HIGH RESOLUTION Mini
Colour CCTV Video Surveillance
Camera. Connect to 12 VDC & Composite Video AV input on TVs, VCRs, Capture
Cards, etc. 1/3 inch LOW BLEMISH CCD
Image Sensor, Digital Signal Processing, suitable for normal light levels in
Homes, Offices, Showrooms etc. For: CCTV Video Surveillance Observation,
Security & many other Closed Circuit Television applications including image
capture, machine vision, Web-Cams, inspection, rear vision automotive CCTV and
general surveillance. Use CCTV - TV / VCR Interface Module connected to TV
antenna system for viewing / recording on all TVs and VCRs. Use our PC Digital
Video Recording Systems for High Resolution image capture with Motion Detection,
Masking, Dial-Up, Paging, LAN & other facilities.
Cat Code:
MINI-C46
1/3" CCD
Image Sensor * HIGH Resolution *
Digital Signal Processing Mini Wall / Ceiling Colour Camera
with 3.6 mm
Board Lens
Only ! $199
with 3.6 mm Lens * with 25 mm Lens
HIGH
RESOLUTION * 1/3"
LOW BLEMISH CCD Image Sensor *
Mini Wall / Ceiling COLOUR CCTV
Video Surveillance Camera *Suitable for average light levels in Homes, Shops,
Showrooms, Offices, Warehouses, etc * DIY Plug-In installation when purchased
with Plug Pack and Cable/Adaptor Set.
*
Click on underlined items for additional information *
Need Sound ? click
here
fitted with
Exposure / Glare Reduction Filter + $15
Use this to reduce Over-Exposure and Glare with OUTDOOR DAYLIGHT images,
click here for more information.
Optional lens is
supplied fitted to camera in place of standard lens, all lenses suitable for
this Camera are listed near bottom of this page, click on the underlined
Lenses
link for prices.
Video Output: 1 v p-p Composite Video 75 ohms, suit
Australian TV, VCR, AV & Video inputs, BNC socket, ~ 30 cm cable.
Horizontal Resolution:
520 + lines. Better than VHS * Near
Super-VHS resolution.
Minimum Illumination: ~ 5 lux
@ F1.2.
Automatic Electronic Shutter (AES): Linear 1/50 to
1/100 000 second, 20 milliseconds to 10 microseconds.
Automatic Gain Control: Yes.
Signal to Noise ratio: ~ 46 dB.
Power Requirements: 12 Volts DC Regulated, ~ 270
milliamps, 2.1 x 5.5. mm DC socket ~ 30 cm cable.
Back-Light Compensation: Yes.
White Balance: Automatic.
MicroFine Focussing: Yes.
Dimensions: ~ 45 mm Wide (excluding Bracket &
Mounts), ~ 44 mm High, ~ 40 mm Deep, ~ 105 grams.
Made in: Taiwan.
Manufacturer's Experience: 15 +
Years in CCTV.
Accessories:
Plug-In DIY AV 20 metre Cable / Adaptor Set: 20
metre AV Cable with moulded Plugs & Socket. Two RCA Plugs & DC Plug for Camera
end. Two RCA Plugs for input device, DC Socket for Plug-Pack. One BNC-RCA
Adaptor VCR, Quad, Switcher, Multiplexer, Monitor, Transmitter, etc.
