PAN & TILT:
Pan Range: 360º.
Pan Speed: 0.5º ~ 240º
per second.
Tilt Range: 0º ~ 100º.
Tilt Speed: 0.5º ~
120º per second.
Preset Positions: 128
maximum.
Auto Cruising: 1 track.
RS485: 2-wire RS485,
via ~ 50 cm wires.
RS485:
Protocols COP-02, PELCO™-P
(9600bps), PELCO™-P
(4800bps), PELCO™-D
(2400bps).
When used with
Wireless Video Two-Way Audio RS485 Alarm I/O Web Cam Server
Video Recorder select EP
Pelco-D 2400 bps.
CAMERA:
Video
System: PAL Colour fully compatible with Australian TV System.
Image Device: 752 (H) x 582 (V) 437
664 Pixel
LOW
BLEMISH 1/4" inch SONY Super HAD MicroLens Interline
Transfer CCD Sensor.
 for:
Super HAD MicroLens information @ "SONY"
Lens: Motorised
Focus/Zoom/Iris, 22X Optical ZOOM, focal length 3.9 mm ~ 85.8
mm, Automatic Iris, Automatic / Manual Focus.
Scanning System: 2 : 1
Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.
Synchronisation:
Internal.
Video Output: 1.14 V
p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video
inputs, BNC socket on ~ 20 cm Cable.
Horizontal Pixels: 700
+ (this value is provided for comparative purposes only) Better
than Super-VHS resolution.
Sensitivity: ~ 0.1.lux
@ F1.6, AGC On, this value is provided for comparative
purposes only.
Automatic Electronic
Shutter (AES): 1/50 to 1/100 000 second or Fixed 1/100, 1/120,
1/250, 1/500, 1/1000, 1/2000, 1/4000 or 1/10000 additional
information
here. (see Frame-Integration below).
Automatic Gain Control
(AGC): On/Off, 0 ~ 24 dB 9 steps.
Signal to Noise ratio:
~ 48 dB, measured with AGC off.
Back-Light
Compensation (BLC): Super / 48 zone.
White Balance: ATW /
AWB / FIX (zero colour rolling).
Other Functions: Title, ALC, Enhancer,
Zoom/Focus Speed, Horizontal/Vertical Reverse, Gamma, Mask,
Freeze, Cross Line, Language, Positive/Negative, etc.
General:
Supplied with Wall Bracket.
Power Requirements: 12
Volts DC Regulated ~ 500 mA (~ 800 mA Peak when Zoom/Focus/IR-CUT
motor operates) via
2.1 x 5.5 mm DC socket, center
pin = (+),
~ 20 cm cable.
Manufacturer's
Experience: 15 + Years, ISO 9001 Certified.
MORE:
to
view pages from
User's Manual.

|