|
DIY Plug-In installation when purchased with
Security
Camera Cable-VP &
Plug Pack REG12/1.0A.
Video System: PAL
Colour fully compatible with Australian TV System.
Image Device:
795 (H) x 596 (V)
473 820 Pixel 752 (H) x 582 (V) effective
⅓"
SONY
ICX639BKA
Super HAD II CCD.
*CCD=CCD image sensor "Super
HAD CCD Ⅱ" is a trademark of Sony Corporation. The "Super
HAD CCD Ⅱ" is a version of Sony's high performance CCD HAD
(Hole-Accumulation Diode) sensor with realized sensitivity
(typical) of 1000mV or more per 1µm2 (Color: F5.6/ BW: F8
in 1 s accumulation equivalent.)
click on images to
enlarge
Lens: Variable
Focal Length 3.7 mm ~ 12 mm Tamron Automatic Iris with
Potentiometer Level adjustment copes with High levels of
illumination with negligible smear, passes more light and
provides greater depth-of-field than ordinary fixed Iris Lenses.
Under some lighting conditions image may be affected by
internal reflections between Lens & Dome, these are usually
insignificant * There are no Accessory
Lenses for this Camera,
additional
Security Camera Lens information.
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation:
Internal.
Video Output: 1.14 V
p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket, ~ 30 cm cable.
Horizontal Pixels: 720 +
(this value is provided for comparative purposes only) better
than Super-VHS resolution near DTV / DVD resolution.
Minimum Illumination:
0.5 lux @ F1.2 in Night mode 10 IRE (this value is provided for
comparative purposes only).
Movable Infrared Optical Filter:
Switchable On / Off.
In Day mode (well lit,
colour) mechanism automatically positions
IR-CUT optical filter between Lens and Image Sensor to exclude
Infrared radiation that would otherwise adversely affect colour
reproduction, this ensures colour
rendition not possible with ordinary non-filtered or
notch-filter type Day/Night cameras.
In Night mode (low
light) mechanism automatically removes IR-CUT
optical filter boosting low light and Infrared sensitivity, the
result is significantly better night images using an
Infrared Illuminator or with Infrared
rich light sources.
Infrared Response
without Infrared filter is ~ 700 to ~
1100 nm better than a
'CCTV
notch IR Filter',
additional
Security Camera Infrared Night Vision information.
Switch-Over/Colour-Killer points are: Colour to
Monochrome
~ 3 Lux, Monochrome
to Colour ~ 7 Lux.
Spectral Response:
~ 400 to ~ 1100 nm with Infrared
'CUT' Filter 'out' of optical path, additional
CCTV Infrared Night Vision information.
Signal to Noise ratio
(SNR): ~ 50 dB, measured with AGC off.
Automatic Electronic Shutter (ELC):
1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds,
additional
CCTV Automatic Electronic Shutter information.
Automatic Iris (ALC):
Fixed 20 millisecond shutter speed
eliminates smear associated with High Shutter Speeds.
ELC (Automatic Electronic
Shutter) / ALC (Automatic Iris):
Switchable, (DIP
switch 1).
Automatic Gain Control
(AGC): Switchable On / Off, (DIP switch 2).
White
Balance: AWB or ATW Switchable, (DIP switch 3).
Back Light
Compensation (BLC): Switchable On / Off, (DIP switch 4).
Mirror Image:
Switchable On / Off, (DIP switch
5).
Motorised IR Cut Filter:
Switchable D/N = On / DAY = Off,
(DIP switch 6).
Digital Slow Shutter (Frame
Integration):
Switchable On /
Off, (DIP switch 7).
Gamma: 0.45.
Power Requirements: 12
~ 28 Volts DC
or 10 ~ 30 volts ac,
100~200 mA, via screw terminal block, ~ 30 cm cable.
Dimensions: ~
136 mm Diameter, ~ 100 mm Deep, ~ 780 grams.
Made in Taiwan in an
ISO 9001 certified factory.
Manufacturer's
Experience: 15 + Years.
Need Sound ?
Tiny Microphone & Pre-Amplifier |
Ideal
for use with 720 H-Pixel
