Rear Vision 4.5"
Monitor & Waterproof Camera suitable for Rear Vision or Observation / Inspection
Systems in: Automobiles - Tractors - Buses - Cranes - Dozers - Boats - Aircraft
- Trains - Harvesters and other machinery and equipment used in the
Agricultural, Earthmoving, Transport and other industries.
Cat Code: RearView-M4.5
Rear Vision 4.5" Monitor & Waterproof Camera for
Rear Vision or Observation / Inspection Systems in: Automobiles - Tractors -
Buses - Cranes - Dozers - Boats - Aircraft - Trains - Harvesters and other
machinery and equipment used in the Agricultural, Mining, Earthmoving, Transport
and other industries.
$ ?
(Gold) click
here for details
$459 (A) Incl Tax
$499 (B) Incl Tax
Monitor pictured with
"Tinted Visor", "Sunshield & "Mounting Bracket".
Monitor displays Reverse (Mirror) Image.
CAMERA:
Image Sensor:
Image Sensor: 1/3 inch Charge Coupled Device (CCD)
Elements: 512 (H) x 582 (V).
Resolution: ~ 480 Horizontal Lines.
Sensitivity: ~ 0.5 lux @ F1.2
Automatic Electronic Shutter: 1/50 ~ 1/100 000 second
Output: Standard CCIR 75 ohm Composite Video via 5 pin 180° DIN Plug on ~ 500 mm
cable.
Lens: 2.9 mm Focal Length, F2.0
Approximate Width of
Vision: |
@ 1
metre |
@ 3
metres |
@ 4
metres |
@ 5
metres |
2.9 mm Lens |
1.65
metres |
4.96
metres |
6.62
metres |
8.3
metres |
Power Requirements:
12 Volts DC Regulated (from Monitor) via 5 pin 180° DIN Plug on ~ 500 mm cable.
Dimensions:
25 mm diameter, ~ 53 mm long, ~ 80 grams including cable & plug.
Other:
Waterproof Housing: Aluminium, Black anodised, threaded full length from ~ 10 mm
behind Front Flange, 1/4" UNC tapped thread centrally located at end.
Supplied with:
Seven Spacers & Angled Rings, Two knurled Ring Nuts & Rubber Seal Ring to mount
& Aim camera. Cable ~ 20 metres with 5 pin 180° DIN Plug & Socket for Monitor &
Camera.
Pictured without "Tinted Visor", "Sunshield" or
"Mounting Bracket".
MONITOR:
Display Type:
CRT 4.5 inch, Reverse (Mirror) Image.
Resolution: ~ 500 Horizontal Lines (@ center)
Sensitivity: ~ 0.5 to 2.0 v p-p, Negative Sync
Inputs:
Standard CCIR 75 ohm Composite Video via 5 pin 180° DIN socket at rear.
10 ~ 26 VDC via 4 Pin socket at rear, with Automotive Reverse Gear (+) input to
power-on in Reverse only.
Output:
12 Volts DC Regulated for Camera via 5 pin 180° DIN socket at rear.
Controls:
On / Off push-button on front.
Brightness Day / Night push-button on front.
Automatic (via Reverse Switch) or Manual On/Off push-button on front.
Vertical Hold rotary control at rear.
Brightness rotary slotted control on front.
Contrast rotary slotted control on front.
Power Requirements:
10 ~ 26 VDC
Dimensions:
~ 137 mm (W) ~ 126 mm (H) ~ 163 mm (D)
Weight ~ 1.1 kilograms
Supplied with:
Removable "Smoke Visor" for CRT to reduce on-screen glare from Daylight, Top and
Side "Sun Shield" (as shown in Picture at Top of this Page), metal "U" shaped
Dash Mount Bracket with three attachment Bolts & Nuts, two Bolts & Plastic Caps
for attaching Bracket to sides of Monitor, 4 pin plug with wires for Power
Supply & Reverse Switch input, two ~ 25 mm Rubber Grommets & short length of
Flexible conduit.
Use your Browser
"Back Button" to return to previous page
BUNDLED-PAKS
'exceptional value' completely DIY Plug-In installation click
here for details.