: ~ 107 mm
straight, ~ 87 mm folded. Diameter: ~ 9 mm. Weight: ~ 11
grams.
SMA male
Connector.
|

White or Black Colour
depending on stocks |
Cat Code:
Ant-W5dB
$20
< 20+
$10 >
Vertical Whip Antenna
non-directional 2.4 ~ 2.5 GHz, ~ 5 dBi
gain, ~ 50 ohms impedance.
Antenna for Wireless
LAN, WiFi Network, Wireless ADSL, Video Transmitters, etc.
Length: ~ 195 mm straight,
~ 170 mm folded. Diameter: ~ 13 mm @ Base ~ 6 mm @ Top.
Weight: ~ 30 grams.
SMA male Connector.
|
 |
Cat Code: Ant-W15dB
$169
High Gain Vertical Whip
Antenna 2.4 ~ 2.5 GHz, ~ 15 dBi gain, ~ 50 ohm impedance.
Beamwidth: Horizontal 360º, Vertical 11º. VSWR (Voltage
Standing Wave Ratio) ~ 1.5. Maximum Power 50 Watts. Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Length:
~ 1640 mm, ~ 1935 mm with Base Mount Tube. Diameter: ~ 42 mm @
Base ~ 20 mm main center section ~ 22 mm top cap. Weight: ~
680 grams ~ 950 grams with Mounting Tube & Clamp/Bracket.
data sheet
N
female Connector. <Adaptors
& Extension Cables>
|
 |
Cat
Code: Ant-Y8
$69
Discontinued
Cat Code: Ant-Y12
$89
Discontinued
Cat
Code: Ant-Y15 $79
Yagi
Antenna for Wireless LAN, WiFi
Network, Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5
GHz, ~ 15 dBi gain, ~ 50 ohms impedance. ~ 500 mm RG-58 Coax
cable. Dimensions (excluding Clamps) ~ 650 x 95 x 35 mm, ~ 680
grams.
Supplied with ~ 140 x 70 mm Aluminium mounting plate, Clamps,
etc. Pictured in Vertical Polarity orientation * Mast not
included.
SMA male Connector. <Adaptors &
Extension Cables>
|

 |
Cat
Code: Ant-Y17.5C
$99
Yagi
Antenna 2.4 ~ 2.5 GHz, ~ 17.5 dBi gain, ~ 50 ohms impedance.
Beamwidth: E23, H24. Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Dimensions (excluding Clamps) ~ 850 mm, ~ 75 mm diameter, ~
800 grams, ~ 500 mm RG-58 Coax cable. Supplied with Aluminium
mounting plate, Clamps, etc. Pictured in Vertical Polarity
orientation * Mast not included.
SMA male Connector. <Adaptors &
Extension Cables>
|
 |
Cat
Code: Ant-F16
$79
Antenna
for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc. COMPACT Flat 2.3 ~ 2.5 GHz, ~ 16 dBi gain,
~ 50 ohm impedance.
Beamwidth: ~ 27º (H) ~ 60º (V).
Supplied with versatile selection of mounting hardware for
Wall/Ceiling mounting & two Tubular Mast Clamps.
Dimensions (excludes Socket & Brackets) ~ 135 (W) ~ 455 (H) ~
30 mm (D), ~ 740 grams.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code:
Ant-F18 $99
COMPACT Flat 2.3 ~
2.5 GHz, ~ 18 dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 45º
(H) ~ 75º (V). Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc.
Supplied with
versatile selection of mounting hardware for Wall/Ceiling
mounting & two Tubular Mast Clamps.
Dimensions (excludes
Socket & Brackets) ~ 262 (W) ~ 262 (H) ~ 38 mm (D), ~ 950
grams.
Suitable for Indoor
and sheltered Outdoor use under eaves, etc
Pictured in Vertical
Polarity orientation.
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat Code: Ant-F20
$109
Compact Flat 2.4 ~ 2.5
GHz, ~ 20 dBi gain, ~ 50 ohm impedance. Beamwidth: E30º H90º.
Front:Back > 25dB. VSWR ~ 1.6. Maximum Power 200 Watts.
Antenna for Wireless LAN, WiFi Network, Wireless ADSL, Video
Transmitters, etc.
Supplied with 50~80 mm Tubular Mast Clamp. Panel ~ 294 (W) ~
330 (H) ~ 40 mm (D). Weight ~ 1.65 kg including mounting
bracket. Tilt +/- ~ 20º.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation.
data sheet
N female
Connector. <Adaptors & Extension
Cables>
|
 |
Cat
Code: Ant-P10
$69
COMPACT Semi-Parabolic 2.3 ~ 2.5 GHz, ~ 10.5 dBi gain, ~
50 ohm impedance. Beamwidth: ~ 30º (H) ~ 60º (V). Antenna for
Wireless LAN, WiFi Network, Wireless ADSL, Video Transmitters,
etc.
Supplied with Tubular Mast Clamp. Dimensions (excludes Socket
& Brackets) ~ 275 (W) ~ 90 (H) x ~ 58 mm (D), ~ 235 grams.
Suitable for Indoor and sheltered Outdoor use under eaves, etc
Pictured in Vertical Polarity orientation.
SMA female Connector. <Adaptors &
Extension Cables>
|
 |
Cat
Code: Ant-P24
$199
Grid-Parabolic Antenna for Wireless LAN, WiFi Network,
Wireless ADSL, Video Transmitters, etc. 2.4 ~ 2.5 GHz, ~ 24
dBi gain, ~ 50 ohm impedance. Beamwidth: ~ 11º (H) ~ 7º (V).
Front:Back ~ 25dB. VSWR ~ 1.5. Maximum Power 100 Watts.
Supplied with Clamps to suit 40 ~ 50 mm Tubular Mast, bracket
for Vertical or Horizontal mounting 60º Tilt in 10º
increments. Aluminium Grid (2 sections) ~ 1060 (W) ~ 600 (H)
mm assembled. Weight ~ 2.8 kg including mounting bracket.
Pictured in Horizontal Polarity orientation.
data sheet
N
female Connector. <Adaptors &
Extension Cables>
|
ADAPTORS
  |
Cat Code: SMAm-Nf
$10
SMA male (internal thread, pin contact, Hex Nut) to N
female. Suitable for P18G & P24G discontinued antennas. |
  |
Cat Code: SMAm-Nm
$10
SMA male (internal
thread, pin contact, Hex Nut) to N male. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas.
|
 |
Cat Code: SMAm-m
$10
SMA male (internal
thread, pin contact, Hex Nut) to SMA male. Suitable for
P10 antenna.
|
 |
Cat
Code: Cable-178/30
$19
30 cm
RG-178 Coax cable with SMA male & female connectors.
|
 |
Cat
Code: Cable-58/450
$39
~ 450 cm Coax Cable with SMA male & female connectors.
Attenuation 0.6 ~ 0.9 dB/metre @ 2 GHz., 0.8 ~
1.4 dB/metre @ 5.8 GHz
Cat
Code: Cable-23/450N
$39
not pictured
~ 450 cm Coax Cable with SMA & N male
connectors. Attenuation ~ 0.75 dB/metre @ 2.4
GHz, ~ 0.8~1.4 dB/metre @ 5.8 GHz. Suitable for
W12dB, W15dB, F16, F18, F20 & P24 antennas.
|
Parabolic
Yagi & Flat are directional antennas. Whip antennas when used
vertically are for most practical purposes omni or non
directional.
To maximise 'Range' minimise the length of Coax Cable between
Antenna and TX/RX.
|