Use out-of-the-box or use the easy On-Screen Setup menu & 5 push-buttons to configure parameters to cope with difficult lighting.

Wide Angle 2.1 mm lens for 6.8 metre wide shots @ 3 metres, 25 mm for Full-Screen 'Cash Drawer' or 'Head & Shoulders' shot @ 5 metres.

Suitable for illumination levels common in Offices, Warehouses, Homes, Factories, Showrooms, etc., excels in difficult Back-Lit & High-Contrast situations.

Order Code: [Pixim-Mini] $119
$79 < 30 + >

Accessories
[REG12/1A] Security Camera Plug Pack $20
[Cable-VP*] Plug-In 20 m Security Camera Cable $25
Security Camera Microphone $20
 

 
Seawolf Digital Pixel System (Pixim) Image Sensor & Chipset this Security Camera solves many of the shortcomings of conventional CCD and CMOS sensors and is ideal for most common and many difficult Security Surveillance applications.

This Pixim Security Camera has a 3.6mm Board Lens & conventional IR-CUT Filter for improved focus & better Colour rendition in Infrared rich environments (Daylight, Incandescent Lamps, etc).

Connect directly to the Composite Video Input on most TVs and Recording Devices, if required a Microphone can be added and a single small diameter Cable used to carry Video, Audio & Power 20 or more metres.

Uitlising Pixim's 'Seawolf Solution' this Security Camera has an extraordinary 690 HTVL effective resolution, far better than conventional Security Cameras, HTVL Effective Specification.

Image Device: Progressive-Scan Seawolf Solution (768x548 Pixels) 758(H) 540(V) 409 320 Active Pixels ⅓" format 7 µm x 7 µm pixel size, CMY Colour Array PIXIM® Wide Dynamic Digital Pixel System®

Lens: Board Type 3.6 mm Focal Length, accessory Lenses: 2.1, 2.9, 5.7, 8, 12 & 25 mm (BL) types on this page, corners of image may be slightly cropped with 2.1 mm Lens, additional information here.

Video System: 2:1 Interlace switchable between PAL 50/625 or NTSC 60/525. PAL 50 Hz vertical, 15 625 Hz horizontal. Compatible with TV Systems in Australia, NZ, UK, USA, Japan, etc.

Video Output: Composite Video 75 ohms 1.14 V p-p, BNC socket on ~ 20 cm cable.

Sensor/DSP HTVL-effective Resolution: 690 HTVL-E better than Super-VHS near SDTV/DVD resolution. Pixim Whitepapers: HTVL Effective Specification & Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems

Sensor/DSP Horizontal Resolution: 540 HTVL, this value is provided for comparative purposes only.

Sensor/DSP Vertical Resolution: 460 VTVL, this value is provided for comparative purposes only, significantly better than conventional interlaced CCD sensors.

Sensitivity: ~ 0.1 Lux @ F1.2, 50 IRE, 25 fps, CMY (this value is provided for comparative purposes only).

Automatic Electronic Shutter (AES): 1/25 to 1/30 720 second.

Dynamic Range (more): 102 dB typically, 120 dB maximum, Dynamic Range is illustrated on this page.

Smear (more): Zero for most practical purposes, copes with highlights better than ordinary CCD cameras, Smear is illustrated on this page.

Spectral Response: ~ 400 to ~ 700 nm.

Signal to Noise ratio (SNR): up to 50 dB, measured with AGC off.

Noise Reduction: 3D, Motion Adaptive.

Flicker Reduction: 'Pixim' Enhanced Flicker Reduction.

White Balance (WB): Automatic Tracking 2200ºK ~ 10000ºK.

Gamma: 0.45.

On-Screen-Display Setup: All menu functions and parameters are easily set via Up/Down/Left/Right/Enter push button on Back of Camera.

Camera Setup: Due to ongoing product development all or some of the functions listed below may not be available with this Camera.

To Access: "Press & Hold Enter"
"WDR Control" Low / Normal / Medium / High / Presets.
"BLC" Off / On.
"White Balance" ATW / AWB
"AGC" Low / Normal / High
"Lens Select" Manual / DC.
"Fluorescent" Off / CRR.
"D/N Control" Off / Auto / GPIO.
Save & Exit / Reset Camera to Default settings / Cancel changes.
 
We suggest using Default settings with small changes to WDR, BLC, White Balance, AGC & Fluorescent as/if required.

Advanced Menu:

To Access: Press Left, Right, Left, Right & Down.
"Presets" Vivid / WD_Normal / Normal.
"Exposure" 50i, 25p.
"AGC" Custom Bias -18 to 18 / Limit 0 to 60.
"Range Ctrl" Low / Normal / Medium / High / Custom Bias -30 to 30 / Limit 0 to 36.
"Exposure Pref" Highlights / Shadows.
"Shutter Mode" Off / Auto / Manual Shutter Limit 2X -25FPS, 4X-12FPS, 8X-6FPS, 16X-3FPS, 32X-1FPS, 64X-1FPS.
"Meter Method" Median / Mean.
"Gain Mode: AGC / Manual -48 to 60.
"Range Mode" Auto / Manual 0 to 30.
"Transitions" Presets Slow / Norm / Fast. Exposure Transitions - Filter 0 to 4000, Hyst 0 to 4000, Trans 0 to 4000. Range Transitions - Filter 0 to 4000, Hyst 0 to 4000, Trans 0 to 4000.
"White Balance" Mode - ATW Xtnd / ATW Normal / ATW Desat / AWB / Manual Adj Mode Kelvin / R/B. Meter Method Mean / Median.
"Viewing" PTZ - Zoom 1 to 4, Pan -100 to 100, Tilt -100 to 100, Flip - Off / Horiz / Vert / Both. Render Intent - Movie / Info. Privacy Mask Setup - Off / Colour White-Black-Red. ID Display - On / Off. ID Position - Up-Left, Up-Center, Up-Right, Down-Left, Down Right.
"Setup" Most of the parameters except Video Standard PAL / NTSC & Video IRE Level in this section are not relevant to this camera.

Power Requirements: 12 Volts DC Regulated, ~ 150 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+) on ~ 20 cm cable.

Dimensions (mm): Camera Body ~ 42 x 42 x 38, excludes Mounting Bracket.

Mass: ~ 115 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.